2017-06-19 16:40 skrev Trevor Woerner:
> On Mon, Jun 19, 2017 at 7:22 AM, Drew Moseley <drew.mose...@mender.io> wrote: > >>> On Jun 19, 2017, at 1:48 AM, Trevor Woerner <twoer...@gmail.com> wrote: >>> >>>> If you have a serial console connected to +your board, you will see the progress and a message on the console will indicate when +the flashing is completed. >>> hmmm, never saw this. I have a console connected, the moment the script started, on the console I got: U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from which looks right, the date+time are good. >> Did you see the proper serial output after using a smaller image? > > Yes. With a smaller image (~90MB) the flash update worked. Maybe > another improvement for a v2 would be for the script to look at the > size of /full/path/to/UBI_IMAGE and issue a warning/error if it's too > big? > > I think the wording of what to expect on the host and over the serial > console could use some updating. Not to mention you say: "the status > LED on the CHIP board will flash 30 times per second..." which doesn't > seem to be the case, it looks more like the LED is toggled every 2 > seconds (??), in any case, it's a lot slower than 30/sec. I also had the same experience as Trevor, that the led seems to flash every 2 seconds. Also the code indicate that 2 x 1 sec sleep is used in this area, so please go through the above description when it comes to led experience during flashing. Another minor comment is that I believe you should update the UBI_IMAGE example in README to use the "default" meta-chip hwup image (chip-hwup-image-chip.ubi). BR Petter Petter Mabäcker Technux <pet...@technux.se> www.technux.se
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
