25 feb 2013 kl. 15:58 skrev Satya Swaroop DAMARLA <swar...@weisser.at>:
> Guys. I found the solution to this problem.... > > I think if you already install uboot-tools or uboot-mkimage packes from > Ubuntu repository then it is used instead of the one that is downloaded and > we should uninstall the packages and then rerun the build,,... Then IT > WORKS... So, thank you for the time and enegry... I assume this thread is > closed and this is the solution and if this doesnot work for some then please > post it and we may discuss the situation depending on the problem, > > Greetings & Regards, > Satya > Same comment here as for the device tree compiler. You should use the uboot tools/version as they come with the package. Not the one used by the host distro. To me this is not a proper solution. > > On Thu, Feb 21, 2013 at 5:28 PM, Rudolf Streif <rstr...@linuxfoundation.org> > wrote: >> Satya, >> >> I will look into it later today. I am currently at the Linux Foundation's >> Embedded Linux Conference. >> >> Rudi >> >> >> On Thu, Feb 21, 2013 at 2:10 AM, Satya Swaroop DAMARLA <swar...@weisser.at> >> wrote: >>> Hello Guys, >>> >>> I have not received any reply from you. If you can help me to figure out >>> what the errors mean when adding a new .bb or recipe file then I can learn >>> the mistake and take care in the new recipes.... I request your time >>> >>> >>> On Wed, Feb 20, 2013 at 7:19 PM, Satya Swaroop Damarla >>> <swaroop.dama...@gmail.com> wrote: >>>> hey Guys... I get the following error... which I attached.. Its completely >>>> greek and latin to me.. Can you please help me.. >>>> >>>> >>>> On Wed, Feb 20, 2013 at 7:19 PM, Satya Swaroop DAMARLA >>>> <swar...@weisser.at> wrote: >>>>> hey Guys... I get the following error... which I attached.. Its >>>>> completely greek and latin to me.. Can you please help me.. >>>>> >>>>> >>>>> On Wed, Feb 20, 2013 at 6:46 PM, Hans Beckérus <hans.becke...@gmail.com> >>>>> wrote: >>>>>> On Wed, Feb 20, 2013 at 6:12 PM, Satya Swaroop Damarla >>>>>> <swaroop.dama...@gmail.com> wrote: >>>>>> > Hey hans, this is what he meant, >>>>>> > >>>>>> > In the machine config file add the following >>>>>> > >>>>>> > PREFERRED_VERSION_u-boot ?= "v2013.01%" or PREFERRED_VERSION_u-boot ?= >>>>>> > "v2013.01.01%" >>>>>> > >>>>>> > By the way did you already complete the first part... There is also >>>>>> > other >>>>>> > file called "u-boot-fw-utils_2012.04.01.bb" ... I think we should do >>>>>> > the >>>>>> > same... >>>>>> > >>>>>> > Hans bytheway, are you also working on the same board or diffferent >>>>>> > board >>>>>> > with same problem? >>>>>> > >>>>>> >>>>>> Different board, same core, similar problem ;) >>>>>> Now I get it. Thanks. But still question remains how in earth I >>>>>> managed to build the kernel if not also having copied/renamed the >>>>>> mkimage .bb? >>>>>> Is the PREFERRED_VERSION_u-boot used to determine what mkimage and fw >>>>>> utils it picks up? >>>>>> Then it might be that since I/we build u-boot as a separate package, >>>>>> but kernel lifts in the mkimage stuff, it works but the wrong package >>>>>> was used. >>>>>> In my case obviously compatible, but not recommended I guess. Also, I >>>>>> agree that the fw utils should probably be in sync similar to mkimage. >>>>>> >>>>>> Hans >>>>>> >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > On Wed, Feb 20, 2013 at 6:01 PM, Hans Beckérus >>>>>> > <hans.becke...@gmail.com> >>>>>> > wrote: >>>>>> >> >>>>>> >> On Wed, Feb 20, 2013 at 5:16 PM, Rudolf Streif >>>>>> >> <rstr...@linuxfoundation.org> wrote: >>>>>> >> > Satya, >>>>>> >> > >>>>>> >> > Simply look at the u-boot recipes in meta/recipes-bsp/u-boot such as >>>>>> >> > u-boot_2012.04.01.bb. You can simply copy it and name it >>>>>> >> > u-boot_2013.01.bb >>>>>> >> > and then modify SRCREV to the revision that corresponds to the tag >>>>>> >> > 2013.01 >>>>>> >> > or 2013.01.01 in git.denx.de: >>>>>> >> > >>>>>> >> > for 2013.01: 3a9d879f6f64585b819af728b53be0a05037fe0d >>>>>> >> > for 2013.01.01: e8ae0fa5edd152b2b29c470b88429be4cdcd2c46 >>>>>> >> > >>>>>> >> > Do the same for u-boot-mkimage and include the u-boot version with >>>>>> >> > your >>>>>> >> > bsp. >>>>>> >> > >>>>>> >> > Rudi >>>>>> >> > >>>>>> >> > >>>>>> >> Hi Rudi, sorry to chime in , but I have a similar problem but do not >>>>>> >> really get the last thing you said. >>>>>> >> What do you mean by including the u-boot version in the bsp? Also is >>>>>> >> it a must to also copy the mkimage .bb or will the system find a >>>>>> >> suitable one automatically? >>>>>> >> The thing is that I only copied/edited the u-boot .bb but never the >>>>>> >> mkimage. Still my kernel successfully builds the kernel uImage!? >>>>>> >> Some magic that I have missed :) >>>>>> >> >>>>>> >> Hans >>>>>> >> >>>>>> >> >>>>>> >> > On Wed, Feb 20, 2013 at 5:17 AM, Satya Swaroop Damarla >>>>>> >> > <swaroop.dama...@gmail.com> wrote: >>>>>> >> >> >>>>>> >> >> Hi Guys, >>>>>> >> >> >>>>>> >> >> I need support for uboot on Tamonten board but the version on it is >>>>>> >> >> v2012.04 but I came to know that v2012.10 or v2013.01 supports the >>>>>> >> >> Tamontenboard through some guys here.. >>>>>> >> >> >>>>>> >> >> It would be great if you can tell me how can I accomplish v2013.01 >>>>>> >> >> or >>>>>> >> >> v2012.10 into the build system and make it available so that I can >>>>>> >> >> compile >>>>>> >> >> the and get uImage >>>>>> >> >> >>>>>> >> >> (Tamonten board is a derivative of harmony board with some changes >>>>>> >> >> and >>>>>> >> >> has >>>>>> >> >> arm cortexa9 processor without neon extentions ) >>>>>> >> >> >>>>>> >> >> I am kind of new to add new .bb files and help is really >>>>>> >> >> appreciated as >>>>>> >> >> I >>>>>> >> >> am not able to figure out how to add >>>>>> >> >> >>>>>> >> >> Greetings & Regards, >>>>>> >> >> Swaroop >>>>>> >> >> >>>>>> >> >> _______________________________________________ >>>>>> >> >> yocto mailing list >>>>>> >> >> yocto@yoctoproject.org >>>>>> >> >> https://lists.yoctoproject.org/listinfo/yocto >>>>>> >> >> >>>>>> >> > >>>>>> >> > >>>>>> >> > >>>>>> >> > -- >>>>>> >> > -- >>>>>> >> > Rudolf J. Streif >>>>>> >> > Director of Embedded Solutions >>>>>> >> > The Linux Foundation >>>>>> >> > >>>>>> >> > rudolf.str...@linux.com >>>>>> >> > Phone: +1.619.631.5383 >>>>>> >> > Skype: rudolfstreif >>>>>> >> > PGP: RSA 2048/2048 D6E7D28B >>>>>> >> > >>>>>> >> > Linux Foundation Events Schedule: events.linuxfoundation.org >>>>>> >> > Linux Foundation Training Schedule: training.linuxfoundation.org >>>>>> >> > >>>>>> >> > >>>>>> >> > _______________________________________________ >>>>>> >> > yocto mailing list >>>>>> >> > yocto@yoctoproject.org >>>>>> >> > https://lists.yoctoproject.org/listinfo/yocto >>>>>> >> > >>>>>> > >>>>>> > >> >> >> >> -- >> -- >> Rudolf J. Streif >> Director of Embedded Solutions >> The Linux Foundation >> >> rudolf.str...@linux.com >> Phone: +1.619.631.5383 >> Skype: rudolfstreif >> PGP: RSA 2048/2048 D6E7D28B >> >> Linux Foundation Events Schedule: events.linuxfoundation.org >> Linux Foundation Training Schedule: training.linuxfoundation.org >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
