hey, when i do this single user boot, is there anyway to capture what pops
on the screen? It's a LOT of stuff.
anyways, it seems to work fine when i do singleuser -srv
cpustat -h lists exactly what you said it should plus a lot more (though the
"more" is above, so like you said, it shows what it should show at the
bottom)
I'll capture all that later and post it.
On Sat, May 15, 2010 at 8:35 PM, Dennis Clarke <dcla...@blastwave.org>wrote:
> ----- Original Message -----
> From: Thomas Burgess <wonsl...@gmail.com>
> Date: Saturday, May 15, 2010 8:09 pm
> Subject: Re: [zfs-discuss] Opteron 6100? Does it work with opensolaris?
> To: Orvar Korvar <knatte_fnatte_tja...@yahoo.com>
> Cc: zfs-discuss@opensolaris.org
>
>
> > Well i just wanted to let everyone know that preliminary results are
> good.
> > The livecd booted, all important things seem to be recognized. It
> > sees all
> > 16 gb of ram i installed and all 8 cores of my opteron 6128
> >
> > The only real shocker is how loud the norco RPC-4220 fans are (i have
> > another machine with a norco 4020 case so i assumed the fans would be
> > similar.....this was a BAD assumption) This thing sounds like a hair
> > dryer
> >
> > Anyways, I'm running the install now so we'll see how that goes. It
> > did take
> > about 10 minutes to "find a disk" durring the installer, but if i
> remember
> > right, this happened on other machines as well.
> >
>
> Once you have the install done could you post ( somewhere ) what you see
> during a single user mode boot with options -srv ?
>
> I would like to see all the gory details.
>
> Also, could you run "cpustat -h" ?
>
> At the bottom, according to usr/src/uts/intel/pcbe/opteron_pcbe.c you shoud
> see :
>
> See "BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
> Processors" (AMD publication 31116)
>
> The following registers should be listed :
>
> #define AMD_FAMILY_10h_generic_events
> \
> { "PAPI_tlb_dm", "DC_dtlb_L1_miss_L2_miss", 0x7 }, \
> { "PAPI_tlb_im", "IC_itlb_L1_miss_L2_miss", 0x3 }, \
> { "PAPI_l3_dcr", "L3_read_req", 0xf1 }, \
> { "PAPI_l3_icr", "L3_read_req", 0xf2 }, \
> { "PAPI_l3_tcr", "L3_read_req", 0xf7 }, \
> { "PAPI_l3_stm", "L3_miss", 0xf4 }, \
> { "PAPI_l3_ldm", "L3_miss", 0xf3 }, \
> { "PAPI_l3_tcm", "L3_miss", 0xf7 }
>
>
> You should NOT see anything like this :
>
> r...@aequitas:/root# uname -a
> SunOS aequitas 5.11 snv_139 i86pc i386 i86pc Solaris
> r...@aequitas:/root# cpustat -h
> cpustat: cannot access performance counters - Operation not applicable
>
>
> ... as well as psrinfo -pv please ?
>
>
> When I get my HP Proliant with the 6174 procs I'll be sure to post whatever
> I see.
>
> Dennis
>
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
