On 08/17/2011 09:51 AM, tom.zanu...@intel.com wrote:
From: Tom Zanussi<tom.zanu...@intel.com>
With the new emgd-driver-bin recipe, the extensive instructions on how
to manually download and set up EMGD for the build are no longer
necessary. Those instructions have been replaced with the simpler set
of instructions now needed to build crownbay with EMGD.
Changes to reflect the new image names and a couple other minor
cleanups are also included.
Signed-off-by: Tom Zanussi<tom.zanu...@intel.com>
---
meta-crownbay/README | 207 ++++++++++----------------------------------------
1 files changed, 42 insertions(+), 165 deletions(-)
diff --git a/meta-crownbay/README b/meta-crownbay/README
index 89056ed..c82f2c4 100644
--- a/meta-crownbay/README
+++ b/meta-crownbay/README
@@ -6,7 +6,7 @@ The Crown Bay platform consists of the Intel Atom Z6xx
processor,
plus the Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff).
It also supports the E6xx embedded on-chip graphics via the Intel
-Embedded Media and Graphics Driver (EMGD) 1.6 Gold Driver.
+Embedded Media and Graphics Driver (EMGD) 1.8 Driver.
Table of Contents
=================
@@ -33,14 +33,20 @@ bblayers.conf e.g.:
The meta-crownbay layer contains support for two different machine
configurations. These configurations are identical except for the fact
that the one prefixed with 'crownbay' makes use of the
-Intel-proprietary EMGD 1.6 graphics driver, while the one prefixed
+Intel-proprietary EMGD 1.8 graphics driver, while the one prefixed
with 'crownbay-noemgd' does not.
-If you want to enable the layer that supports EMGD graphics add
+If you want to enable the layer that supports EMGD graphics add the
following to the local.conf file:
MACHINE ?= "crownbay"
+You also need to add the line:
+
+ COMMERCIAL_LICENSE = ""
+
Tom,
I thought we talked about using the oe_filter mechanism here instead of
a flat override, since this will bring in other COMMERCIAL_LICENSED content.
Sau!
+to the local.conf file.
+
If you want to enable the layer that does not support EMGD graphics
add the following to the local.conf file:
@@ -48,8 +54,8 @@ add the following to the local.conf file:
You should then be able to build a crownbay image as such:
- $ source poky-init-build-env
- $ bitbake poky-image-sato-live
+ $ source oe-init-build-env
+ $ bitbake core-image-sato
At the end of a successful build, you should have a live image that
you can boot from a USB flash drive (see instructions on how to do
@@ -59,10 +65,11 @@ As an alternative to downloading the BSP tarball, you can
also work
directly from the meta-intel git repository. For each BSP in the
'meta-intel' repository, there are multiple branches, one
corresponding to each major release starting with 'laverne' (0.90), in
-addition to the latest code which tracks the current master. Instead
-of extracting a BSP tarball at the top level of your yocto build tree,
-you can equivalently check out the appropriate branch from the
-meta-intel repository at the same location.
+addition to the latest code which tracks the current master (note that
+not all BSPs are present in every release). Instead of extracting
+a BSP tarball at the top level of your yocto build tree, you can
+equivalently check out the appropriate branch from the meta-intel
+repository at the same location.
II. Special notes for building the meta-crownbay BSP layer
@@ -70,182 +77,52 @@ II. Special notes for building the meta-crownbay BSP layer
The meta-crownbay layer makes use of the proprietary Intel EMGD
userspace drivers when building the "crownbay" machine (but not when
-building the "crownbay-noemgd" machine). If you got the BSP from the
-'BSP Downloads' section of the Yocto website, the EMGD binaries needed
-to perform the build will already be present in the BSP, located in
-the recipes-graphics/xorg-xserver/emgd-driver-bin-1.6 directory, and
-you can ignore the rest of this section.
+building the "crownbay-noemgd" machine).
-If you didn't get the BSP from the 'BSP Downloads' section of the
-Yocto website, you have two choices:
+As mentioned in Section I, you need to add the line:
-- You can download a tarball containing an rpm that contains the
- binaries and extract the binaries from that, and copy them to the
- proper location in the meta-crownbay layer.
+ COMMERCIAL_LICENSE = ""
-- You can download a Windows executable from the official EMGD
- website, extract the binaries from it, and copy them to the proper
- location in the meta-crownbay layer.
+to the local.conf file in order for the build to succeed.
-The following subsections describe each option in detail.
+The crownbay BSP COMMERCIAL_LICENSE default setting causes the build
+to fail in order to prevent users from inadvertently creating and
+possibly distributing images containing packages with non-free
+licenses. Clearing the COMMERCIAL_LICENSE variable as shown above
+essentially tells the build system that you're OK with the fact that
+packages with non-free licenses such as EMGD will be installed in the
+image.
+Once you've done a build, you can examine the EMGD license(s) in the
+IEMGD_HEAD_Linux/License directory of the emgd-driver-bin work
+directory of the build.
-IIa Downloading and extracting the binaries using the EMGD Linux tarball
-------------------------------------------------------------------------
+Alternatively, you can examine the licenses before building by
+downloading the EMGD 1.8 Driver and looking at the licenses in the
+downloaded tarball.
-The first step of the process is to download the EMGD 1.6 Gold Driver.
-Here is the current link to the URL which it can be downloaded from:
+Here is the current link to the URL from which it can be downloaded:
http://edc.intel.com/Software/Downloads/EMGD/
In the Download Now tab, select:
Intel® architecture-based product: Linux Tar Ball
-Operating System: MeeGo 1.0 IVI Linux (kernel 2.6.33.3, X.server 1.8.0)
+Operating System: MeeGo* 1.2 IVI Linux* (kernel 2.6.37, X.server 1.9, Mesa 7.9)
-That will give you a large tar file:
+That will give you a large .tgz file:
-Lin_EMGD_1_6_RC_1922.tar
+Lin_EMGD_1_8_RC_2032.tgz
Extract the files in the tar file, which will in turn give you a
directory named IEMGD_HEAD_Linux.
-The binaries are contained in an rpm file; you can extract the
-binaries from the rpm file using rpm2cpio and cpio:
-
-$ cd IEMGD_HEAD_Linux/MeeGo1.2
-$ rpm2cpio emgd-bin-1922-1.6.i586.rpm> emgd-bin-1922-1.6.i586.cpio
-$ mkdir extracted; cd extracted
-$ cpio -idv< ../poky-image-minimal-initramfs-emenlow.cpio
-
-Finally, you can copy the xorg-xserver binaries to the
-emgd-driver-bin-1.6 directory in the meta-crownbay layer:
-
-$ cp -a usr/lib meta-crownbay/recipes-graphics/xorg-xserver/emgd-driver-bin-1.6
-
-You also need to copy the IEMGD License.txt file to the same directory:
-
-$ cp IEMGD_HEAD_Linux/License/License.txt
meta-crownbay/recipes/xorg-xserver/emgd-driver-bin-1.6
-
-At this point, you should be able to build meta-crownbay images as usual.
-
-
-IIb Extracting the binaries using the graphical ced application
----------------------------------------------------------------
-
-These steps require that you run a graphical application in Windows.
-Windows 7 was used for these instructions, but it shouldn't matter
-which version of Windows you use.
-
-The first step of the process is to download the EMGD 1.6 Gold Driver.
-Here is the current link to the URL which it can be downloaded from:
-
-http://edc.intel.com/Software/Downloads/EMGD/
-
-In the Download Now tab, select:
-
-Intel® architecture-based product: Intel Atom Processor E6XX Series
-Operating System: MeeGo 1.0 IVI Linux (kernel 2.6.33.3, X.server 1.8.0)
-
-That will give you a large zip file:
-
-IEMGD_1_6_GOLD_1922.zip
-
-Extract the files in the zip file, which will in turn give you a large
-.exe file:
-
-IEMGD_1_6_GOLD_ALL_1922.exe
-
-Run IEMGD_1_6_GOLD_ALL_1922.exe to install, accept licenses, etc.
-
-If it says to install watcom, follow the instructions to do that.
-
-When the installation completes, an application named "emgd-ced" will
-be present in the install directory. Double-click to run it.
-
-Select the menu item: New Configuration
-
-In the tabbed page, make the following selections and/or enter the
-specified data:
-
-Configuration File Name: myconfig
-Platform Chipset: Intel Atom Processor E6xx
-Port Devices: LVDS, sDVO
-
-Hit the 'Next' button.
+The applicable Licenses are contained in the License directory under
+IEMGD_HEAD_Linux.
-On the next tabbed page, make the following selections and/or enter
-the specified data:
-Readable Port Name: portname0
-Encoder Configuration: Select sDVO Device: Internal LVDS
-
-Hit the 'Finish' button.
-
-Select the menu item: New Package
-
-In the tabbed page, make the following selections and/or enter the
-specified data:
-
-Package File Name: mypackage
-Configurations: selec myconfig.cnfg
-Target OS: Linux operating System
-
-Hit the 'Finish' button.
-
-Select the menu item: Generate Installation
-
-This will create the EMGD installation package:
-
-Generating EMGD installation...
-
-The installation package should now be under the 'workspace'
-subdirectory of the directory you installed to:
-
-workspace/installation/mypackage.pkg_installation/IEMGD_HEAD_Linux/IEMGD_HEAD_Linux.tgz
-
-This is the file you are interested in. Copy it to your Poky build
-system, and uncompress/untar it:
-
-$ tar cvfz IEMGD_HEAD_Linux.tgz
-
-The binaries are contained in an rpm file; you can extract the
-binaries from the rpm file using rpm2cpio and cpio:
-
-$ cd IEMGD_HEAD_Linux/MeeGo1.2
-$ rpm2cpio emgd-bin-1922-1.6.i586.rpm> emgd-bin-1922-1.6.i586.cpio
-$ mkdir extracted; cd extracted
-$ cpio -idv< ../poky-image-minimal-initramfs-emenlow.cpio
-
-Finally, you can copy the xorg-xserver binaries to the
-emgd-driver-bin-1.6 directory in the meta-crownbay layer:
-
-$ cp -a usr/lib meta-crownbay/recipes-graphics/xorg-xserver/emgd-driver-bin-1.6
-
-You also need to copy the IEMGD License.txt file to the same directory:
-
-$ cp IEMGD_HEAD_Linux/License/License.txt
meta-crownbay/recipes/xorg-xserver/emgd-driver-bin-1.6
-
-At this point, you should be able to build meta-crownbay images as usual.
-
-----
-
-For reference, the EMGD Driver documentation is also available at the
-above link.
-
-The specific text of the document is:
-
-User Guide: Intel® Embedded Media and Graphics Driver, EFI Video
-Driver, EPOG, and Video BIOS v1.6 for Windows* XP and Linux* Provides
-installation requirements/procedures& describes the vbios/firmware,
-configuration options,& functionality of Intel® EMGD under Windows*&
-Linux*. Refer to guide for details.
-
-April 2011
-
-
-II. Booting the images in /binary
-=================================
+III. Booting the images in /binary
+==================================
This BSP contains bootable live images, which can be used to directly
boot Yocto off of a USB flash drive.
@@ -254,7 +131,7 @@ Under Linux, insert a USB flash drive. Assuming the USB
flash drive
takes device /dev/sdf, use dd to copy the live image to it. For
example:
-# dd if=poky-image-sato-live-crownbay-20101207053738.hddimg of=/dev/sdf
+# dd if=core-image-sato-crownbay-20101207053738.hddimg of=/dev/sdf
# sync
# eject /dev/sdf
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
