* Dennis Bar ([EMAIL PROTECTED]) wrote: > I've create config with X -configure, but it doesn't work. > The config and error log are applied
It works 4 me with DRM 1.8.0 from: http://cpbotha.net/files/dri_resume/radeon-cpbotha-20030302-linux.DRI.i386.tar.bz2 That's my config: http://deimos.one.pl/ftp/conf/XF86Config_xfree86-4.3.0 P.S. You have rv250I{d,e,f,g} .~. # lspci | grep ATI 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) 01:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01) .~. # dmesg | grep drm [drm] Initialized radeon 1.8.0 20020828 on minor 0 .~. # dmesg | grep radeon radeonfb: ref_clk=2700, ref_div=12, xclk=20000 from BIOS radeonfb: MTRR enabled radeonfb: ATI Radeon 9000 If DDR SGRAM 64 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected [drm] Initialized radeon 1.8.0 20020828 on minor 0 .~. # -- # Damian *dEiMoS* Kołkowski # http://deimos.one.pl/ # _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
