nothing to worry about as for dd you need s? in addition to c8t0d0 Sent from my iPad Hung-Sheng Tsao ( LaoTsao) Ph.D
On Aug 9, 2011, at 4:51, Lanky Doodle <lanky_doo...@hotmail.com> wrote: > Hiya, > > Is there any reason (and anything to worry about) if disk target IDs don't > start at 0 (zero). For some reason mine are like this (3 controllers - 1 > onboard and 2 PCIe); > > AVAILABLE DISK SELECTIONS: > 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> > /pci@0,0/pci10de,cb84@5/disk@0,0 > 1. c8t1d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> > /pci@0,0/pci10de,cb84@5/disk@1,0 > 2. c9t7d0 <ATA-HitachiHDS72302-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@7,0 > 3. c9t8d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@8,0 > 4. c9t9d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@9,0 > 5. c9t10d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@a,0 > 6. c9t11d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@b,0 > 7. c9t12d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@c,0 > 8. c9t13d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@d,0 > 9. c9t14d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,376@a/pci1000,3140@0/sd@e,0 > 10. c10t8d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@8,0 > 11. c10t9d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@9,0 > 12. c10t10d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec > 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@a,0 > 13. c10t11d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec > 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@b,0 > 14. c10t12d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec > 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@c,0 > 15. c10t13d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec > 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@d,0 > 16. c10t14d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec > 252> > /pci@0,0/pci10de,377@f/pci1000,3140@0/sd@e,0 > > So apart from the onboard controller, the tx (where x is the number) doesn't > start at 0. > > Also, I am trying to make disk LEDs blink by using dd so I can match up disks > in Solaris to the physical slot, but I can't work out the right command; > > admin@ok-server01:~# dd if=/dev/dsk/c9t7d0 of=/dev/null > dd: /dev/dsk/c9t7d0: open: No such file or directory > > admin@ok-server01:~# dd if=/dev/rdsk/c9t7d0 of=/dev/null > dd: /dev/rdsk/c9t7d0: open: No such file or directory > > Thanks > -- > This message posted from opensolaris.org > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
