On 12/09/2014 12:59 PM, Maciek Borzecki wrote:
On wto, 2014-12-09 at 10:51 -0500, Bruce Ashfield wrote:
On 12/09/2014 10:44 AM, Maciej Borzecki wrote:
U-boot 2014.07 in Poky expects a zImage kernel image, thus a build done with
current machien config will not be directly useable. Update machine config to
produce a zImage.
poky's README.hardware should be updated as well. When we wrote the
instructions
(and tested on 3.14) the uImage worked, so that is what is referenced
in the instructions :)
Actually README.hardware section about BBB can be updated with info
about wic. Starting with 1.7 working SD card images for BBB can be built
out of the box, without going through manual partitiong, untarring,
etc.
I wouldn't remove the raw commands for wic-only instructions. Since there
are multiple ways to do it .. they can all be documented.
Bruce
AFAIK the same applies to x86 images, though Tom would be the best
person to comment here.
Bruce
Signed-off-by: Maciej Borzecki <maciej.borze...@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borze...@gmail.com>
---
meta-yocto-bsp/conf/machine/beaglebone.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meta-yocto-bsp/conf/machine/beaglebone.conf
b/meta-yocto-bsp/conf/machine/beaglebone.conf
index a316207..fb0189d 100644
--- a/meta-yocto-bsp/conf/machine/beaglebone.conf
+++ b/meta-yocto-bsp/conf/machine/beaglebone.conf
@@ -24,7 +24,7 @@ SERIAL_CONSOLE = "115200 ttyO0"
PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
PREFERRED_VERSION_linux-yocto ?= "3.14%"
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
