That's weird, I didn't change anything recently. Do you know which change in sources broke your device?
On Mon, Mar 15, 2010 at 1:27 AM, erik quanstrom <quans...@quanstro.net> wrote: > i am now unable to copy more than about 10mb at a time > off the usb sd reader i've been using. usb/disk isn't just quitting, > the endpoint is dead. the console says only > usb/disk... usb/disk: : 062800 > disk: reset: device is detached > it used to work, so maybe something new's come up. > the last copy i made was 20091020. > > here's the output with debug on: > > usb/disk: : 062800 > qhintr: td 0xf004e780 csw 0x10008d40 error 0x40 endpoint stalled > ehci io 0xf2c912e0 qh 0xf004e600 timed out (no intr?) > ehci io 0xf2c912e0 qh 0xf004e600 timed out (no intr?) > ehci io 0xf2c912e0 qh 0xf004e600 timed out (no intr?) > ehci io 0xf2c912e0 qh 0xf004e600 timed out (no intr?) > qhintr: td 0xf004e780 csw 0xd8d50 error 0x50 babble detected > qhintr: td 0xf004e780 csw 0x88248 error 0x48 transaction error > qhintr: td 0xf004e780 csw 0x88248 error 0x48 transaction error > qhintr: td 0xf004e780 csw 0x88248 error 0x48 transaction error > qhintr: td 0xf004e780 csw 0x88248 error 0x48 transaction error > usb epctl detach ep7.0 > disk: reset: device is detached > usbclose q 0x20 fid 616 ref 2 > ehci: epclose ep7.2 > ehci: cancelio for qh 0xf004e700 state idle > ehci: doorbell > ehci: qhcoherency: doorbell 1 > usb: ep7.2 0xf2c91460 released > usbclose q 0x24 fid 620 ref 2 > ehci: epclose ep7.1 > ehci: cancelio for qh 0xf004e680 state idle > ehci: doorbell > ehci: qhcoherency: doorbell 1 > usb: ep7.1 0xf2c91520 released > usbclose q 0x1c fid 617 ref 2 > ehci: epclose ep7.0 > ehci: cancelio for qh 0xf004e600 state idle > ehci: doorbell > ehci: qhcoherency: doorbell 1 > usb: ep7.0 0xf343dbe0 released > > - erik > >
