My meta* commands all return:
"... there are no existing databases"
This is the T3 array:
[EMAIL PROTECTED]: format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
.....
2. c1t1d0 <SUN-T300-0201 cyl 34530 alt 2 hd 128 sec 128>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],700000/SUNW,[EMAIL
PROTECTED]/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
mount:
/export2 on /dev/dsk/c1t1d0s0
read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d80008
on Mon Jul 16 17:42:52 2007
I'm a little confused as to how the volume can be mounted and not be
recognized by the meta commands.
Russ Petruzzelli wrote:
I'm brand new to zfs.
I have a system with a T3 array that I want to configure with zfs.
The T3 array had been setup with the Sun Volume manager in one big 250
Gb volume.
I want to remove this volume and setup zfs.
My problem is the system has had a new OS installed (Sol10u3) since
the volume was created.
The volume is mounted on my /export2 drive.
However smc does not see the volume. It says I am not the owner.
The md.tab file for the volume information is empty.
How do I get to the raw T3 disks so I can create the zfs system?
(I'm looking through both the Solaris Volume Manager Admin Guide and
the ZFS Admin Guide. no luck.)
Russ
------------------------------------------------------------------------
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
