Depends on the library. You can't define a single TSM library across
multiple physical libraries.
As long as you can put more than two drives in the library, you can
configure those into TSM.
Kelly J. Lipp
Storage Solutions Specialists, Inc.
PO Box 51313
Colorado Springs CO 80949-1313
(719) 531-5926
Fax: (240) 539-7175
Email: [EMAIL PROTECTED] or [EMAIL PROTECTED]
www.storsol.com
www.storserver.com
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Doug McLauchlan
Sent: Wednesday, January 31, 2001 6:37 PM
To: [EMAIL PROTECTED]
Subject: 3570 MAGSTAR DRIVES
Hi all, we have 2 3570B12 Magstar units each has 2 drives, (each unit are
on separate scsi's but same address). I currently have 2 libraries defined
in ADSM each with 1 unit in each. I want to be able to have 1 library with
all 4 drives in it but don't know if this is possible because the element
numbers for both unit's are 16 & 17. Has anyone been able to configure more
than 2 3570 drives in a library ?
We have TSM 3.7.2 & AIX 4.3.2.0
Thanks
Doug McLauchlan
Woolworths (NZ) Ltd
email [EMAIL PROTECTED]
DISCLAIMER: "The information in this email and in any attachments is
confidential and intended solely for the attention and use of the
addressee(s). If this email is not intended for you, you must not use, read,
distribute or copy it. If you have received this email by mistake please
call the sender immediately on 64-9-2620772 and erase the email and any
attachments, and any copies of the same. Internet communications are not
secure and therefore Woolworths (NZ) Ltd does not accept legal
responsibility for the contents of this message. Any views or opinions
expressed are solely those of the author and do not necessarily represent
those of Woolworths (NZ) Ltd unless specifically stated."