I just got it to work. As that link said I disabled USB_DWC2 in the kernel and now it boots! I hope it works fine later. Thanks.
-- Saeed Mirzamohammadi Ph.D. candidate Computer Science Department University of California, Irvine On Tue, Aug 29, 2017 at 11:55 AM, Saeed Mirzamohammadi <sa...@uci.edu> wrote: > Thanks for your feedback. Yes, I'm using "HiKey" that I recently bought. I > tried RELEASE-4.9.0 and RELEASE-4.8.0 and RELEASE-4.7.3. None of them > boots. There were little differences. Xen 4.8 printed one line more and > stopped: > ~~~~~~~~~~~ > ....... > (XEN) Freed 268kB init memory. > (XEN) Hardware Dom0 shutdown: rebooting machine > ~~~~~~~~~~~ > Xen 4.9 rebooted after it failed to boot. > > Do you think the issue is with the Xen version? > > This is how I build Xen: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > cd xen/xen > export CROSS_COMPILE=aarch64-linux-gnu- > export ARCH=arm64 > export XEN_TARGET_ARCH=arm64 > make defconfig > make -j8 > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~` > > Should I make specific config for HiKey? > > And in this link: https://lists.gt.net/xen/devel/433472, they could boot > the system by disabling the USB_DWC2 in the kernel. I tried modifying the > .config file directly and disabling the ones related to USB_DWC2 > (commenting the line out) but when I tried rebuilding the kernel it > restarted generating the .config file. So I couldn't apply this comment. > > -- > Saeed Mirzamohammadi > Ph.D. candidate > Computer Science Department > University of California, Irvine > > On Tue, Aug 29, 2017 at 7:12 AM, Konrad Rzeszutek Wilk < > konrad.w...@oracle.com> wrote: > >> On Mon, Aug 28, 2017 at 06:23:41PM -0700, Saeed Mirzamohammadi wrote: >> > Hi, >> > >> > I'm following instructions on https://wiki.xenproject.org/wiki/HiKey >> and >> > https://github.com/Jeeppler/xen-note/blob/master/ >> > arm64/hikey/hikey-xen-centos.md. >> >> And just to make sure, you are using HiKey not Hikey960. There is a big >> difference between them and you can only buy Hikey960 nowadays. >> >> CC-ed Stefano >> > >> > I'm trying to boot Xen on Hikey but Dom0 doesn't boot after Xen! I can >> boot >> > the linux individually with startup.sh. This works fine but when I try >> to >> > boot xen (typing 4 and then xen), I get a couple of Xen messages and >> when >> > it tries to boot Dom0 it fails and it stops there.These are the last >> > messages: >> > >> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> > (XEN) *** LOADING DOMAIN 0 *** >> > (XEN) Loading kernel from boot module @ 000000007a029000 >> > (XEN) Loading ramdisk from boot module @ 000000000ae00000 >> > (XEN) Allocating 1:1 mappings totalling 512MB for dom0: >> > (XEN) BANK[0] 0x00000040000000-0x00000060000000 (512MB) >> > (XEN) Grant table range: 0x00000005c00000-0x00000005c5e000 >> > (XEN) Loading zImage from 000000007a029000 to >> > 0000000040080000-0000000040ce8400 >> > (XEN) Loading dom0 initrd from 000000000ae00000 to >> > 0x0000000048200000-0x0000000048a00000 >> > (XEN) Allocating PPI 16 for event channel interrupt >> > (XEN) Loading dom0 DTB to 0x0000000048000000-0x000000004800aec1 >> > (XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs >> > (XEN) ..done. >> > (XEN) Initial low memory virq threshold set at 0x4000 pages. >> > (XEN) Std. Loglevel: All >> > (XEN) Guest Loglevel: All >> > (XEN) *** Serial input -> DOM0 (type 'CTRL-x' three times to switch >> input >> > to Xen) >> > (XEN) Freed 276kB init memory. >> > (XEN) traps.c:2505:d0v0 HSR=0x92000061 pc=0xffffffc0003f86ac >> > gva=0xffffff800024000c gpa=0x00000021fc000c >> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> > >> > My Xen version is: 4.7.0.rc4 and my dom0 is: android-hikey-linaro-4.1. I >> >> That is a bit old. How about Xen 4.9? >> >> > tried earlier Xen version but no difference. >> > >> > This is my *xen.cfg*: >> > options=dom0_mem=512M dom0_max_vcpus=4 conswitch=x console=dtuart >> > dtuart=/smb/uart@f7113000 >> > kernel=Image console=hvc0 root=/dev/mmcblk0p9 rootwait rw 3 >> > dtb=hi6220-hikey.dtb >> > >> > and my *startup.nsh*: >> > FS0: >> > Image dtb=hi6220-hikey.dtb console=ttyAMA3,115200 root=/dev/mmcblk0p9 >> > rootwait rw efi=noruntime >> > >> > I've checked out the thread here or others: https://lists.gt.net/ >> > xen/devel/433472 but I have passed the dtb file in the xen.cfg and still >> > Dom0 doesn't boot. >> > >> > Any help is greatly appreciated. >> > >> > Thanks a lot, >> > >> > -- >> > Saeed Mirzamohammadi >> > Ph.D. candidate >> > Computer Science Department >> > University of California, Irvine >> >> > _______________________________________________ >> > Xen-devel mailing list >> > Xen-devel@lists.xen.org >> > https://lists.xen.org/xen-devel >> >> >
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel
