On June 14, 2023 10:18:13 AM EDT, Luis <l...@ck-weine.ch> wrote: > According to plan9.ini(8): > wpapsk=password > WPA/WPA2 encryption is detected automatically and a prompt > for the password will appear when using the WIFI interface > for netbooting. To avoid the prompt, the password can be > specified with the boot parameter above. > > However, I do not get said prompt, and when I try to netboot with this > configuration: > ether0=type=iwl > essid=myessid > bootargs=tls!-g 192.168.1.1 ether /net/ether0 > That (obviously, as I did not enter my wifi creds) fails with > "ipconfig: no success with DHCP." > > It works if I escape to shell with !rc and run aux/wpa manually. > > How do I get aux/wpa to automatically prompt for a password OR to > permanently store the password for use at boot time? >
not sure what other problems there may be, but make sure essid appears on the same line as ether0. sl ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/Tf639303c48fd1149-M0708981098fd644d4956a18f Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
