Hiya,
Is there any reason (and anything to worry about) if disk target IDs don't
start at 0 (zero). For some reason mine are like this (3 controllers - 1
onboard and 2 PCIe);
AVAILABLE DISK SELECTIONS:
0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63>
/pci@0,0/pci10de,cb84@5/disk@0,0
1. c8t1d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63>
/pci@0,0/pci10de,cb84@5/disk@1,0
2. c9t7d0 <ATA-HitachiHDS72302-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@7,0
3. c9t8d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@8,0
4. c9t9d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@9,0
5. c9t10d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@a,0
6. c9t11d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@b,0
7. c9t12d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@c,0
8. c9t13d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@d,0
9. c9t14d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,376@a/pci1000,3140@0/sd@e,0
10. c10t8d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@8,0
11. c10t9d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@9,0
12. c10t10d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@a,0
13. c10t11d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@b,0
14. c10t12d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@c,0
15. c10t13d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@d,0
16. c10t14d0 <ATA -Hitachi HDS7230-A5C0 cyl 60798 alt 2 hd 255 sec 252>
/pci@0,0/pci10de,377@f/pci1000,3140@0/sd@e,0
So apart from the onboard controller, the tx (where x is the number) doesn't
start at 0.
Also, I am trying to make disk LEDs blink by using dd so I can match up disks
in Solaris to the physical slot, but I can't work out the right command;
admin@ok-server01:~# dd if=/dev/dsk/c9t7d0 of=/dev/null
dd: /dev/dsk/c9t7d0: open: No such file or directory
admin@ok-server01:~# dd if=/dev/rdsk/c9t7d0 of=/dev/null
dd: /dev/rdsk/c9t7d0: open: No such file or directory
Thanks
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
