Hi
did you get a core dump?
would be nice to see the core file to get an idea of what dumped core,
might configure coreadm if not already done
run coreadm first, if the output looks like
# coreadm
global core file pattern: /var/crash/core.%f.%p
global core file content: default
init core file pattern: core
init core file content: default
global core dumps: enabled
per-process core dumps: enabled
global setid core dumps: enabled
per-process setid core dumps: disabled
global core dump logging: enabled
then all should be good, and cores should appear in /var/crash
otherwise the following should configure coreadm:
coreadm -g /var/crash/core.%f.%p
coreadm -G all
coreadm -e global
coreadm -e per-process
coreadm -u to load the new settings without rebooting.
also might need to set the size of the core dump via
ulimit -c unlimited
check ulimit -a first.
then rerun test and check /var/crash for core dump.
If that fails a truss via say truss -fae -o /tmp/truss.out lucreate -c
ufsBE -n zfsBE -p rootpool
might give an indication, look for SIGBUS in the truss log
NOTE, that you might want to reset the coreadm and ulimit for coredumps
after this, in order to not risk filling the system with coredumps in
the case of some utility coredumping in a loop say.
Enda
On 11/05/08 13:46, Krzys wrote:
>
> On Wed, 5 Nov 2008, Enda O'Connor wrote:
>
>> On 11/05/08 13:02, Krzys wrote:
>>> I am not sure what I did wrong but I did follow up all the steps to get my
>>> system moved from ufs to zfs and not I am unable to boot it... can anyone
>>> suggest what I could do to fix it?
>>>
>>> here are all my steps:
>>>
>>> [00:26:38] @adas: /root > zpool create rootpool c1t1d0s0
>>> [00:26:57] @adas: /root > lucreate -c ufsBE -n zfsBE -p rootpool
>>> Analyzing system configuration.
>>> Comparing source boot environment <ufsBE> file systems with the file
>>> system(s) you specified for the new boot environment. Determining which
>>> file systems should be in the new boot environment.
>>> Updating boot environment description database on all BEs.
>>> Updating system configuration files.
>>> The device </dev/dsk/c1t1d0s0> is not a root device for any boot
>>> environment; cannot get BE ID.
>>> Creating configuration for boot environment <zfsBE>.
>>> Source boot environment is <ufsBE>.
>>> Creating boot environment <zfsBE>.
>>> Creating file systems on boot environment <zfsBE>.
>>> Creating <zfs> file system for </> in zone <global> on
>>> <rootpool/ROOT/zfsBE>.
>>> Populating file systems on boot environment <zfsBE>.
>>> Checking selection integrity.
>>> Integrity check OK.
>>> Populating contents of mount point </>.
>>> Copying.
>>> Bus Error - core dumped
>> hmm above might be relevant I'd guess.
>>
>> What release are you on , ie is this Solaris 10, or is this Nevada build?
>>
>> Enda
>>> Creating shared file system mount points.
>>> Creating compare databases for boot environment <zfsBE>.
>>> Creating compare database for file system </var>.
>>> Creating compare database for file system </usr>.
>>> Creating compare database for file system </rootpool/ROOT>.
>>> Creating compare database for file system </>.
>>> Updating compare databases on boot environment <zfsBE>.
>>> Making boot environment <zfsBE> bootable.
>
> Anyway I did restart the whole process again, and I got again that Bus Error
>
> [07:59:01] [EMAIL PROTECTED]: /root > zpool create rootpool c1t1d0s0
> [07:59:22] [EMAIL PROTECTED]: /root > zfs set compression=on rootpool/ROOT
> cannot open 'rootpool/ROOT': dataset does not exist
> [07:59:27] [EMAIL PROTECTED]: /root > zfs set compression=on rootpool
> [07:59:31] [EMAIL PROTECTED]: /root > lucreate -c ufsBE -n zfsBE -p rootpool
> Analyzing system configuration.
> Comparing source boot environment <ufsBE> file systems with the file
> system(s) you specified for the new boot environment. Determining which
> file systems should be in the new boot environment.
> Updating boot environment description database on all BEs.
> Updating system configuration files.
> The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment;
> cannot get BE ID.
> Creating configuration for boot environment <zfsBE>.
> Source boot environment is <ufsBE>.
> Creating boot environment <zfsBE>.
> Creating file systems on boot environment <zfsBE>.
> Creating <zfs> file system for </> in zone <global> on <rootpool/ROOT/zfsBE>.
> Populating file systems on boot environment <zfsBE>.
> Checking selection integrity.
> Integrity check OK.
> Populating contents of mount point </>.
> Copying.
> Bus Error - core dumped
> Creating shared file system mount points.
> Creating compare databases for boot environment <zfsBE>.
> Creating compare database for file system </var>.
> Creating compare database for file system </usr>.
>
>
>
> _______________________________________________
> zfs-discuss mailing list
> zfs-discuss@opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
--
Enda O'Connor x19781 Software Product Engineering
Patch System Test : Ireland : x19781/353-1-8199718
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
