25 feb 2013 kl. 16:56 skrev Satya Swaroop Damarla <swaroop.dama...@gmail.com>:

> Another important package that has to be installed in  the "apt-get install 
> device-tree-compiler" package. This was adviced by the Thierry Reding, wh 
> wrote the uboot config for Tamonten board.. Rudolf, may I ask you how did you 
> find the SRCREV values for the uboot packages ... It would be great to know 
> as there is not sufficient literature avilable to explain this on the 
> internet...
> 
I do not get this. Why should you want to install this package? The dts 
compiler should be part of any complete kernel! I think it is the wrong 
solution to use the one from the host distro. You should use the one the 
specific kernel version provides.

> 
> On Mon, Feb 25, 2013 at 3:58 PM, Satya Swaroop DAMARLA <swar...@weisser.at> 
> wrote:
>> Guys. I found the solution to this problem....
>> 
>> I think if you already install uboot-tools or uboot-mkimage packes from 
>> Ubuntu repository then it is used instead of the one that is downloaded and 
>> we should uninstall the packages and then rerun the build,,... Then IT 
>> WORKS... So, thank you for the time and enegry... I assume this thread is 
>> closed and this is the solution and if this doesnot work for some then 
>> please post it and we may discuss the situation depending on the problem,
>> 
>> Greetings & Regards,
>> Satya
>> 
>> 
>> On Thu, Feb 21, 2013 at 5:28 PM, Rudolf Streif <rstr...@linuxfoundation.org> 
>> wrote:
>>> Satya,
>>> 
>>> I will look into it later today. I am currently at the Linux Foundation's 
>>> Embedded Linux Conference.
>>> 
>>> Rudi
>>> 
>>> 
>>> On Thu, Feb 21, 2013 at 2:10 AM, Satya Swaroop DAMARLA <swar...@weisser.at> 
>>> wrote:
>>>> Hello Guys,
>>>> 
>>>> I have not received any reply from you. If you can help me to figure out 
>>>> what the errors mean when adding a new .bb or recipe file then I can learn 
>>>> the mistake and take care in the new recipes.... I request your time 
>>>> 
>>>> 
>>>> On Wed, Feb 20, 2013 at 7:19 PM, Satya Swaroop Damarla 
>>>> <swaroop.dama...@gmail.com> wrote:
>>>>> hey Guys... I get the following error... which I attached.. Its 
>>>>> completely greek and latin to me.. Can you please help me..
>>>>> 
>>>>> 
>>>>> On Wed, Feb 20, 2013 at 7:19 PM, Satya Swaroop DAMARLA 
>>>>> <swar...@weisser.at> wrote:
>>>>>> hey Guys... I get the following error... which I attached.. Its 
>>>>>> completely greek and latin to me.. Can you please help me..
>>>>>> 
>>>>>> 
>>>>>> On Wed, Feb 20, 2013 at 6:46 PM, Hans Beckérus <hans.becke...@gmail.com> 
>>>>>> wrote:
>>>>>>> On Wed, Feb 20, 2013 at 6:12 PM, Satya Swaroop Damarla
>>>>>>> <swaroop.dama...@gmail.com> wrote:
>>>>>>> > Hey hans, this is what he meant,
>>>>>>> >
>>>>>>> > In the machine config file add the following
>>>>>>> >
>>>>>>> > PREFERRED_VERSION_u-boot ?= "v2013.01%"  or PREFERRED_VERSION_u-boot 
>>>>>>> > ?=
>>>>>>> > "v2013.01.01%"
>>>>>>> >
>>>>>>> > By the way did you already complete the first part... There is also 
>>>>>>> > other
>>>>>>> > file called "u-boot-fw-utils_2012.04.01.bb" ... I think we should do 
>>>>>>> > the
>>>>>>> > same...
>>>>>>> >
>>>>>>> > Hans bytheway,  are you also working on the same board or diffferent 
>>>>>>> > board
>>>>>>> > with same problem?
>>>>>>> >
>>>>>>> 
>>>>>>> Different board, same core, similar problem ;)
>>>>>>> Now I get it. Thanks. But still question remains how in earth I
>>>>>>> managed to build the kernel if not also having copied/renamed the
>>>>>>> mkimage .bb?
>>>>>>> Is the PREFERRED_VERSION_u-boot used to determine what mkimage and fw
>>>>>>> utils it picks up?
>>>>>>> Then it might be that since I/we build u-boot as a separate package,
>>>>>>> but kernel lifts in the mkimage stuff, it works but the wrong package
>>>>>>> was used.
>>>>>>> In my case obviously compatible, but not recommended I guess. Also, I
>>>>>>> agree that the fw utils should probably be in sync similar to mkimage.
>>>>>>> 
>>>>>>> Hans
>>>>>>> 
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> > On Wed, Feb 20, 2013 at 6:01 PM, Hans Beckérus 
>>>>>>> > <hans.becke...@gmail.com>
>>>>>>> > wrote:
>>>>>>> >>
>>>>>>> >> On Wed, Feb 20, 2013 at 5:16 PM, Rudolf Streif
>>>>>>> >> <rstr...@linuxfoundation.org> wrote:
>>>>>>> >> > Satya,
>>>>>>> >> >
>>>>>>> >> > Simply look at the u-boot recipes in meta/recipes-bsp/u-boot such 
>>>>>>> >> > as
>>>>>>> >> > u-boot_2012.04.01.bb. You can simply copy it and name it
>>>>>>> >> > u-boot_2013.01.bb
>>>>>>> >> > and then modify SRCREV to the revision that corresponds to the tag
>>>>>>> >> > 2013.01
>>>>>>> >> > or 2013.01.01 in git.denx.de:
>>>>>>> >> >
>>>>>>> >> > for 2013.01: 3a9d879f6f64585b819af728b53be0a05037fe0d
>>>>>>> >> > for 2013.01.01: e8ae0fa5edd152b2b29c470b88429be4cdcd2c46
>>>>>>> >> >
>>>>>>> >> > Do the same for u-boot-mkimage and include the u-boot version with 
>>>>>>> >> > your
>>>>>>> >> > bsp.
>>>>>>> >> >
>>>>>>> >> > Rudi
>>>>>>> >> >
>>>>>>> >> >
>>>>>>> >> Hi Rudi, sorry to chime in , but I have a similar problem but do not
>>>>>>> >> really get the last thing you said.
>>>>>>> >> What do you mean by including the u-boot version in the bsp? Also is
>>>>>>> >> it a must to also copy the mkimage .bb or will the system find a
>>>>>>> >> suitable one automatically?
>>>>>>> >> The thing is that I only copied/edited the u-boot .bb but never the
>>>>>>> >> mkimage. Still my kernel successfully builds the kernel uImage!?
>>>>>>> >> Some magic that I have missed :)
>>>>>>> >>
>>>>>>> >> Hans
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> > On Wed, Feb 20, 2013 at 5:17 AM, Satya Swaroop Damarla
>>>>>>> >> > <swaroop.dama...@gmail.com> wrote:
>>>>>>> >> >>
>>>>>>> >> >> Hi Guys,
>>>>>>> >> >>
>>>>>>> >> >> I need support for uboot on Tamonten board but the version on it 
>>>>>>> >> >> is
>>>>>>> >> >> v2012.04 but I came to know that v2012.10 or v2013.01 supports the
>>>>>>> >> >> Tamontenboard through some guys here..
>>>>>>> >> >>
>>>>>>> >> >> It would be great if you can tell me how can I accomplish 
>>>>>>> >> >> v2013.01 or
>>>>>>> >> >> v2012.10 into the build system and make it available so that I can
>>>>>>> >> >> compile
>>>>>>> >> >> the and get uImage
>>>>>>> >> >>
>>>>>>> >> >> (Tamonten board is a derivative of harmony board with some 
>>>>>>> >> >> changes and
>>>>>>> >> >> has
>>>>>>> >> >> arm cortexa9 processor without neon extentions )
>>>>>>> >> >>
>>>>>>> >> >> I am kind of new to add new .bb files and help is really 
>>>>>>> >> >> appreciated as
>>>>>>> >> >> I
>>>>>>> >> >> am not able to figure out how to add
>>>>>>> >> >>
>>>>>>> >> >> Greetings & Regards,
>>>>>>> >> >> Swaroop
>>>>>>> >> >>
>>>>>>> >> >> _______________________________________________
>>>>>>> >> >> yocto mailing list
>>>>>>> >> >> yocto@yoctoproject.org
>>>>>>> >> >> https://lists.yoctoproject.org/listinfo/yocto
>>>>>>> >> >>
>>>>>>> >> >
>>>>>>> >> >
>>>>>>> >> >
>>>>>>> >> > --
>>>>>>> >> > --
>>>>>>> >> > Rudolf J. Streif
>>>>>>> >> > Director of Embedded Solutions
>>>>>>> >> > The Linux Foundation
>>>>>>> >> >
>>>>>>> >> > rudolf.str...@linux.com
>>>>>>> >> > Phone: +1.619.631.5383
>>>>>>> >> > Skype: rudolfstreif
>>>>>>> >> > PGP: RSA 2048/2048 D6E7D28B
>>>>>>> >> >
>>>>>>> >> > Linux Foundation Events Schedule:  events.linuxfoundation.org
>>>>>>> >> > Linux Foundation Training Schedule: training.linuxfoundation.org
>>>>>>> >> >
>>>>>>> >> >
>>>>>>> >> > _______________________________________________
>>>>>>> >> > yocto mailing list
>>>>>>> >> > yocto@yoctoproject.org
>>>>>>> >> > https://lists.yoctoproject.org/listinfo/yocto
>>>>>>> >> >
>>>>>>> >
>>>>>>> >
>>> 
>>> 
>>> 
>>> -- 
>>> -- 
>>> Rudolf J. Streif
>>> Director of Embedded Solutions
>>> The Linux Foundation
>>> 
>>> rudolf.str...@linux.com
>>> Phone: +1.619.631.5383
>>> Skype: rudolfstreif
>>> PGP: RSA 2048/2048 D6E7D28B
>>> 
>>> Linux Foundation Events Schedule:  events.linuxfoundation.org
>>> Linux Foundation Training Schedule: training.linuxfoundation.org
>>> 
>>> 
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
> 
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to