> I'm having trouble installing on a clean disk with the latest iso (2010/3/12). > > I first removed all the partition info (using fdisk on a gparted liveCD) so > that the disk was clear. I then booted Plan9, and when it asked to install a > MBR, it returned an error that disk/fdisk failed. This then caused parted to > restart in a loop... Unfortunately it did not give me much additional info.
if you could send me some information (off list), i'll take a look at this. 1. the exact error message that you see. 2. at the installer prompt, after then fdisk error, the output of "!cat /dev/kmesg". 3. the output of lspci -n (or similar) from linux (or whatever). - erik
