On Fri, Mar 24, 2017 at 01:49:16PM -0400, Trevor Woerner wrote: > Add support for the Waveshare 1024x600 "C" Rev2.1 7" IPS Capacitive Touch > Screen LCD with HDMI interface: > > http://www.waveshare.com/7inch-HDMI-LCD-C.htm > http://www.waveshare.com/wiki/7inch_HDMI_LCD_(C) > > This product works "out of the box" with the Raspberry Pi. Simply connect > the provided HDMI and USB cables between the two devices. The touch<=>mouse > integration works automatically. > > Tested with a Raspberry Pi 3, with a 32-bit raspberrypi3 build. > > Signed-off-by: Trevor Woerner <twoer...@gmail.com> > --- > README | 13 ++++++++++--- > recipes-bsp/bootfiles/rpi-config_git.bb | 10 ++++++++++ > 2 files changed, 20 insertions(+), 3 deletions(-) > > diff --git a/README b/README > index 65a1e5f..c58bc99 100644 > --- a/README > +++ b/README > @@ -29,7 +29,8 @@ Contents: > 3.L. Enable SPI bus > 3.M. Enable I2C > 3.N. Enable PiTFT support > - 3.O. Enable UART support > + 3.O. Misc. display > + 3.P. Enable UART support > 4. Extra apps > 4.A. omxplayer > 5. Board Configuration > @@ -241,9 +242,15 @@ List of currently supported models: > - pitft22 > - pitft28r > > -3.O. Enable UART > -=============== > +3.O. Misc. display > +================== > +If you would like to use the Waveshare "C" 1024×600, 7 inch Capacitive Touch > +Screen LCD, HDMI interface (http://www.waveshare.com/7inch-HDMI-LCD-C.htm) > +Rev 2.1, please set the following in your local.conf > +WAVESHARE_1024X600_C_2.1 = "1" > > +3.P. Enable UART > +=============== > RaspberryPi 1, 2 and CM will have UART console enabled by default. > > RaspberryPi 3 does not have the UART enabled by default because this needs a > diff --git a/recipes-bsp/bootfiles/rpi-config_git.bb > b/recipes-bsp/bootfiles/rpi-config_git.bb > index 20ec343..8adc938 100644 > --- a/recipes-bsp/bootfiles/rpi-config_git.bb > +++ b/recipes-bsp/bootfiles/rpi-config_git.bb > @@ -110,6 +110,16 @@ do_deploy() { > echo "# Enable VC4 Graphics" >> > ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > echo "dtoverlay=vc4-kms-v3d,${VC4_CMA_SIZE}" >> > ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > fi > + > + # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch > (http://www.waveshare.com/7inch-HDMI-LCD-C.htm) > + if [ "${WAVESHARE_1024X600_C_2.1}" = "1" ]; then > + echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch > screen" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + echo "max_usb_current=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + echo "hdmi_group=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + echo "hdmi_mode=87" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + echo "hdmi_cvt 1024 600 60 6 0 0 0" >> > ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + fi > } > > do_deploy_append_raspberrypi3-64() { > -- > 2.12.0.rc1.48.g076c053 > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto
Merged to master. -- Andrei Gherzan gpg: rsa4096/D4D94F67AD0E9640 | t: @agherzan
signature.asc
Description: PGP signature
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
