Thank goodness! Where, specifically, does one obtain this firmware for
SPARC?
On 07/07/10 17:04, Daniel Bakken wrote:
Upgrade the HBA firmware to version 1.30. We had the same problem, but
upgrading solved it for us.
Daniel Bakken
On Wed, Jul 7, 2010 at 1:57 PM, Joeri Vanthienen
<m...@joerivanthienen.be <mailto:m...@joerivanthienen.be>> wrote:
Hi,
We're using the following components with snv134:
- 1068E HBA (supermicro)
- 3U SAS / SATA Expander Backplane with dual LSI SASX28 Expander
Chips (supermicro)
- WD RE3 disks
We've got the following error messages:
Jul 7 10:09:12 sanwv01 scsi: [ID 107833 kern.warning] WARNING:
/p...@0,0/pci8086,3...@7/pci15d9,a...@0/s...@b,0 (sd2):
Jul 7 10:09:12 sanwv01 incomplete read- retrying
Jul 7 10:09:17 sanwv01 scsi: [ID 243001 kern.warning] WARNING:
/p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:17 sanwv01 mpt_handle_event_sync:
IOCStatus=0x8000, IOCLogInfo=0x31123000
Jul 7 10:09:17 sanwv01 scsi: [ID 243001 kern.warning] WARNING:
/p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:17 sanwv01 mpt_handle_event: IOCStatus=0x8000,
IOCLogInfo=0x31123000
Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info
<http://kern.info>] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for
target 21.
Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b,
scsi_state=0xc
Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info
<http://kern.info>] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for
target 21.
Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b,
scsi_state=0xc
Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info
<http://kern.info>] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for
target 21.
Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b,
scsi_state=0xc
Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info
<http://kern.info>] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for
target 21.
Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b,
scsi_state=0xc
Jul 7 10:09:21 sanwv01 smbsrv: [ID 138215 kern.notice] NOTICE:
smbd[WINDVISION\franz]: testshare share not found
Jul 7 10:09:26 sanwv01 scsi: [ID 243001 kern.warning] WARNING:
/p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:09:26 sanwv01 SAS Discovery Error on port 0.
DiscoveryStatus is DiscoveryStatus is |SMP timeout|
Jul 7 10:10:20 sanwv01 scsi: [ID 107833 kern.warning] WARNING:
/p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0):
Jul 7 10:10:20 sanwv01 Disconnected command timeout for
Target 21
After this message, the pool is unavailable over iscsi. We can't run
the format command or zpool status command anymore. We have to
reboot the server. This happens frequently for different Targets.
The stock firmware on the HBA is 1.26.01
--
This message posted from opensolaris.org <http://opensolaris.org>
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org <mailto:zfs-discuss@opensolaris.org>
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
