Wilson, Phil wrote: > Get an MSI log to see what's going on. Look at all instances of > FindRelatedProducts to see if it's detecting your older product.
There are two sections of FindRelatedProducts in the log for the 1.1 version upgrade installation. MSI (c) (28:8C) [18:56:27:953]: Doing action: FindRelatedProducts MSI (c) (28:8C) [18:56:27:968]: Note: 1: 2205 2: 3: ActionText Action 18:56:27: FindRelatedProducts. Searching for related applications Action start 18:56:27: FindRelatedProducts. Action ended 18:56:27: FindRelatedProducts. Return value 1. and MSI (s) (C8:34) [18:56:32:968]: Doing action: FindRelatedProducts MSI (s) (C8:34) [18:56:32:984]: Note: 1: 2205 2: 3: ActionText Action 18:56:32: FindRelatedProducts. Searching for related applications Action start 18:56:32: FindRelatedProducts. MSI (s) (C8:34) [18:56:32:984]: Skipping FindRelatedProducts action: already done on client side Action ended 18:56:32: FindRelatedProducts. Return value 0. Does that look right? > Why is REP after InstallFinalize? I was following the recommendation in the fourth bullet point of the Sequence Restrictions section of http://msdn.microsoft.com/en-us/library/aa371197(VS.85).aspx. I've tried the other possibilities too. I still end up with two entries in the Add or Remove Programs table. -- Charles ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
