Hello! > I personally have used Philip's meta-zynq layer to build a working u-boot and > linux kernel image using Yocto. It works really well.
I have also tried to build a kernel and root filesystem for Zynq but the kernel gets stuck when booting, regardless if on the ZC702 board or on Qemu. I tried Poky denzil and Poky danny. Also the alternate meta-zynq layer from git.yoctoproject.org shows the same behaviour. These are the last console messages which I get: ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-3.2.11-yocto-standard Created: 2012-12-04 20:07:37 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2997472 Bytes = 2.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01a80000 Booting using the fdt blob at 0x1a80000 Loading Device Tree to 0eff8000, end 0efff185 ... OK Loading Kernel Image ... OK OK Loading Device Tree to 0efed000, end 0eff7185 ... OK Starting kernel ... Instead of using Linux kernel version 3.5-xilinx I always get Linux-3.2.11-yocto-standard which is obviously missing the Zynq patches. meta-zynq/recipes-kernel-linux-zynq contains the following lines: LINUX_VERSION ?= "3.5" LINUX_VERSION_EXTENSION ?= "-xilinx" How can I force Yocto to build kernel 3.5-xilinx? With best regards, Andreas Schweigstill -- Dipl.-Phys. Andreas Schweigstill Schweigstill IT | Embedded Systems Schauenburgerstraße 116, D-24118 Kiel, Germany Phone: (+49) 431 530354-35, Fax: (+49) 431 530354-36 Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/ _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
