Neither of the versions have ALLUSERS set at all, because I want them to be
per-user. As I explained I worded that poorly. The installer with ALLUSERS=2
was for another product altogether, unrelated to this one.

Here's what I'm doing:

1. Build and install program with version 1.0.0.0 and ProductCode 'a'.
2. Change version to 1.0.0.1 and ProductCode to 'b', and install again.

At this point there are two entries in Add/Remove Programs, one for 1.0.0.0
and one for 1.0.0.1, despite all my efforts to make the latter remove the
former. Bear in mind these installers are IDENTICAL except for those two
tiny changes.

Logan


Ian Elliott (Excell Data Corporation) wrote:
> 
> It sounds like the two msi's don't have ALLUSERS set to the same value. I
> don't believe you can perform a major upgrade on msi's that don't match.
> They both have to be per-user or per-machine. You can't mix and match as
> far as major upgrades go.
> 
> -----Original Message-----
> From: chaiguy1337 [mailto:[EMAIL PROTECTED]
> Sent: Friday, October 24, 2008 2:23 PM
> To: wix-users@lists.sourceforge.net
> Subject: Re: [WiX-users] Run CA on uninstall, but not when updating
> (RemovePreviousVersions)
> 
> 
> I logged the install and found this, but I can't make any sense of it:
> 
> Action ended 17:16:57: InstallFinalize. Return value 1.
> MSI (s) (B8:58) [17:16:57:583]: Doing action: RemoveExistingProducts
> MSI (s) (B8:58) [17:16:57:583]: Note: 1: 2205 2:  3: ActionText
> Action 17:16:57: RemoveExistingProducts. Removing applications
> Action start 17:16:57: RemoveExistingProducts.
> MSI (s) (B8:58) [17:16:57:598]: Note: 1: 2205 2:  3: Error
> MSI (s) (B8:58) [17:16:57:598]: Note: 1: 2228 2:  3: Error 4: SELECT
> `Message` FROM `Error` WHERE `Error` = 22
> MSI (s) (B8:58) [17:16:57:600]: Note: 1: 2205 2:  3: Error
> MSI (s) (B8:58) [17:16:57:600]: Note: 1: 2228 2:  3: Error 4: SELECT
> `Message` FROM `Error` WHERE `Error` = 23
> MSI (s) (B8:58) [17:16:57:613]: Note: 1: 2205 2:  3: Error
> MSI (s) (B8:58) [17:16:57:613]: Note: 1: 2228 2:  3: Error 4: SELECT
> `Message` FROM `Error` WHERE `Error` = 16
> MSI (s) (B8:58) [17:16:57:617]: Note: 1: 2205 2:  3: Error
> MSI (s) (B8:58) [17:16:57:617]: Note: 1: 2228 2:  3: Error 4: SELECT
> `Message` FROM `Error` WHERE `Error` = 21
> Action ended 17:16:57: RemoveExistingProducts. Return value 1.
> 
> My WiX msi has no ALLUSERS property at all, wheras my original product had
> ALLUSERS=2. However, I want my new product to be per-user.
> 
> Logan
> 
> 
> cemiles wrote:
>>
>> Toss up a log if you can.
>>
>> I'd say check your ALLUSERS property between the 2 msis (see if
>> they're different).
> 
> 
> -----
> A. Logan Murray
> http://pihole.org/
> --
> View this message in context:
> http://n2.nabble.com/Run-CA-on-uninstall%2C-but-not-when-updating-%28RemovePreviousVersions%29-tp1372539p1373540.html
> Sent from the wix-users mailing list archive at Nabble.com.
> 
> 
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the
> world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> WiX-users mailing list
> WiX-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wix-users
> 
> 
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the
> world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> WiX-users mailing list
> WiX-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wix-users
> 
> 


-----
A. Logan Murray
http://pihole.org/
-- 
View this message in context: 
http://n2.nabble.com/Run-CA-on-uninstall%2C-but-not-when-updating-%28RemovePreviousVersions%29-tp1372539p1373774.html
Sent from the wix-users mailing list archive at Nabble.com.


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
WiX-users mailing list
WiX-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wix-users

Reply via email to