Today 14:th of April at 18:00 UTC. I installed new iwlwifi
firmware from ports and refreshed /usr/src tree from Git,
and rebuildt the kernel
I also reconfigured my old 4G/Wifi Modem-gateway to B/G/N
2.4 Gbit band, 40 Mhz
looks like Im now running 11ng 300 Mbits to the 4G/WIFI modem.
4G speed is ofcourse lower
Wlan0 now says :
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether f4:7b:09:b0:ba:3f
inet 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255
groups: wlan
ssid xxxxxx channel 1 (2412 MHz 11g ht/40+) bssid 50:9f:27:79:c2:a3
regdomain ETSI country SE authmode WPA2/802.11i privacy ON
deftxkey UNDEF TKIP 2:128-bit txpower 30 bmiss 7 scanvalid 60
protmode CTS -ampdu ampdulimit 8k ampdudensity 8 -amsdutx amsdurx
shortgi -ldpctx ldpcrx -uapsd wme roaming MANUAL
parent interface: iwlwifi0
media: IEEE 802.11 Wireless Ethernet *MCS mode 11ng*
status: associated
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
and /var/run/dmesg.boot says this with verbose boot and
compat.linuxkpi.iwlwifi_11n_disable=0
in /boot/loader.conf
What is this iwl-debug-yoyo.bin ? where is it to be found ?
do i need it ?
iwlwifi0: using IRQs 152-165 for MSI-X
iwlwifi0: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
iwlwifi0: PCI dev 06f0/0070, rev=0x351, rfid=0x10a100
iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz
iwlwifi-QuZ-a0-hr-b0-77.ucode: could not load firmware image, error 8
Trying to load binary firmware from
/boot/firmware/iwlwifi-QuZ-a0-hr-b0-77.ucode
firmware: '/boot/firmware/iwlwifi-QuZ-a0-hr-b0-77.ucode' version 0:
1406124 bytes loaded at 0xfffffe01b8114000
iwlwifi-QuZ-a0-hr-b0-77.ucode: Loaded binary firmware using
/boot/firmware/iwlwifi-QuZ-a0-hr-b0-77.ucode
iwlwifi0: successfully loaded firmware image 'iwlwifi-QuZ-a0-hr-b0-77.ucode'
iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
iwl-debug-yoyo.bin: could not load firmware image, error 2
Trying to load binary firmware from /boot/firmware/iwl-debug-yoyo.bin
iwl-debug-yoyo.bin: could not load binary firmware
/boot/firmware/iwl-debug-yoyo.bin either
iwl-debug-yoyo.bin: could not load firmware image, error 2
Trying to load binary firmware from /boot/firmware/iwl-debug-yoyo.bin
iwl-debug-yoyo.bin: could not load binary firmware
/boot/firmware/iwl-debug-yoyo.bin either
iwl-debug-yoyo_bin: could not load firmware image, error 2
Trying to load binary firmware from /boot/firmware/iwl-debug-yoyo_bin
iwl-debug-yoyo_bin: could not load binary firmware
/boot/firmware/iwl-debug-yoyo_bin either
iwl_debug_yoyo_bin: could not load firmware image, error 2
Trying to load binary firmware from /boot/firmware/iwl_debug_yoyo_bin
iwl_debug_yoyo_bin: could not load binary firmware
/boot/firmware/iwl_debug_yoyo_bin either
iwlwifi0: loaded firmware version 77.0b4c06ad.0 QuZ-a0-hr-b0-77.ucode
op_mode iwlmvm
iwlwifi0: Detected RF HR B5, rfid=0x10a100
iwlwifi0: base HW address: f4:7b:09:b0:ba:3f
iwlwifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwlwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwlwifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwlwifi0: 2T2R
iwlwifi0: 11na MCS 20MHz
iwlwifi0: MCS 0-7: 6.5Mbps - 65Mbps
iwlwifi0: MCS 8-15: 13Mbps - 130Mbps
iwlwifi0: 11na MCS 20MHz SGI
iwlwifi0: MCS 0-7: 7Mbps - 72Mbps
iwlwifi0: MCS 8-15: 14.5Mbps - 144.5Mbps
iwlwifi0: 11na MCS 40MHz:
iwlwifi0: MCS 0-7: 13.5Mbps - 135Mbps
iwlwifi0: MCS 8-15: 27Mbps - 270Mbps
iwlwifi0: 11na MCS 40MHz SGI:
iwlwifi0: MCS 0-7: 15Mbps - 150Mbps
iwlwifi0: MCS 8-15: 30Mbps - 300Mbps
iwlwifi0: 11ng MCS 20MHz
iwlwifi0: MCS 0-7: 6.5Mbps - 65Mbps
iwlwifi0: MCS 8-15: 13Mbps - 130Mbps
iwlwifi0: 11ng MCS 20MHz SGI
iwlwifi0: MCS 0-7: 7Mbps - 72Mbps
iwlwifi0: MCS 8-15: 14.5Mbps - 144.5Mbps
iwlwifi0: 11ng MCS 40MHz:
iwlwifi0: MCS 0-7: 13.5Mbps - 135Mbps
iwlwifi0: MCS 8-15: 27Mbps - 270Mbps
iwlwifi0: 11ng MCS 40MHz SGI:
iwlwifi0: MCS 0-7: 15Mbps - 150Mbps
iwlwifi0: MCS 8-15: 30Mbps - 300Mbps
