Le lun. 18 nov. 2024 à 09:27, Uy Ha via lists.yoctoproject.org <hchanuy= gmail....@lists.yoctoproject.org> a écrit :
> I think this only works if I can interact with the storage (e.g an SD > card) from my workstation, is that correct? Because my iMX6 has the eMMC > storage builtin, hence it is not removable and I cannot access it from my > workstation. > Depending on your hardware, maybe you can use USB OTG and USB Mass-Storage (command "ums" from u-boot) to write your eMMC from your workstation with bmaptool. Or you can boot your system not using eMMC (external USB, network TFTP/NFS, ...) and then use bmaptool on your target to flash the eMMC. So, "yes" to your 3rd question : you can automate this. Regards, -- Yoann Congal Smile ECS - Tech expert
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#64287): https://lists.yoctoproject.org/g/yocto/message/64287 Mute This Topic: https://lists.yoctoproject.org/mt/109628914/21656 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
