Well, yes, but using split or fake-it you could be 100KHz off and still be transmitting a perfect signal.
Didn't take long to get a 40M FT8 QSO at 3KHz this afternoon when the band was essentially dead. It all depends on the _other_ guys receive capabiltiies, and that's not something we can control. 73, Willie N1JBJ > On Jul 9, 2021, at 3:58 PM, Al Pawlowski <[email protected]> wrote: > > I agree getting newer equipment regularly can be a problem. However, I have > seen many PSK Reporter spots of my CQ’s at around 4kHz (channel Tx) so there > does seem to be stations that can handle that range - i always use split > mode, so that probably helps. > > Al Pawlowski, K6AVP > Los Osos, CA USA > > >> On Jul 9, 2021, at 10:59, [email protected] >> <mailto:[email protected]> wrote: >> >> From: Gary McDuffie <[email protected] <mailto:[email protected]>> >> To: WSJT software development <[email protected] >> <mailto:[email protected]>> >> Subject: Re: [wsjt-devel] Message Bit to Request Other Station to QSY >> to your Frequency >> >> Remember, we are mostly using single sideband radios. They weren?t designed >> to be broadband receivers or transmitters. When you get above about 3500, >> you?ll find few people to go with you (jmho). I venture up there now and >> then, but I have no idea how the distortion or response is above 3K. For >> WSJT-X, I run 3400 receive high cutoff with 100 or sometimes zero as low end >> cutoff. Just yesterday, I saw someone about 3200, but he wasn?t doing well >> as far as pulling people up there. He was the only one. >> >> I was pleased last week when Europe opened up strong to our part of the >> country. Not only was 50.313 heavily loaded, but .323 was about 85-90% as >> full and stayed that way. >> >> Until the majority of the people have broadband receivers, the VFO will be >> the ruling factor as far as I can see. Not many people can run down to the >> corner radio store and grab a new radio off the shelf just to add some extra >> bandwidth for digital modes. >> >> Gary - AG0N > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
