Hello Peter,
a simple search using 'ReplaceStudio64' will reveal that 'Flrig' or 'flrig'
string is only in "libhamlib-4.dll"
Btw., Mike is SK since a while. He may rest in peace.
73's de OE1MWW
Wolfgang
Wednesday, July 30, 2025, 12:39:51 PM, you wrote:
> Hi,
> if there is anyone who reads this who is familiar with the source code for
> WSJT-X who could help me identify how the list of rigs in the 'RADIO' tab
> gets populated? I have been wandering through the source (downloaded a
> tarball from the main WSJT-X web site) but my level of experience is just
> scripting, its all a bit much for me.
> My theory at this point is the list of rigs has an error in it or the way the
> list is read has an error. In ver 2.61 the rig list showed the entry for
> FLrig as being: "FLRig FLRig" and the INI file shows it as: Rig=FLRig FLRig
> When I go to one of the 2.7x version, the entry for FLRig is just : "FLRig"
> and in the INI file it is: Rig="FLRig "
> next test...
> On my ver 2.61 folder if I change the libhamlib-4.dll to be a newer version
> the wheels fall off with the same problems at startup (radio selection goes
> back to Adat and a com port) I see on ver 2.7x BUT if I try the reverse and
> install an OLD libhamlib-4.dll into the ver 2.7x folder it does not improve
> things sadly but will recheck this in the morning (8pm local and feeling
> tired)
> Does WSJT-X read the list of rigs from the Hamlib DLL file to populate the
> list of rigs on the radio TAB of the Settings screen? as it feels like that
> is what is happening as when I change the Hamlib DLL's, the entry for FLRig
> changes inside WSJT-X.
> If this a Hamlib error, then I guess I need to contact Mike but until I can
> clarify where it is I am lost to know where to look.
> Regards,
> Peter vk5pj
----------
under construction: https://www.oe1mww.work/
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
