On Tue, 2018-10-23 at 09:03 +0300, Kristupas Savickas wrote:
> Greetings,
> I'm trying to remove the hostapd init file as I'll handle startup
> of it on my own. I've created a .bbappend file in my layer to
> do
> this:
>
> > do_install_append() {
> >
> > rm -rf ${D}${sysconfdir}/init.d
> >
> > }
> >
> >
> >
>
> However, this results in a compilation warning when building my
> image and the ipk-postinst is still being run on my target:
>
> > WARNING: tlt-image-1.0-r0 do_rootfs: hostapd.postinst
> > returned
> > 1, marking as unpacked only, configuration required on
> > target.
> >
> > WARNING: tlt-image-1.0-r0 do_rootfs: Intentionally failing
> > postinstall scriptlets of ['hostapd'] to defer them to
> > first
> > boot is deprecated. Please place them into
> > pkg_postinst_ontarget_${PN} ().
> >
> > If deferring to first boot wasn't the intent, then
> > scriptlet
> > failure may mean an issue in the recipe, or a regression
> > elsewhere.
> >
> > Details of the failure are in
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-
> > r0/temp/log.do_rootfs.
> >
> > WARNING: tlt-image-1.0-r0 do_rootfs: [log_check] tlt-image:
> > found 1 warning message in the logfile:
> >
> > [log_check] WARNING: Intentionally failing postinstall
> > scriptlets of ['hostapd'] to defer them to first boot is
> > deprecated. Please place them into
> > pkg_postinst_ontarget_${PN}
> > ().
> >
> >
> >
> >
>
> I tried setting INITSCRIPT_NAME to "" in my .bbappend, but it
> fails with an error during do_rootfs task of my image:
>
> > cat
> > build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-
> > r0/temp/log.do_rootfs.24919
> > | grep hostapd
> >
> > NOTE: Found hostapd-dbg_2.6-r0_armv7ahf-neon.ipk in Packages,
> > but
> > mtime differs - re-reading
> >
> > Found hostapd-dev_2.6-r0_armv7ahf-neon.ipk in Packages, but
> > mtime
> > differs - re-reading
> >
> > Found hostapd_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime
> > differs - re-reading
> >
> > NOTE: Installing the following packages: android-system-core-
> > adbd
> > android-system-core-liblog android-system-core-usb ap6212
> > avlcommd
> > base-files base-passwd boot-config config-backup curl dnsmasq
> > dropbear ethtool eventslog factory-restore firewall3 fsl-rc-
> > local
> > gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils
> > iiod
> > iproute2 iptables iputils iw kernel-modules libcutils0
> > libglib-2.0-0 libnl-3-200 libstdc++6 libtlt-lua libxml2
> > lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info motion-monitor
> > mtd-utils-ubifs netifd openssl os-release packagegroup-core-
> > boot
> > perl ppp preinit procd qmuxd recgend rpcd run-postinsts
> > shadow
> > sms-utilities sqlite3 storage sysntpd system sysup tlt-base-
> > files
> > tlt-connection-manager tlt-eventslog-lua tzdata ubus uhttpd
> > update-rc.d ustream-ssl
> >
> > NOTE:
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-
> > native/usr/bin/opkg
> > --volatile-cache -f
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
> > -t
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
> > -o
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs
> > --force_postinstall --prefer-arch-to-version
> > --no-install-recommends --force-overwrite install
> > android-system-core-adbd android-system-core-liblog
> > android-system-core-usb ap6212 avlcommd base-files base-
> > passwd
> > boot-config config-backup curl dnsmasq dropbear ethtool
> > eventslog
> > factory-restore firewall3 fsl-rc-local gps-control gps-utils
> > gpsd
> > gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables
> > iputils iw
> > kernel-modules libcutils0 libglib-2.0-0 libnl-3-200
> > libstdc++6
> > libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-
> > info
> > motion-monitor mtd-utils-ubifs netifd openssl os-release
> > packagegroup-core-boot perl ppp preinit procd qmuxd recgend
> > rpcd
> > run-postinsts shadow sms-utilities sqlite3 storage sysntpd
> > system
> > sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua
> > tzdata ubus uhttpd update-rc.d ustream-ssl
> >
> > ERROR: Unable to install packages. Command
> > '/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-
> > native/usr/bin/opkg
> > --volatile-cache -f
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
> > -t
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
> > -o
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs
> > --force_postinstall --prefer-arch-to-version
> > --no-install-recommends --force-overwrite install
> > android-system-core-adbd android-system-core-liblog
> > android-system-core-usb ap6212 avlcommd base-files base-
> > passwd
> > boot-config config-backup curl dnsmasq dropbear ethtool
> > eventslog
> > factory-restore firewall3 fsl-rc-local gps-control gps-utils
> > gpsd
> > gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables
> > iputils iw
> > kernel-modules libcutils0 libglib-2.0-0 libnl-3-200
> > libstdc++6
> > libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-
> > info
> > motion-monitor mtd-utils-ubifs netifd openssl os-release
> > packagegroup-core-boot perl ppp preinit procd qmuxd recgend
> > rpcd
> > run-postinsts shadow sms-utilities sqlite3 storage sysntpd
> > system
> > sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua
> > tzdata ubus uhttpd update-rc.d ustream-ssl' returned 255:
> >
> > Installing hostapd (2.6) on root
> >
> > Downloading
> > file:/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/deploy/ipk/armv7ahf-neon/hostapd_2.6-r0_armv7ahf-neon.ipk.
> >
> > To remove package debris, try `opkg remove hostapd`.
> >
> > To re-attempt the install, try `opkg install hostapd`.
> >
> > * preinst_configure: Aborting installation of hostapd.
> >
> >
>
> Any pointers of how I could accomplish my goal?
>
>
>
>
>
>
>
We override INITSCRIPT_PARAMS in a bbappend like so:
INITSCRIPT_PARAMS = "stop 20 0 1 0 ."
Seems to work OK.
--
Joshua Watt <jpewhac...@gmail.com>
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
