Hi Andy, thanks for the link, will have a look there. Since my original post I have dug deeper and widened my field of testing. I can see on 'other' derivatives of WSJT-X that the rig type is stored as "Q65-eme\Configuration\Rig=FLRig FLRig" and not the mangled: Rig="FLRig " I see in the current releases of WSJT-X and the Improved version.
It would seem an error has crept into the code base at some point that mangles the storage of this parameter when selecting FLRig in the Configuration menu. Regards, Peter, vk5pj On Mon, Jul 28, 2025 at 3:07 AM Andrew Neumeier via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Peter, > > I don't know if this is a wjstx issue or a flrig issue. If you are unable > to rectify your problem with help from this group, may I suggest posing the > question to the linuxham group. I have placed the link below. That group > is active and involves the programs created by W1HKJ, including flrig. > > Best of luck, > 73, > Andy, ka2uqw > > https://groups.io/g/linuxham > > > > > > On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > Hi, > for some time now (all of the 2.7 variants and now 2.8) when I open > WJST-X or swap between configurations, I end up with a rig control error > and the current rig is shown to be "ADAT www.adat.ch" and not the > previously selected FLRIG setting. > > I have learned to live with this for a while and today decided I should > report this difficulty for evaluation. > > I use the FLRIG interface as it lets me see on my PC desktop what the SWR, > power out and other settings of my two icom rigs as I do a lot of operating > from the comfort of the house rather than the 50 metre journey to my shack > in the stables shed. > > So far I have tried an empty INI file a few times and the error occurs > with each iteration of testing I do, where I have set up multiple > configurations. > > If I leave it as a SINGLE configuration then there is no error seen. Once > I add a second or more configuration using FLRIG as the rig type I start > seeing the Rig control error when starting WSJT-X or swapping > configurations. > > When testing, if I use a direct connection (IC-7610) then I can add > multiple configurations and not see an error when starting or swapping > configs so the error seems to be confined to having FLRIG selected as a rig > type. > > PC is a Windows 10 X64 O/S which is current with all updates. > > I have noticed that in the WSJT-X.INI file, that FLRig is shown in there > with a trailing space and has inverted commas in some instances and in > differently in other config (quite a puzzle for me), where as other entries > are not shown like that, here are some examples from my BIG ini file that > has about 8 configurations in it > > Rig=Icom IC-7610 > Rig=FLRig FLRig > Rig="FLRig " > Rig=FLRig IC-7610(FLRig) > > hope I have no missed anything, any help would be appreciated > > Regards, > Peter, vk5pj > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel