Hi. On Tue, Jul 22, 2003 at 02:56:53PM -0400, Joel wrote: > > Section "Monitor" > Identifier "Sys 1510P" > VendorName "Sys" > ModelName "1510P" > HorizSync 30-60 > VertRefresh 70-90
as I can see your monitor needs a horizontal sync frequency between 30 and 60 kHz; and a vertical refresh between 70 and 90 Hz. If this is not correct you can try to "release" the requirements, and, for example, set up a HorizSync 30-70 and VertRefresh 55-90. *** NOTE: this can DESTROY your display!!!!!! *** if something strange happens kill immediately X with the zap keys.(ctrl-alt-BS) Another thing you can try, is changing the modelines; you can also tune uf them after, using xvidtune (also here you can destroy your display) > hostname: Unknown host > xauth: (argv):1: bad display name "death:0" in "list" command > xauth: (argv):1: bad display name "death:0" in "add" command > I have ho idea about this errors > X: warning; process set to priority -11 instead of requested priority -10 I think this is Debian related; also I have the same thing, but it doesn't affect the working of X > (--) S3: Mode "640x480" needs vert refresh rate of 60.00 Hz. Deleted. > (--) S3: Mode "800x600" needs vert refresh rate of 56.25 Hz. Deleted. > (--) S3: Mode "800x600" needs vert refresh rate of 60.32 Hz. Deleted. > (--) S3: Mode "1024x768" needs vert refresh rate of 60.00 Hz. Deleted. > (--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted. > (--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted. > explained above > XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" > after 0 requests (0 known processed) with 0 events remaining. > xauth: (argv):1: bad display name "death:0" in "remove" command still strange. hoping that will help you. -- Nobody said computers were going to be polite. Bye by Vlad/Nick _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
