I have an old 1U server with VGA output. The graphics card is an ATI Mach64. The monitor connected to the VGA is a Dell 2001FP, which is 1600x1200 native, but should be operated at a lower resolution on this server because of limited VGA bandwidth.
I recently upgraded the Linux distro to openSUSE Leap 15.0, and now no matter what I try, I get "Screen(s) found, but none have a usable configuration." no matter what I try. I would appreciate any suggestions that would help me get this working. My first attempt with the distro files in /etc/X11/xorg.conf.d, which are essentially empty, letting Xorg default everything. I have since attempted adding Monitor, Section, and Device sections to give me 1024x768@60Hz, but nothing gets rid of the none usable error. I am relatively naive when it comes to Xorg configuration, and so I could easily be missing something obvious. I would therefore appreciate someone looking over the following log output and suggest what the problem might be. Since this a 1U server that will usually be booted headless, I would like a configuration that will work with whatever monitor happens to be on the "crash cart" in the colocation facility. That's why my target is 1024x768@60Hz, since that is pretty much universal. But right now I cannot get it to work with the monitor on my bench, no matter what I try. For example, I have tried putting the ModeLines from the log file into my 50-monitor.conf file, to no avail. I have also tried the vesa driver instead of the mach64 driver, also to no avail. Always no usable screens. Suggestions or pointers much appreciated! [ 60041.843] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 60041.843] X Protocol Version 11, Revision 0 [ 60041.843] Build Operating System: openSUSE SUSE LINUX [ 60041.843] Current Operating System: Linux spruce-eth1 4.12.14-lp150.12.45-default #1 SMP Mon Jan 14 20:29:59 UTC 2019 (7a62739) x86_64 [ 60041.843] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.14-lp150.12.45-default root=UUID=b8f3f2a9-4364-48e5-9a25-8d4053919a70 video=1024x768 resume=/dev/disk/by-id/ata-ST3500630NS_9QG43S41-part3 splash=silent quiet showopts [ 60041.844] Build Date: 14 November 2018 12:00:00PM [ 60041.844] [ 60041.844] Current version of pixman: 0.34.0 [ 60041.844] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 60041.844] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 60041.845] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 3 08:45:38 2019 [ 60041.845] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 60041.846] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 60041.846] (==) ServerLayout "Default Layout" [ 60041.846] (**) |-->Screen "Default Screen" (0) [ 60041.846] (**) | |-->Monitor "Default Monitor" [ 60041.847] (**) | |-->Device "Mach64" [ 60041.847] (==) Automatically adding devices [ 60041.847] (==) Automatically enabling devices [ 60041.847] (==) Automatically adding GPU devices [ 60041.847] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 60041.847] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 60041.847] Entry deleted from font path. [ 60041.847] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 60041.847] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 60041.847] (**) Extension "XFree86-DGA" is disabled [ 60041.847] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 60041.847] (II) Loader magic: 0x56415caa9d00 [ 60041.847] (II) Module ABI versions: [ 60041.847] X.Org ANSI C Emulation: 0.4 [ 60041.847] X.Org Video Driver: 23.0 [ 60041.847] X.Org XInput driver : 24.1 [ 60041.847] X.Org Server Extension : 10.0 [ 60041.849] (--) using VT number 2 [ 60041.849] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 60041.852] (--) PCI:*(0:1:7:0) 1002:4752:1002:8008 rev 39, Mem @ 0xde000000/16777216, 0xdd100000/4096, I/O @ 0x00002000/256, BIOS @ 0x????????/131072 [ 60041.852] (II) LoadModule: "glx" [ 60041.853] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 60041.854] (II) Module glx: vendor="X.Org Foundation" [ 60041.854] compiled for 1.19.6, module version = 1.0.0 [ 60041.854] ABI class: X.Org Server Extension, version 10.0 [ 60041.854] (II) LoadModule: "mach64" [ 60041.855] (II) Loading /usr/lib64/xorg/modules/drivers/mach64_drv.so [ 60041.855] (II) Module mach64: vendor="X.Org Foundation" [ 60041.855] compiled for 1.19.6, module version = 6.9.5 [ 60041.855] Module class: X.Org Video Driver [ 60041.855] ABI class: X.Org Video Driver, version 23.0 [ 60041.855] (II) MACH64: Driver for ATI Mach64 chipsets [ 60041.944] (**) MACH64(0): Depth 24, (**) framebuffer bpp 32 [ 60041.944] (==) MACH64(0): Using XAA acceleration architecture [ 60041.944] (II) MACH64: Mach64 in slot 1:7:0 detected. [ 60041.944] (II) Loading sub module "vbe" [ 60041.944] (II) LoadModule: "vbe" [ 60041.944] (II) Loading /usr/lib64/xorg/modules/libvbe.so [ 60041.944] (II) Module vbe: vendor="X.Org Foundation" [ 60041.944] compiled for 1.19.6, module version = 1.1.0 [ 60041.944] ABI class: X.Org Video Driver, version 23.0 [ 60041.945] (II) Loading sub module "int10" [ 60041.945] (II) LoadModule: "int10" [ 60041.945] (II) Loading /usr/lib64/xorg/modules/libint10.so [ 60041.945] (II) Module int10: vendor="X.Org Foundation" [ 60041.945] compiled for 1.19.6, module version = 1.0.0 [ 60041.945] ABI class: X.Org Video Driver, version 23.0 [ 60041.945] (II) MACH64(0): initializing int10 [ 60041.946] (II) MACH64(0): Primary V_BIOS segment is: 0xc000 [ 60041.946] (II) MACH64(0): VESA BIOS detected [ 60041.946] (II) MACH64(0): VESA VBE Version 2.0 [ 60041.946] (II) MACH64(0): VESA VBE Total Mem: 8128 kB [ 60041.946] (II) MACH64(0): VESA VBE OEM: ATI MACH64 [ 60041.946] (II) MACH64(0): VESA VBE OEM Software Rev: 1.0 [ 60041.946] (II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc. [ 60041.946] (II) MACH64(0): VESA VBE OEM Product: MACH64GM [ 60041.946] (II) MACH64(0): VESA VBE OEM Product Rev: 01.00 [ 60041.946] (II) MACH64(0): VESA VBE DDC supported [ 60041.946] (II) MACH64(0): VESA VBE DDC Level 2 [ 60041.946] (II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec. [ 60041.970] (II) MACH64(0): VESA VBE DDC read successfully [ 60041.971] (II) UnloadSubModule: "vbe" [ 60041.971] (II) Unloading vbe [ 60041.971] (II) MACH64(0): Manufacturer: DEL Model: a007 Serial#: 808668236 [ 60041.971] (II) MACH64(0): Year: 2004 Week: 42 [ 60041.971] (II) MACH64(0): EDID Version: 1.3 [ 60041.971] (II) MACH64(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 60041.971] (II) MACH64(0): Sync: Separate Composite SyncOnGreen [ 60041.971] (II) MACH64(0): Max Image Size [cm]: horiz.: 41 vert.: 31 [ 60041.971] (II) MACH64(0): Gamma: 2.20 [ 60041.971] (II) MACH64(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 60041.971] (II) MACH64(0): Default color space is primary color space [ 60041.971] (II) MACH64(0): First detailed timing is preferred mode [ 60041.971] (II) MACH64(0): redX: 0.638 redY: 0.342 greenX: 0.293 greenY: 0.608 [ 60041.971] (II) MACH64(0): blueX: 0.146 blueY: 0.067 whiteX: 0.312 whiteY: 0.328 [ 60041.971] (II) MACH64(0): Supported established timings: [ 60041.971] (II) MACH64(0): 720x400@70Hz [ 60041.971] (II) MACH64(0): 640x480@60Hz [ 60041.971] (II) MACH64(0): 640x480@75Hz [ 60041.971] (II) MACH64(0): 800x600@60Hz [ 60041.971] (II) MACH64(0): 800x600@75Hz [ 60041.971] (II) MACH64(0): 1024x768@60Hz [ 60041.971] (II) MACH64(0): 1024x768@75Hz [ 60041.971] (II) MACH64(0): 1280x1024@75Hz [ 60041.971] (II) MACH64(0): Manufacturer's mask: 0 [ 60041.971] (II) MACH64(0): Supported standard timings: [ 60041.971] (II) MACH64(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 60041.971] (II) MACH64(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 60041.971] (II) MACH64(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 60041.971] (II) MACH64(0): Supported detailed timing: [ 60041.971] (II) MACH64(0): clock: 162.0 MHz Image Size: 367 x 275 mm [ 60041.971] (II) MACH64(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 [ 60041.971] (II) MACH64(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 [ 60041.971] (II) MACH64(0): Serial No: C06464AC03LL [ 60041.971] (II) MACH64(0): Monitor name: DELL 2001FP [ 60041.971] (II) MACH64(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 165 MHz [ 60041.971] (II) MACH64(0): EDID (in hex): [ 60041.971] (II) MACH64(0): 00ffffffffffff0010ac07a04c4c3330 [ 60041.971] (II) MACH64(0): 2a0e01030e291f78ee6390a3574b9b25 [ 60041.971] (II) MACH64(0): 115054a54b008180a940714f01010101 [ 60041.971] (II) MACH64(0): 010101010101483f403062b0324040c0 [ 60041.971] (II) MACH64(0): 13006f131100001e000000ff00433036 [ 60041.972] (II) MACH64(0): 343634414330334c4c20000000fc0044 [ 60041.972] (II) MACH64(0): 454c4c203230303146500a20000000fd [ 60041.972] (II) MACH64(0): 00384c1f5010000a20202020202000b1 [ 60041.972] (II) MACH64(0): EDID vendor "DEL", prod id 40967 [ 60041.972] (II) MACH64(0): Using hsync ranges from config file [ 60041.972] (II) MACH64(0): Using vrefresh ranges from config file [ 60041.972] (II) MACH64(0): Printing DDC gathered Modelines: [ 60041.972] (II) MACH64(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 60041.972] (II) MACH64(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 60041.972] (II) MACH64(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 60041.972] (II) MACH64(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 60041.972] (II) MACH64(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 60041.972] (II) MACH64(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 60041.972] (II) MACH64(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 60041.972] (II) MACH64(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 60041.972] (II) MACH64(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 60041.972] (II) MACH64(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 60041.972] (II) MACH64(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 60041.972] (II) MACH64(0): BIOS Data: BIOSSize=0x8000, ROMTable=0x0114. [ 60041.972] (II) MACH64(0): BIOS Data: ClockTable=0x097C, FrequencyTable=0x0000. [ 60041.972] (II) MACH64(0): BIOS Data: LCDTable=0x0000. [ 60041.972] (II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x015E. [ 60041.972] (II) MACH64(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F. [ 60041.972] (--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected. [ 60041.972] (--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision 0x00. [ 60041.972] (--) MACH64(0): PCI bus interface detected; block I/O base is 0x2000. [ 60041.972] (--) MACH64(0): ATI Mach64 adapter detected. [ 60041.972] (!!) MACH64(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. [ 60041.972] (--) MACH64(0): Internal RAMDAC (subtype 1) detected. [ 60041.972] (==) MACH64(0): RGB weight 888 [ 60041.972] (==) MACH64(0): Default visual is TrueColor [ 60041.972] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0) [ 60041.972] (II) MACH64(0): Using Mach64 accelerator CRTC. [ 60041.972] (II) MACH64(0): Storing hardware cursor image at 0xDE7FFC00. [ 60041.972] (II) MACH64(0): Using 8 MB linear aperture at 0xDE000000. [ 60041.972] (!!) MACH64(0): Virtual resolutions will be limited to 8191 kB due to linear aperture size and/or placement of hardware cursor image area. [ 60041.972] (II) MACH64(0): Using Block 0 MMIO aperture at 0xDD100400. [ 60041.972] (II) MACH64(0): Using Block 1 MMIO aperture at 0xDD100000. [ 60041.973] (EE) MACH64(0): Unable to map linear aperture. Invalid argument (22) [ 60041.973] (II) UnloadModule: "mach64" [ 60041.973] (II) UnloadSubModule: "int10" [ 60041.973] (II) Unloading int10 [ 60041.973] (EE) Screen(s) found, but none have a usable configuration. [ 60041.973] (EE) Fatal server error: [ 60041.973] (EE) no screens found(EE) [ 60041.974] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 60041.974] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
_______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: https://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s
