Hi, We're using the following components with snv134: - 1068E HBA (supermicro) - 3U SAS / SATA Expander Backplane with dual LSI SASX28 Expander Chips (supermicro) - WD RE3 disks
We've got the following error messages: Jul 7 10:09:12 sanwv01 scsi: [ID 107833 kern.warning] WARNING: /p...@0,0/pci8086,3...@7/pci15d9,a...@0/s...@b,0 (sd2): Jul 7 10:09:12 sanwv01 incomplete read- retrying Jul 7 10:09:17 sanwv01 scsi: [ID 243001 kern.warning] WARNING: /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:17 sanwv01 mpt_handle_event_sync: IOCStatus=0x8000, IOCLogInfo=0x31123000 Jul 7 10:09:17 sanwv01 scsi: [ID 243001 kern.warning] WARNING: /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:17 sanwv01 mpt_handle_event: IOCStatus=0x8000, IOCLogInfo=0x31123000 Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, scsi_state=0xc Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, scsi_state=0xc Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, scsi_state=0xc Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, scsi_state=0xc Jul 7 10:09:21 sanwv01 smbsrv: [ID 138215 kern.notice] NOTICE: smbd[WINDVISION\franz]: testshare share not found Jul 7 10:09:26 sanwv01 scsi: [ID 243001 kern.warning] WARNING: /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:09:26 sanwv01 SAS Discovery Error on port 0. DiscoveryStatus is DiscoveryStatus is |SMP timeout| Jul 7 10:10:20 sanwv01 scsi: [ID 107833 kern.warning] WARNING: /p...@0,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): Jul 7 10:10:20 sanwv01 Disconnected command timeout for Target 21 After this message, the pool is unavailable over iscsi. We can't run the format command or zpool status command anymore. We have to reboot the server. This happens frequently for different Targets. The stock firmware on the HBA is 1.26.01 -- This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
