Updates
1) I was wrong with git.xilinx.com and git.denx.de not working ... it's
just a HUGE download that took forever ... I have reverted my changes
2) I have been able to compile u-boot-xilinx (after some trial-error to
generate the proper xparameters.h with XPS/XSDK, e.g. the FLASH memory
is required)
A small fix was needed to complete u-boot-xilinx compilation ... I had
to add
#include "xparameters.h"
to the file
board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
3) I have been able to compile linux-xilinx,
but first I had to copy the file defconfig as
linux-xilinx/3.3-r02/git/.config
Now core-image-minimal is done and I am going to try it (as soon I find
how to build the ace)
All the best
AndreaS
On Fri 10 May 2013 08:45:33 PM CEST, Andrea Sterbini wrote:
Found why that error
|
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130:
line 157:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h:
Not a directory
The u-boot downloaded from github.com/Xilinx has no
board/xilinx/ml507/ directory but only a board/xilinx/ppc440-generic
Now I will try the original from git://git.denx.de/u-boot.git
(but bitbake seems to have problems fetching it)
A
On Fri 10 May 2013 07:51:11 PM CEST, Andrea Sterbini wrote:
Not yet.
I haven't been able to complete the complete run
bitbake core-image-minimal
I moved to the meta-xilinx master branch
I am able to complete almost 1600 tasks of 1666 by doing (after the
git.xilinx.com -> github.com/Xilinx fixes)
bitbake core-image-minimal -k
The error I get is
Build Configuration:
BB_VERSION = "1.19.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Fedora-18"
TARGET_SYS = "powerpc-poky-linux"
MACHINE = "virtex-5-ml507-powerpc-440"
DISTRO = "poky"
DISTRO_VERSION = "1.3+snapshot-20130510"
TUNE_FEATURES = "m32 ppc440 fpu-soft"
TARGET_FPU = "soft"
meta
meta-yocto
meta-yocto-bsp = "master:88a7b041fbf2583472aa9408a33dd8881223a0c1"
toolchain-layer = "master:cc0067dc0c7ea469057238db6422864d1bce311c"
toolchain-layer = "master:cd5f284730a6430d563443786c409aa6783d4b04"
meta-xilinx = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff"
meta-angstrom = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18"
--- a lot of diagnostic messages later
ERROR: Function failed: do_configure (see
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130
for further information)
ERROR: Logfile of failure stored in:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| NOTE: Replacing xparameters header to match hardware model
|
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130:
line 157:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h:
Not a directory
| ERROR: Function failed: do_configure (see
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130
for further information)
ERROR: Task 79
(/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb,
do_configure) failed with exit code '1'
ERROR: Function failed: do_compile (see
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129
for further information)
ERROR: Logfile of failure stored in:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc
LD=powerpc-poky-linux-ld.bfd
| scripts/kconfig/conf --silentoldconfig Kconfig
| ***
| *** Configuration file ".config" not found!
| ***
| *** Please run some configurator (e.g. "make oldconfig" or
| *** "make menuconfig" or "make xconfig").
| ***
| make[2]: *** [silentoldconfig] Error 1
| make[1]: *** [silentoldconfig] Error 2
| make: *** No rule to make target `include/config/auto.conf', needed
by `include/config/kernel.release'. Stop.
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129
for further information)
ERROR: Task 811
(/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb,
do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need
to be rerun and 2 failed.
Waiting for 0 running tasks to finish:
Summary: 2 tasks failed:
/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb,
do_configure
/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb,
do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit
code.
All the best
Andrea
On Fri 10 May 2013 05:11:48 PM CEST, Elvis Dowson wrote:
Hi Andrea,
On May 10, 2013, at 6:02 PM, Andrea Sterbini <a.sterb...@tiscali.it>
wrote:
The problems I have found (and someway fixed) are:
1) when I do "bitbake meta-toolchain" I get an error complaining
that the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU
I never did get soft-float to work properly with gcc-4.6 or gcc-4.7.
I got soft-float to work with gcc-4.5.4.
hard float fpu support worked with gcc-4.7.
Were you able to boot and login to the command prompt with the
generated images ?
Best regards,
Elvis Dowson
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
