2011/9/15 Zhang, Jessica <jessica.zh...@intel.com>:
> Hi Eric,
>
> The eclipse 1.0 works with Yocto 1.0 release.  For the latest Yocto mainline, 
> we'd advise you to update to eclipse Indigo, 1.1_M3.final is updated for 
> Indigo.  We're working on the document including how to configure Indigo at 
> the moment for the upcoming Yocto Oct. release.  Below is the section talks 
> about how to configure your Indigo to work with Yocto plug-in.  After doing 
> this, you can just use the yocto eclipse of master.  Hope this will get you 
> going.
>
> Thanks,
> Jessica
>
> 1.      Start the Eclipse IDE.
> 2.      Select "Install New Software" from the "Help" pull-down menu.
> 3.      Select Indego - http://download.eclipse.org/releases/indego from the 
> "Work with:" pull-down menu.
> 4.      Expand the box next to Programming Languages and select the Autotools 
> Support for CDT (incubation) and C/C++ Development Tools boxes.
> 5.      Complete the installation and restart the Eclipse IDE.
> 6.      Select "Install New Software" from the "Help" pull-down menu.
> 7.      After the Eclipse IDE restarts, click the "Available Software Sites" 
> link.
> 8.      Check the box next to http://download.eclipse.org/tm/updates/3.3 and 
> click "OK".
> 9.      Select http://download.eclipse.org/tm/updates/3.3 from the "Work 
> with:" pull-down menu.
> 10.     Check the box next to TM and RSE Main Features.
> 11.     Expand the box next to TM and RSE Optional Add-ons and select every 
> item except RSE Unit Tests and RSE WinCE Services (incubation).
> 12.     Complete the installation and restart the Eclipse IDE.
> 13.     After the Eclipse IDE restarts, click the "Available Software Sites" 
> link.
> 14.     Check the box next to 
> http://download.eclipse.org/tools/cdt/releases/indego and click "OK".
> 15.     Select http://download.eclipse.org/tools/cdt/releases/indego from the 
> "Work with:" pull-down menu.
> 16.     Check the box next to CDT Main Features.
> 17.     Expand the box next to CDT Optional Features and select C/C++ Remote 
> Launch and Target Communication Framework (incubation).
> 18.     Complete the installation and restart the Eclipse IDE.
>
>

Hi Jessica,

Thanks for the instructions, they work.

Best regards,
  Enric

>
> -----Original Message-----
> From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] 
> On Behalf Of Enric Balletbò i Serra
> Sent: Thursday, September 15, 2011 1:35 AM
> To: Lu, Lianhao
> Cc: yocto@yoctoproject.org
> Subject: Re: [yocto] Error Creating Project with Eclipse IDE
>
> 2011/9/6 Enric Balletbò i Serra <eballe...@gmail.com>:
>> 2011/9/6 Lu, Lianhao <lianhao...@intel.com>:
>>> Enric Balletbò i Serra wrote on 2011-09-06:
>>>> Hi Lianhao,
>>>>
>>>> 2011/9/6 Lu, Lianhao <lianhao...@intel.com>:
>>>>> Hi Enric,
>>>>>
>>>>> Which version of the Yocto eclipse plug-in did you use?
>>>>
>>>> I'm using version 1.0 from
>>>> http://www.yoctoproject.org/downloads/eclipse-plugin/1.0 with latest
>>>> yocto mainline from git.
>>>
>>> I believe the latest changes in Yocto mainline is not compatible with the 
>>> 1.0 plugin due to some file/variable name changes in the Yocto mainline.
>>
>> Ah ok, that could explain my problem, thanks
>>>
>>> -Lianhao
>>>
>>>>
>>>>> Have you configure the plug-in as mentioned in manual section 4.1.3?
>>>>
>>>> Yes, I followed these steps I will review the steps to see if I'm
>>>> missing something ...
>>>>
>>>> Cheers,
>>>>   Enric
>>>>>
>>>>> Best Regards,
>>>>> -Lianhao
>>>>>
>>>>> Enric Balletbò i Serra wrote on 2011-09-06:
>>>>>> Hi all,
>>>>>>
>>>>>> Following
>>>>>> http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.htm
>>>>>> (chapter 4.2), when I’m creating a New Project I’m getting the message:
>>>>>>
>>>>>>   Error Creating Project
>>>>>>   Project cannot be created
>>>>>>   Reason: Internal Error: java.lang.NullPointerException I'm
>>>>>> running Eclipse Helios (Version: Helios Service Release 2, Build
>>>>>> id: 20110301-1815) on Ubuntu 10.10 machine.
>>>>>>
>>>>>> Any clue with this ?
>>>>>>
>>>>>> Thanks in advance,
>>>>>>    Enric
>>>>>
>>>
>>>
>>>
>>
>
> I see the same error using 1.1_M3.final tag from git repositories, is
> this problem solved anywhere ? Maybe in master ?
>
> Thanks,
>  Enric
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to