On 12/09/2014 10:44 AM, Maciej Borzecki wrote:
U-boot 2014.07 in Poky expects a zImage kernel image, thus a build done with
current machien config will not be directly useable. Update machine config to
produce a zImage.
poky's README.hardware should be updated as well. When we wrote the
instructions
(and tested on 3.14) the uImage worked, so that is what is referenced
in the instructions :)
Bruce
Signed-off-by: Maciej Borzecki <maciej.borze...@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borze...@gmail.com>
---
meta-yocto-bsp/conf/machine/beaglebone.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meta-yocto-bsp/conf/machine/beaglebone.conf
b/meta-yocto-bsp/conf/machine/beaglebone.conf
index a316207..fb0189d 100644
--- a/meta-yocto-bsp/conf/machine/beaglebone.conf
+++ b/meta-yocto-bsp/conf/machine/beaglebone.conf
@@ -24,7 +24,7 @@ SERIAL_CONSOLE = "115200 ttyO0"
PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
PREFERRED_VERSION_linux-yocto ?= "3.14%"
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
