> On Jun 22, 2017, at 12:22 AM, Petter Mabäcker <pet...@technux.se> wrote: > > 2017-06-19 16:40 skrev Trevor Woerner: > >> On Mon, Jun 19, 2017 at 7:22 AM, Drew Moseley <drew.mose...@mender.io >> <mailto:drew.mose...@mender.io>> wrote: >>>> On Jun 19, 2017, at 1:48 AM, Trevor Woerner <twoer...@gmail.com >>>> <mailto:twoer...@gmail.com>> wrote: >>>>> >>>>> If you have a serial console connected to +your board, you will see the >>>>> progress and a message on the console will indicate when +the flashing is >>>>> completed. >>>> hmmm, never saw this. I have a console connected, the moment the script >>>> started, on the console I got: U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) >>>> DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from >>>> which looks right, the date+time are good. >>> Did you see the proper serial output after using a smaller image? >> Yes. With a smaller image (~90MB) the flash update worked. Maybe >> another improvement for a v2 would be for the script to look at the >> size of /full/path/to/UBI_IMAGE and issue a warning/error if it's too >> big? >> >> I think the wording of what to expect on the host and over the serial >> console could use some updating. Not to mention you say: "the status >> LED on the CHIP board will flash 30 times per second..." which doesn't >> seem to be the case, it looks more like the LED is toggled every 2 >> seconds (??), in any case, it's a lot slower than 30/sec. > I also had the same experience as Trevor, that the led seems to flash every 2 > seconds. Also the code indicate that 2 x 1 sec sleep is used in this area, so > please go through the above description when it comes to led experience > during flashing. Another minor comment is that I believe you should update > the UBI_IMAGE example in README to use the "default" meta-chip hwup image > (chip-hwup-image-chip.ubi). > > BR Petter > > Petter Mabäcker > > Technux <pet...@technux.se> > www.technux.se
Indeed. The comment was intended to say that it flashes 30/min. Obviously flashing 30/sec would not be a very easy thing for people to spot. I’ll work through the comments and submit V2. It will take me a few days. Many thanks for the feedback. Drew
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
