On Thu, Jan 26, 2012 at 04:36:58PM +0100, Christian Meier wrote:
> Hi Sudheer
> >
> > 3)bash-3.2# zpool status
> > pool: pool name
> > state: UNAVAIL
> > status: One or more devices could not be opened. There are insufficient
> > replicas for the pool to continue functioning.
> > action: Attach the missing device and online it using 'zpool online'.
> > see: http://www.sun.com/msg/ZFS-8000-3C
> > scan: none requested
> > config:NAME STATE READ WRITE CKSUM
> > pool name UNAVAIL 0 0 0 insufficient replicas
> > c5t1d1 UNAVAIL 0 0 0 cannot open
This means that, at the time of that import, device c5t1d1 was not
available. What does `ls -l /dev/rdsk/c5t1d1s0' show for the physical
path?
> > And the important thing is when I export & import the zpool, then I
> > was able to access it.
Yes, later the device became available. After the boot, `svcs' will
show you the services listed in order of their completion times. The
ZFS mount is done by this service:
svc:/system/filesystem/local:default
The zpool import (without the mount) is done earlier. Check to see
if any of the FC services run too late during the boot.
> As Gary and Bob mentioned, I saw this Issue with ISCSI Devices.
> Instead of export / import is a zpool clear also working?
>
> mpathadm list LU
> mpathadm show LU /dev/rdsk/c5t1d1s2
--
-Gary Mills- -refurb- -Winnipeg, Manitoba, Canada-
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
