HI

     The    service  used  to  measure  the  bandwitdh  is  the Sweden   based   " Bredbandskollen"

https://www.bredbandskollen.se/

https://www.bredbandskollen.se/en/                        ( english )


            The  Low  upload  speed measured  is a  feature  of the   ISP   service.

the  wireless router is a   CH7486E   cable modem   on the 5 GHz   band  80Mhz   Bandwitdh.    802.11a/n/ac

WIFI M.2 card  is:

pci:8086-06f0-8086-0070;02-80-00;works;network;iwlwifi;Intel Corporation;Comet Lake PCH CNVi WiFi


sysctl compat.linuxkpi.80211.wlan0
compat.linuxkpi.80211.wlan0.dump_stas:
lsta 0xfffff800535c0800 sta 0xfffff800535c08c0 added_to_drv 1
nl80211_sta_info (valid fields) 0x00004103<BEACON_RX,BEACON_SIGNAL_AVG,SIGNAL_AVG,TX_BITRATE>
connected_time 0 inactive_time 0
rx_bytes 0 rx_packets 0 rx_dropped_misc 0
rx_duration 0 rx_beacon 6866 rx_beacon_signal_avg -43
tx_bytes 0 tx_packets 0 tx_failed 0
tx_duration 0 tx_retries 0
signal 0 signal_avg -42 ack_signal 0 avg_ack_signal 0
generation 0 assoc_req_ies_len 0 chains 0
rxrate: flags 0 bw 0(20) legacy 0 kbit/s mcs 0 nss 0
        he_dcm 0 he_gi 0 he_ru_alloc 0 eht_gi 0
txrate: flags 6<VHT_MCS,SGI> bw 4(80) legacy 0 kbit/s mcs 9 nss 2
        he_dcm 0 he_gi 0 he_ru_alloc 0 eht_gi 0


Regards

//Lars

On 3/11/25 10:50, Bjoern A. Zeeb wrote:
On Sun, 9 Mar 2025, Lars Tunkrans wrote:

Hi Lars,

thank you for testing and reporting back.

  I  just  added  the  settings  for  upping  the   wireless  SPEED  on iwlwifi.

using

compat.linuxkpi.80211.hw_crypto=1
compat.linuxkpi.iwlwifi_11n_disable=0
compat.linuxkpi.iwlwifi_disable_11ac=0

in /boot/loader.conf

with  the  new  patches to FreeBSD 15-current   from 28 of  february  on iwlwifi    laptop achives :

*  26  MegaBytes*  download  and  5.3 MegaBytes  Upload.

The TX rate I assume could be a bit higher.  How did you measure?

Could you send me the output of
    sysctl compat.linuxkpi.80211.wlan0

Lots of joy,
Bjoern

Reply via email to