Hi Sudheer,
As suggested by Christian, check if zpool clear brings the pool
online. There
was a bug which recently got fixed, which will take care of this
problem. Your
Solaris version is on the lower side.
Thanks,
Deepak.
On 01/26/12 09:06 PM, Christian Meier wrote:
Hi Sudheer
1)The FC Luns are available after reboot.
ok, you are using FC Luns and do not enable MPXIO?
2) The Os level of the machine : Oracle Solaris 10 8/11
s10x_u10wos_17b X86.
3)bash-3.2# zpool status
pool: pool name
state: UNAVAIL
status: One or more devices could not be opened. There are insufficient
replicas for the pool to continue functioning.
action: Attach the missing device and online it using 'zpool online'.
see: http://www.sun.com/msg/ZFS-8000-3C
scan: none requested
config:NAME STATE READ WRITE CKSUM
pool name UNAVAIL 0 0 0 insufficient replicas
c5t1d1 UNAVAIL 0 0 0 cannot open
4) at the time of reboot the machine itself imports the zpool& no
need to import it again.
bash-3.2# zpool import pool name
cannot import 'pool name': a pool with that name is already
created/imported,
and no additional pools with that name were found.
And the important thing is when I export& import the zpool, then I
was able to access it.
As Gary and Bob mentioned, I saw this Issue with ISCSI Devices.
Instead of export / import is a zpool clear also working?
mpathadm list LU
mpathadm show LU /dev/rdsk/c5t1d1s2
Regards
Christian
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
