* Aleksandar Simonovski ([EMAIL PROTECTED]) wrote:
> > That's my config:
> > http://deimos.one.pl/ftp/conf/XF86Config_xfree86-4.3.0
> can you please send the XF86Config file by mail because i can get it from the
> link (connection timeout)
On the server:
[EMAIL PROTECTED]:~$ uptime
9:40am up 20 days, 9:07, 2 users, load average: 0.00, 0.00, 0.00
[EMAIL PROTECTED]:~$
--
# Damian *dEiMoS* Kołkowski # http://deimos.one.pl/ #
Section "DRI"
Mode 0666
EndSection
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi_pl"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi_pl"
FontPath "/usr/X11R6/lib/X11/fonts/misc_pl"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "type1"
Load "speedo"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "pl"
# Option "XkbOptions" "grp:switch"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "imps/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
Option "Buttons" "3"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "IQT"
ModelName "Q790"
Option "DPMS"
ModeLine "1024x768/100Hz" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync
-VSync
# ModeLine "800x600/100Hz" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# ModeLine "1280x1024/76Hz" 135 1280 1312 1416 1664 1024 1027 1030 1064
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" "no"
#Option "HWCursor" "no"
#Option "SWcursor" "yes"
#Option "DontZap" "yes"
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" "yes"
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" "yes"
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "CloneDisplay" # <i>
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon R250 If [Radeon 9000]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768/100Hz"
# Modes "800x600/100Hz"
# Modes "1280x1024/76Hz"
# Modes "1024x768"
ViewPort 0 0
# Virtual "1600 1200"
Virtual 0 0
EndSubsection
EndSection
