psrinfo -pv shows:
The physical processor has 8 virtual processors (0-7) x86 (AuthenticAMD 100F91 family 16 model 9 step 1 clock 200 MHz) AMD Opteron(tm) Processor 6128 [ Socket: G34 ] On Sat, May 15, 2010 at 8:35 PM, Dennis Clarke <dcla...@blastwave.org>wrote: > ----- Original Message ----- > From: Thomas Burgess <wonsl...@gmail.com> > Date: Saturday, May 15, 2010 8:09 pm > Subject: Re: [zfs-discuss] Opteron 6100? Does it work with opensolaris? > To: Orvar Korvar <knatte_fnatte_tja...@yahoo.com> > Cc: zfs-discuss@opensolaris.org > > > > Well i just wanted to let everyone know that preliminary results are > good. > > The livecd booted, all important things seem to be recognized. It > > sees all > > 16 gb of ram i installed and all 8 cores of my opteron 6128 > > > > The only real shocker is how loud the norco RPC-4220 fans are (i have > > another machine with a norco 4020 case so i assumed the fans would be > > similar.....this was a BAD assumption) This thing sounds like a hair > > dryer > > > > Anyways, I'm running the install now so we'll see how that goes. It > > did take > > about 10 minutes to "find a disk" durring the installer, but if i > remember > > right, this happened on other machines as well. > > > > Once you have the install done could you post ( somewhere ) what you see > during a single user mode boot with options -srv ? > > I would like to see all the gory details. > > Also, could you run "cpustat -h" ? > > At the bottom, according to usr/src/uts/intel/pcbe/opteron_pcbe.c you shoud > see : > > See "BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h > Processors" (AMD publication 31116) > > The following registers should be listed : > > #define AMD_FAMILY_10h_generic_events > \ > { "PAPI_tlb_dm", "DC_dtlb_L1_miss_L2_miss", 0x7 }, \ > { "PAPI_tlb_im", "IC_itlb_L1_miss_L2_miss", 0x3 }, \ > { "PAPI_l3_dcr", "L3_read_req", 0xf1 }, \ > { "PAPI_l3_icr", "L3_read_req", 0xf2 }, \ > { "PAPI_l3_tcr", "L3_read_req", 0xf7 }, \ > { "PAPI_l3_stm", "L3_miss", 0xf4 }, \ > { "PAPI_l3_ldm", "L3_miss", 0xf3 }, \ > { "PAPI_l3_tcm", "L3_miss", 0xf7 } > > > You should NOT see anything like this : > > r...@aequitas:/root# uname -a > SunOS aequitas 5.11 snv_139 i86pc i386 i86pc Solaris > r...@aequitas:/root# cpustat -h > cpustat: cannot access performance counters - Operation not applicable > > > ... as well as psrinfo -pv please ? > > > When I get my HP Proliant with the 6174 procs I'll be sure to post whatever > I see. > > Dennis >
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss