Backup your config files and try this below.
config files:
/etc/X11/xorg.conf or XF86Config
Move all xorg.conf* and all XF86Config* to a
backup folder.
After this, put my config in /etc/X11 and
try startx.
If ok then change by hand modify the config
and get inside of loop change/try making
yours fine tunes.
Pay atention in
# Section Keyboard, Mouse and Video Board
Good tries.
#BOF /etc/X11/XF86Config
Section "Module"
Load "ddc" # probing of monitor
Load "GLcore" #
Load "dbe" # Double buffer extension
# Load "dri" # 3D support, avoid to use with nv
Load "extmod"
Load "glx"
#
Load "bitmap" # bitmap fonts
Load "speedo"
Load "type1" # Type1 and
Load "freetype" # FreeType
Load "record"
Load "xtt"
Load "xtrap"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
FontPath "/usr/share/fonts/"
# FontPath "/usr/X11R6/lib/X11/fonts/CID/"
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
# The module search path. The default path is shown here.
#ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
# ignore mouse absence
Option "AllowMouseOpenFail" "true"
#Option "NoTrapSignals"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
#Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
#Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
#Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
#Option "AllowNonLocalModInDev"
Option "RandR" "on"
EndSection
# Section keyboard
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
# br-abnt2
#Option "XkbModel" "pc106"
#Option "XkbLayout" "br"
# br-abnt2 morinoto
#Option "XkbModel" "abnt2"
#Option "XkbLayout" "abnt2"
# us-acents
Option "XkbModel" "pc105"
Option "XkbLayout" "us_intl"
EndSection
# Section Mouse
Section "InputDevice"
Identifier "Mouse1"
#Identifier "Mouse2"
Driver "mouse"
Option "Device" "/dev/mouse" # /dev/psaux /dev/input/mice
/dev/ttyS0
Option "SendCoreEvents" "true"
# mouse ps2 scroll
#
Option "Protocol" "IMPS/2"
Option "Buttons" "5"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Resolution" "256"
# mouse ps2 scroll usb
#
#Option "Protocol" "IMPS/2"
#Option "Buttons" "5"
#Option "ZAxisMapping" "4 5"
# mouse ps2
#
#Option "Protocol" "PS/2"
#Option "Emulate3Buttons" "true"
#Option "Emulate3Timeout" "70"
# mouse serial
#
#Option "Protocol" "Microsoft"
#Option "Emulate3Buttons" "true"
#Option "Emulate3Timeout" "70"
EndSection
# mouse usb notebook
#
#Section "InputDevice"
#
# Identifier "Mouse2"
# Driver "mouse"
# Option "Device" "/dev/input/mice"
# Option "SendCoreEvents" "true"
#
# # mouse ps2 com scroll usb
# #
# Option "Protocol" "IMPS/2"
# Option "Buttons" "5"
# Option "ZAxisMapping" "4 5"
#
#EndSection
Section "Monitor"
Identifier "Monitor1"
#
#-------------| 640x480 | 800x600 | 1024x768 | 1154x864 | 1280x1024
# HorizSync | 25 - 38 | 33 - 48 | 35 - 59 | 45 - 67 | 50 - 75
# VertRefresh | 50 - 75 | 50 - 75 | 50 - 75 | 50 - 75 | 50 - 75
#
#
#
# 765MB
#
#HorizSync 30 - 85
#VertRefresh 50 - 160
#
#
# LG700S
#
#HorizSync 30 - 71
#VertRefresh 50 - 160
#
# Compaq B540
#
#HorizSync 30 - 71
#VertRefresh 50 - 160
#
# Philips
#
HorizSync 35 - 59
VertRefresh 50 - 75
Option "dpms"
EndSection
#
# Section Video Board
#
Section "Device"
Identifier "PV_1"
#Option "sw_cursor"
#
# VGA Standard
# Driver "vga"
#
# VESA Standard
Driver "vesa"
#
# Trident Generic
# Driver "trident"
#
# Trident 3D Image
# Driver "3dimage975"
#
# Trident CyberBlade
# Driver "CyberBlade"
#
# S3 Inc. 86c775/86c785 [Trio 64V2/DX or /GX] (rev 16)
# Driver "s3"
#
# S3 86C368
# Driver "s3virge"
#
# nVidia GeForce
# Driver "nv"
#
# SiS 6326
# Driver "sis"
#
# Creative Labs Permedia 2
# Driver "glint"
#
# Via VT8237
# Driver "via"
EndSection
#
# Section Video Board End
#
Section "Screen"
Identifier "PV_1_Modos"
Device "PV_1"
Monitor "Monitor1"
DefaultDepth 16 # 8, 16, 24, 32
Subsection "Display"
Depth 16 # 8, 16, 24, 32
#Modes "2048x1536" "1920x1440" "1856x1392" "1792x1344" "1600x1200"
# "1400x1050" "1280x0960" "1280x1024" "1152x0864" "1152x0768"
# "1024x0768" "0800x0600" "0640x0480" "0576x0432" "0512x0384"
# "0416x0312" "0400x0300" "0320x0240" "0360x0200" "0320x0175"
# 765MB
#Modes "1600x1200" "1400x1050" "1280x960" "1280x1024" "1152x864"
"1152x768" \
# "1024x768" "800x600" "640x480"
# LG700S
# full
#Modes "1400x1050" "1280x960" "1280x1024" "1152x864" "1152x768"
"1024x768" \
# "800x600" "640x480" "320x240"
# most used
#Modes "1400x1050" "800x600"
#Modes "1280x1024" "800x600"
#Modes "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1024x768" "800x600" "640x480"
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
Screen "PV_1_Modos"
InputDevice "Mouse1" "CorePointer"
#InputDevice "Mouse2" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
# EOF /etc/X11/XF86Config
_______________________________________________________
Novidade no Yahoo! Mail: receba alertas de novas mensagens no seu celular.
Registre seu aparelho agora!
http://br.mobile.yahoo.com/mailalertas/
_______________________________________________
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
