Thanks for your feedback. Yes, I'm using "HiKey" that I recently bought. I tried RELEASE-4.9.0 and RELEASE-4.8.0 and RELEASE-4.7.3. None of them boots. There were little differences. Xen 4.8 printed one line more and stopped: ~~~~~~~~~~~ ....... (XEN) Freed 268kB init memory. (XEN) Hardware Dom0 shutdown: rebooting machine ~~~~~~~~~~~ Xen 4.9 rebooted after it failed to boot.
Do you think the issue is with the Xen version? This is how I build Xen: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cd xen/xen export CROSS_COMPILE=aarch64-linux-gnu- export ARCH=arm64 export XEN_TARGET_ARCH=arm64 make defconfig make -j8 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~` Should I make specific config for HiKey? And in this link: https://lists.gt.net/xen/devel/433472, they could boot the system by disabling the USB_DWC2 in the kernel. I tried modifying the .config file directly and disabling the ones related to USB_DWC2 (commenting the line out) but when I tried rebuilding the kernel it restarted generating the .config file. So I couldn't apply this comment. -- Saeed Mirzamohammadi Ph.D. candidate Computer Science Department University of California, Irvine On Tue, Aug 29, 2017 at 7:12 AM, Konrad Rzeszutek Wilk < konrad.w...@oracle.com> wrote: > On Mon, Aug 28, 2017 at 06:23:41PM -0700, Saeed Mirzamohammadi wrote: > > Hi, > > > > I'm following instructions on https://wiki.xenproject.org/wiki/HiKey and > > https://github.com/Jeeppler/xen-note/blob/master/ > > arm64/hikey/hikey-xen-centos.md. > > And just to make sure, you are using HiKey not Hikey960. There is a big > difference between them and you can only buy Hikey960 nowadays. > > CC-ed Stefano > > > > I'm trying to boot Xen on Hikey but Dom0 doesn't boot after Xen! I can > boot > > the linux individually with startup.sh. This works fine but when I try to > > boot xen (typing 4 and then xen), I get a couple of Xen messages and when > > it tries to boot Dom0 it fails and it stops there.These are the last > > messages: > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Loading kernel from boot module @ 000000007a029000 > > (XEN) Loading ramdisk from boot module @ 000000000ae00000 > > (XEN) Allocating 1:1 mappings totalling 512MB for dom0: > > (XEN) BANK[0] 0x00000040000000-0x00000060000000 (512MB) > > (XEN) Grant table range: 0x00000005c00000-0x00000005c5e000 > > (XEN) Loading zImage from 000000007a029000 to > > 0000000040080000-0000000040ce8400 > > (XEN) Loading dom0 initrd from 000000000ae00000 to > > 0x0000000048200000-0x0000000048a00000 > > (XEN) Allocating PPI 16 for event channel interrupt > > (XEN) Loading dom0 DTB to 0x0000000048000000-0x000000004800aec1 > > (XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs > > (XEN) ..done. > > (XEN) Initial low memory virq threshold set at 0x4000 pages. > > (XEN) Std. Loglevel: All > > (XEN) Guest Loglevel: All > > (XEN) *** Serial input -> DOM0 (type 'CTRL-x' three times to switch input > > to Xen) > > (XEN) Freed 276kB init memory. > > (XEN) traps.c:2505:d0v0 HSR=0x92000061 pc=0xffffffc0003f86ac > > gva=0xffffff800024000c gpa=0x00000021fc000c > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > My Xen version is: 4.7.0.rc4 and my dom0 is: android-hikey-linaro-4.1. I > > That is a bit old. How about Xen 4.9? > > > tried earlier Xen version but no difference. > > > > This is my *xen.cfg*: > > options=dom0_mem=512M dom0_max_vcpus=4 conswitch=x console=dtuart > > dtuart=/smb/uart@f7113000 > > kernel=Image console=hvc0 root=/dev/mmcblk0p9 rootwait rw 3 > > dtb=hi6220-hikey.dtb > > > > and my *startup.nsh*: > > FS0: > > Image dtb=hi6220-hikey.dtb console=ttyAMA3,115200 root=/dev/mmcblk0p9 > > rootwait rw efi=noruntime > > > > I've checked out the thread here or others: https://lists.gt.net/ > > xen/devel/433472 but I have passed the dtb file in the xen.cfg and still > > Dom0 doesn't boot. > > > > Any help is greatly appreciated. > > > > Thanks a lot, > > > > -- > > Saeed Mirzamohammadi > > Ph.D. candidate > > Computer Science Department > > University of California, Irvine > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xen.org > > https://lists.xen.org/xen-devel > >
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel
