Yet you'll need to provide the kernel messages
I attached a console log "xen-console-log.txt". Here, Xen crash even without the "dom0_mem=1G,max:1G" option : ``` # cat /boot/efi/EFI/xen/xen.cfg [global] default=xen [xen] options=loglvl=all com1=115200,8n1 console=com1,vgakernel=vmlinuz root=/dev/md2 ro rootdelay=10 noquiet nosplash earlyprintk=xen console=com1
ramdisk=initrd.img ``` Do you need something else helpful ? Regards, Guillaume
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff] [ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff] [ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff] [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 491049 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff] [ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x89ec1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff] [ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed90fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed91000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xserve-AD) [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88083ec00000 s105304 r8192 d29864 u262144 [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8169272 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/md2 ro rootdelay=10 noquiet nosplash earlyprintk=xen console=com1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x83ac00000-0x83ec00000] (64MB) mapped at [ffff88083ac00000-ffff88083ebfffff] [ 0.000000] Memory: 31864768K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 1331096K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:33024 nr_irqs:2048 0 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3800.000 MHz processor [ 90.970239] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.33 BogoMIPS (lpj=15168664) [ 90.970242] pid_max: default: 32768 minimum: 301 [ 90.970252] ACPI: Core revision 20160831 [ 91.004565] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 91.004748] Security Framework initialized [ 91.004750] Yama: disabled by default; enable with sysctl kernel.yama.* [ 91.004753] AppArmor: AppArmor disabled by boot time parameter [ 91.007519] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 91.011906] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 91.013468] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 91.013510] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 91.013739] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 91.013740] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 91.013742] CPU: Physical Processor ID: 0 [ 91.013743] CPU: Processor Core ID: 0 [ 91.013746] mce: CPU supports 2 MCE banks [ 91.013756] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 91.013757] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 91.013959] Freeing SMP alternatives memory: 24K [ 91.041017] ftrace: allocating 25212 entries in 99 pages [ 91.047209] cpu 0 spinlock event irq 121 [ 91.047212] smpboot: Max logical packages: 1 [ 91.047214] VPMU disabled by hypervisor. [ 91.047224] Performance Events: Skylake events, PMU not available due to virtualization, using software events only. [ 91.047635] NMI watchdog: disabled (cpu0): hardware events not enabled [ 91.047636] NMI watchdog: Shutting down hard lockup detector on all cpus [ 91.047702] installing Xen timer for CPU 1 [ 91.047898] cpu 1 spinlock event irq 133 [ 91.047960] installing Xen timer for CPU 2 [ 91.048154] cpu 2 spinlock event irq 140 [ 91.048215] installing Xen timer for CPU 3 [ 91.048414] cpu 3 spinlock event irq 147 [ 91.048474] installing Xen timer for CPU 4 [ 91.048603] cpu 4 spinlock event irq 154 [ 91.048662] installing Xen timer for CPU 5 [ 91.048782] cpu 5 spinlock event irq 161 [ 91.048892] installing Xen timer for CPU 6 [ 91.048999] cpu 6 spinlock event irq 168 [ 91.049058] installing Xen timer for CPU 7 [ 91.049159] cpu 7 spinlock event irq 175 [ 91.049165] x86: Booted up 1 node, 8 CPUs [ 91.049734] devtmpfs: initialized [ 91.049768] x86/mm: Memory block size: 128MB [ 91.053122] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes) [ 91.053124] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes) [ 91.053174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 91.053188] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 91.053241] pinctrl core: initialized pinctrl subsystem [ 91.053316] NET: Registered protocol family 16 [ 91.053321] xen:grant_table: Grant tables using version 1 layout [ 91.053327] Grant table initialized [ 91.053659] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 91.053660] ACPI: bus type PCI registered [ 91.053662] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 91.053785] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 91.053787] PCI: not using MMCONFIG [ 91.053788] PCI: Using configuration type 1 for base access [ 91.063838] ACPI: Added _OSI(Module Device) [ 91.063841] ACPI: Added _OSI(Processor Device) [ 91.063842] ACPI: Added _OSI(3.0 _SCP Extensions) [ 91.063843] ACPI: Added _OSI(Processor Aggregator Device) [ 91.065277] ACPI: Executed 21 blocks of module-level executable AML code [ 91.073772] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 91.076249] ACPI: Dynamic OEM Table Load: [ 91.077145] ACPI: Dynamic OEM Table Load: [ 91.077206] ACPI: SSDT 0xFFFF880836C80000 000750 (v02 PmRef Cpu0Ist 00003000 INTL 20141107) [ 91.077366] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 91.078995] ACPI: Dynamic OEM Table Load: [ 91.079000] ACPI: SSDT 0xFFFF8808371F5C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107) [ 91.079717] ACPI: Dynamic OEM Table Load: [ 91.079723] ACPI: SSDT 0xFFFF880836CD4000 0005AA (v02 PmRef ApIst 00003000 INTL 20141107) [ 91.080073] ACPI: Dynamic OEM Table Load: [ 91.080077] ACPI: SSDT 0xFFFF8808371D3600 000119 (v02 PmRef ApCst 00003000 INTL 20141107) [ 91.084357] ACPI: Interpreter enabled [ 91.084385] ACPI: (supports S0 S5) [ 91.084386] ACPI: Using IOAPIC for interrupt routing [ 91.084416] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 91.086897] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 91.104283] HEST: Table parsing has been initialized. [ 91.104286] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 91.104658] ACPI: Power Resource [PG00] (on) [ 91.104916] ACPI: Power Resource [PG01] (on) [ 91.105172] ACPI: Power Resource [PG02] (on) [ 91.112218] ACPI: Power Resource [WRST] (off) [ 91.112523] ACPI: Power Resource [WRST] (off) [ 91.112824] ACPI: Power Resource [WRST] (off) [ 91.113131] ACPI: Power Resource [WRST] (off) [ 91.113436] ACPI: Power Resource [WRST] (off) [ 91.113735] ACPI: Power Resource [WRST] (off) [ 91.114036] ACPI: Power Resource [WRST] (off) [ 91.114337] ACPI: Power Resource [WRST] (off) [ 91.114636] ACPI: Power Resource [WRST] (off) [ 91.114938] ACPI: Power Resource [WRST] (off) [ 91.115258] ACPI: Power Resource [WRST] (off) [ 91.115580] ACPI: Power Resource [WRST] (off) [ 91.115879] ACPI: Power Resource [WRST] (off) [ 91.116180] ACPI: Power Resource [WRST] (off) [ 91.116487] ACPI: Power Resource [WRST] (off) [ 91.116787] ACPI: Power Resource [WRST] (off) [ 91.117098] ACPI: Power Resource [WRST] (off) [ 91.117404] ACPI: Power Resource [WRST] (off) [ 91.117702] ACPI: Power Resource [WRST] (off) [ 91.118002] ACPI: Power Resource [WRST] (off) [ 91.120083] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 91.123092] ACPI: Power Resource [FN00] (off) [ 91.123161] ACPI: Power Resource [FN01] (off) [ 91.123226] ACPI: Power Resource [FN02] (off) [ 91.123291] ACPI: Power Resource [FN03] (off) [ 91.123356] ACPI: Power Resource [FN04] (off) [ 91.124240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 91.124245] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 91.127149] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 91.127150] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 91.129007] PCI host bridge to bus 0000:00 [ 91.129009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 91.129010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 91.129011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 91.129013] pci_bus 0000:00: root bus resource [mem 0x9e000000-0xdfffffff window] [ 91.129014] pci_bus 0000:00: root bus resource [mem 0x880000000-0x8bfffffff window] [ 91.129015] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 91.129017] pci_bus 0000:00: root bus resource [bus 00-fe] (XEN) PCI add device 0000:00:00.0 [ 91.130792] pci 0000:00:14.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:14.0 (XEN) PCI add device 0000:00:14.2 (XEN) PCI add device 0000:00:16.0 (XEN) PCI add device 0000:00:16.1 (XEN) PCI add device 0000:00:17.0 [ 91.134370] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 91.135039] pci 0000:00:1d.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1d.0 [ 91.135188] pci 0000:00:1d.2: Intel SPT PCH root port ACS workaround enabled [ 91.135852] pci 0000:00:1d.2: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1d.2 [ 91.135996] pci 0000:00:1d.3: Intel SPT PCH root port ACS workaround enabled [ 91.136664] pci 0000:00:1d.3: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1d.3 (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.2 (XEN) PCI add device 0000:00:1f.4 [ 91.139477] pci 0000:01:00.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:01:00.0 [ 91.149090] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 91.149549] pci 0000:02:00.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:02:00.0 [ 91.161253] pci 0000:00:1d.2: PCI bridge to [bus 02] [ 91.161727] pci 0000:03:00.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:03:00.0 [ 91.168766] random: fast init done [ 91.173413] pci 0000:00:1d.3: PCI bridge to [bus 03] [ 91.174883] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.174936] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 91.174986] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.175040] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.175099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.175150] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.175201] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.175251] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 91.176060] ACPI: Enabled 6 GPEs in block 00 to 7F [ 91.176188] xen:balloon: Initialising balloon driver [ 91.179742] xen_balloon: Initialising balloon driver [ 91.179893] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 91.179896] vgaarb: loaded [ 91.179897] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 91.179898] vgaarb: bridge control possible 0000:01:00.0 [ 91.179926] Registered efivars operations [ 91.196370] PCI: Using ACPI for IRQ routing (XEN) PCI: Using MCFG for segment 0000 bus 00-ff [ 91.224904] clocksource: Switched to clocksource xen [ 91.228955] VFS: Disk quotas dquot_6.6.0 [ 91.228977] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 91.228990] hugetlbfs: disabling because there are no supported hugepage sizes [ 91.229008] pnp: PnP ACPI init [ 91.229102] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 91.229103] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 91.229105] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 91.229106] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 91.229108] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 91.229109] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 91.229110] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 91.229373] system 00:01: [io 0x2000-0x20fe] has been reserved [ 91.229476] system 00:02: [io 0x0680-0x069f] has been reserved [ 91.229478] system 00:02: [io 0xffff] has been reserved [ 91.229479] system 00:02: [io 0xffff] has been reserved [ 91.229480] system 00:02: [io 0xffff] has been reserved [ 91.229481] system 00:02: [io 0x1800-0x18fe] has been reserved [ 91.229483] system 00:02: [io 0x164e-0x164f] has been reserved [ 91.229545] system 00:03: [io 0x0800-0x087f] has been reserved [ 91.229613] system 00:05: [io 0x1854-0x1857] has been reserved [ 91.229923] Already setup the GSI :4 [ 91.231007] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 91.231009] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 91.231010] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved [ 91.231450] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 91.231451] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 91.231453] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 91.231455] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved [ 91.231456] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 91.231457] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 91.231459] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 91.231460] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 91.231461] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved [ 91.231463] system 00:08: [mem 0x9e000000-0x9e01ffff] has been reserved [ 91.232210] pnp: PnP ACPI: found 9 devices [ 91.236830] PM-Timer failed consistency check (0xffffff) - aborting. [ 91.236834] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 91.236862] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref] [ 91.236863] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 91.236868] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff] [ 91.236872] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref] [ 91.236878] pci 0000:00:1d.2: PCI bridge to [bus 02] [ 91.236880] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff] [ 91.236885] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff] [ 91.236894] pci 0000:00:1d.3: PCI bridge to [bus 03] [ 91.236896] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff] [ 91.236902] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff] [ 91.237125] NET: Registered protocol family 2 [ 91.237410] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 91.237654] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 91.237724] TCP: Hash tables configured (established 262144 bind 65536) [ 91.237769] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 91.237847] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 91.237920] NET: Registered protocol family 1 [ 91.238487] Unpacking initramfs... [ 91.452450] Freeing initrd memory: 19932K [ 91.452888] audit: initializing netlink subsys (disabled) [ 91.452912] audit: type=2000 audit(1516728740.528:1): initialized [ 91.453209] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 91.453394] zbud: loaded [ 91.454050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 91.454078] io scheduler noop registered [ 91.454079] io scheduler deadline rhrough PCIe PME interrupt [ 91.454839] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 91.454850] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt [ 91.454851] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 91.454863] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt [ 91.454864] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 91.454871] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 91.454875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 91.454883] efifb: probing for efifb [ 91.455041] efifb: framebuffer at 0x9f000000, using 1876k, total 1875k [ 91.455042] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 91.455043] efifb: scrolling: redraw [ 91.455044] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 91.469386] Console: switching to colour frame buffer device 100x37 [ 91.482519] fb0: EFI VGA frame buffer device [ 91.483936] ERST: Error Record Serialization Table (ERST) support is initialized. [e: Registered erGHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 91.484490] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 91.484780] hpet_acpi_add: no address or irqs in _CRS [ 91.484800] Linux agpgart interface v0.103 [ 91.484842] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de> [ 91.484843] AMD IOMMUv2 functionality not available on this system [ 91.485192] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 92.464910] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d52e002987, max_idle_ns: 881591041647 ns [ 92.571799] i8042: No controller found [ 92.571903] mousedev: PS/2 mouse device common for all mice [ 92.571928] rtc_cmos 00:04: RTC can wake from S4 [ 92.572331] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 92.572454] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram [ 92.572459] intel_pstate: Intel P-state driver initializing [ 92.572655] ledtrig-cpu: registered to indicate activity on CPUs [ 92.573156] NET: Registered protocol famiIPv6 [ 92.573308] NET: Registered protocol family 17 [ 92.573310] mpls_gso: MPLS GSO support [ 92.573430] mce: Unable to init device /dev/mcelog (rc: -sion=0x5e [ 91 <tigran@aivazistered taskstats version 1 [ 92.573630] zswap: loaded using pool lzo/zbud [ 92.573865] ima: No TPM chip found, activating TPM-bypass! [ 92.574717] rtc_cmos 00:04: setting system clock to 2018-01-23 17:32:21 UTC (1516728741) [ 92.574760] Warning: unable to open an initial console. [ 92.574992] Freeing unused kernel memory: 1408K [ 92.574993] Write protecting the kernel read-only data: 12288k [ 92.577005] Freeing unused kernel memory: 1980K [ 92.577284] Freeing unused kernel memory: 1248K [ 92.597649] x86/mm: Checked W+X mappings: FAILED, 4090 W+X pages found. [ 92.614351] systemd-udevd[112]: starting version 232 [ 92.645786] hidraw: raw HID events driver (C) Jiri Kosina [ 92.654018] thermal LNXTHERM:00: registered as thermal_zone0 [ 92.654021] ACPI: Thermal Zone [TZ00] (28 C) [ 92.654205] thermal LNXTHERM:01: registered as thermal_zone1 [ 92.654207] ACPI: Thermal Zone [TZ01] (30 C) [ 92.654852] ACPI: bus type USB registered [ 92.654865] usbcore: registered new interface driver usbfs [ 92.654871] usbcore: registered new interface driver hub [ 92.654895] usbcore: registered new device driver usb [ 92.655407] SCSI subsystem initialized [ 92.655649] pps_core: LinuxPPS API ver. 1 registered [ 92.655653] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 92.655909] PTP clock support registered [ 92.655945] Already setup the GSI :16 [ 92.655981] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 92.655984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 92.656091] dca service started, version 1.12.1 [ 92.657055] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 92.657109] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 92.657113] igb: Copyright (c) 2007-2014 Intel Corporation. [ 92.657175] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 92.657177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 92.657178] usb usb1: Product: xHCI Host Controller [ 92.657179] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd [ 92.657180] usb usb1: SerialNumber: 0000:00:14.0 [ 92.657244] Already setup the GSI :18 [ 92.657336] hub 1-0:1.0: USB hub found [ 92.657361] hub 1-0:1.0: 16 ports detected [ 92.658162] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 92.658167] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 92.658206] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 92.658208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 92.658209] usb usb2: Product: xHCI Host Controller [ 92.658210] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd [ 92.658211] usb usb2: SerialNumber: 0000:00:14.0 [ 92.658223] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session. [ 92.658284] hub 2-0:1.0: USB hub found [ 92.658295] hub 2-0:1.0: 10 ports detected [ 92.659026] Already setup the GSI :16 [ 92.662965] AVX2 version of gcm_enc/dec engaged. [ 92.662968] AES CTR mode by8 optimization enabled [ 92.669268] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 92.669272] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 92.682328] pps pps0: new PPS source ptp0 [ 92.682331] igb 0000:02:00.0: added PHC on eth0 [ 92.682332] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 92.682333] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00 [ 92.682382] igb 0000:02:00.0: eth0: PBA No: 006200-000 [ 92.682383] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 92.682473] Already setup the GSI :19 [ 92.683319] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session. [ 92.706912] pps pps1: new PPS source ptp1 [ 92.706914] igb 0000:03:00.0: added PHC on eth1 [ 92.706915] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 92.706917] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01 [ 92.706965] igb 0000:03:00.0: eth1: PBA No: 006200-000 [ 92.706966] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 92.707704] igb 0000:02:00.0 eno1: renamed from eth0 [ 92.729108] igb 0000:03:00.0 eno2: renamed from eth1 [ 92.765517] scsi host0: ahci [ 92.765606] scsi host1: ahci [ 92.765678] scsi host2: ahci [ 92.765743] scsi host3: ahci [ 92.765804] scsi host4: ahci [ 92.765864] scsi host5: ahci [ 92.765926] scsi host6: ahci [ 92.765988] scsi host7: ahci [ 92.766014] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 189 [ 92.766016] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 189 [ 92.766018] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 189 [ 92.766019] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 189 [ 92.766021] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 189 [ 92.766022] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 189 [ 92.766024] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 189 [ 92.766025] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 189 [ 92.766052] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 92.766149] Already setup the GSI :16 [ 92.766189] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 92.766270] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 92.989012] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 93.080298] ata3: SATA link down (SStatus 0 SControl 300) [ 93.080315] ata5: SATA link down (SStatus 0 SControl 300) [ 93.080330] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 93.080345] ata7: SATA link down (SStatus 0 SControl 300) [ 93.080359] ata4: SATA link down (SStatus 0 SControl 300) [ 93.080374] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 93.080387] ata8: SATA link down (SStatus 0 SControl 300) [ 93.080401] ata6: SATA link down (SStatus 0 SControl 300) [ 93.084736] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133 [ 93.084747] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 93.092523] ata1.00: configured for UDMA/133 [ 93.092796] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5 [ 93.100511] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133 [ 93.100520] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 93.108352] ata2.00: configured for UDMA/133 [ 93.129375] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5 [ 93.150221] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10 [ 93.150223] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 93.150225] usb 1-1: Product: Virtual Keyboard and Mouse [ 93.150226] usb 1-1: Manufacturer: American Megatrends Inc. [ 93.150227] usb 1-1: SerialNumber: serial [ 93.151627] random: crng init done [ 93.152637] usbcore: registered new interface driver usbhid [ 93.152638] usbhid: USB HID core driver [ 93.153062] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0 [ 93.153145] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0 [ 93.153219] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1 [ 93.153258] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1 [ 93.174398] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 93.174413] sd 0:0:0:0: [sda] Write Protect is off [ 93.174420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.174442] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 93.174509] sd 1:0:0:0: [sdb] Write Protect is off [ 93.174534] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.215679] sdb: sdb1 sdb2 sdb3 sdb4 [ 93.216363] sd 1:0:0:0: [sdb] Attached SCSI disk [ 93.220777] sda: sda1 sda2 sda3 sda4 [ 93.221040] sd 0:0:0:0: [sda] Attached SCSI disk [ 93.418814] md: bind<sda4> [ 93.447802] md: bind<sdb4> [ 93.449300] md: bind<sdb2> [ 93.449931] md: raid1 personality registered for level 1 [ 93.450193] md/raid1:md4: active with 2 out of 2 mirrors [ 93.489039] clocksource: Switched to clocksource tsc [ 93.494463] created bitmap (29 pages) for device md4 [ 93.495472] md4: bitmap initialized from disk: read 2 pages, set 0 of 59234 bits [ 93.517295] md4: detected capacity change from 0 to 3975079198720 [ 93.518784] md: bind<sda2> [ 93.520110] md/raid1:md2: active with 2 out of 2 mirrors [ 93.520122] md2: detected capacity change from 0 to 20970405888 [ 93.799453] device-mapper: uevent: version 1.0.3 [ 93.799524] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [ 95.643596] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 95.643623] e100: Copyright(c) 1999-2006 Intel Corporation [ 95.645594] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 95.647442] sis900.c: v1.08.10 Apr. 2 2006 [ 95.649354] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 95.651386] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 95.651388] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 95.653685] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 95.653687] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 95.660875] sky2: driver version 1.30 [ 95.662864] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 95.672142] megasas: 06.811.02.00-rc1 [ 95.689454] md: raid0 personality registered for level 0 [ 95.756942] raid6: sse2x1 gen() 13516 MB/s [ 95.824951] raid6: sse2x1 xor() 9095 MB/s [ 95.892942] raid6: sse2x2 gen() 16599 MB/s [ 95.960945] raid6: sse2x2 xor() 11618 MB/s [ 96.028941] raid6: sse2x4 gen() 18891 MB/s [ 96.096950] raid6: sse2x4 xor() 13350 MB/s [ 96.164940] raid6: avx2x1 gen() 26423 MB/s [ 96.232940] raid6: avx2x2 gen() 30474 MB/s [ 96.300939] raid6: avx2x4 gen() 33850 MB/s [ 96.300963] raid6: using algorithm avx2x4 gen() 33850 MB/s [ 96.300964] raid6: using avx2x2 recovery algorithm [ 96.301380] xor: automatically using best checksumming function avx [ 96.301549] async_tx: api initialized (async) [ 96.302783] md: raid6 personality registered for level 6 [ 96.302788] md: raid5 personality registered for level 5 [ 96.302789] md: raid4 personality registered for level 4 [ 96.306575] Fusion MPT base driver 3.04.20 [ 96.306577] Copyright (c) 1999-2008 LSI Corporation [ 96.307291] Fusion MPT SPI Host driver 3.04.20 [ 96.309729] Fusion MPT SAS Host driver 3.04.20 [ 96.311578] Fusion MPT misc device (ioctl) driver 3.04.20 [ 96.311616] mptctl: Registered with Fusion MPT base driver [ 96.311618] mptctl: /dev/mptctl @ (major,minor=10,220) [ 96.321085] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 96.321087] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 96.324759] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 96.326692] QLogic/NetXen Network Driver v4.0.82 [ 96.330460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 96.332306] uhci_hcd: USB Universal Host Controller Interface driver [ 96.334306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 96.337356] md: linear personality registered for level -1 [ 96.339119] md: multipath personality registered for level -4 [ 96.347705] md: raid10 personality registered for level 10 [ 106.357176] Btrfs loaded, crc32c=crc32c-intel [ 115.381061] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null) [ 115.437823] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200 [ 115.437823] [ 115.437850] CPU: 4 PID: 1 Comm: init Not tainted 4.9.0-5-amd64 #1 Debian 4.9.65-3+deb9u2 [ 115.437851] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0026.092720170729 09/27/2017 [ 115.437853] 0000000000000000 ffffffff81329964 ffff8808376be000 ffffc9004316bea8 [ 115.437855] ffffffff8117a66d ffff880800000010 ffffc9004316beb8 ffffc9004316be50 [ 115.437858] 29f2268c18d777cb ffff8808376be040 0000000000000200 ffff8808376ea490 [ 115.437860] Call Trace: [ 115.437864] [<ffffffff81329964>] ? dump_stack+0x5c/0x78 [ 115.437866] [<ffffffff8117a66d>] ? panic+0xe4/0x22d [ 115.437868] [<ffffffff8107b22b>] ? do_exit+0xadb/0xae0 [ 115.437870] [<ffffffff8107b2aa>] ? do_group_exit+0x3a/0xa0 [ 115.437871] [<ffffffff8107b320>] ? SyS_exit_group+0x10/0x10 [ 115.437874] [<ffffffff8160761e>] ? system_call_fast_compare_end+0xc/0xb7 [ 115.437883] Kernel Offset: disabled (XEN) Hardware Dom0 crashed: rebooting machine in 5 seconds.
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xenproject.org https://lists.xenproject.org/mailman/listinfo/xen-devel
