Thank you for pointing that out. Op zaterdag 15 februari 2025 om 02:00:08 UTC+1 schreef vince:
> "source ~/weewx-venv/bin/activate" to activate your python virtual > environment, then the weectl command will work. > > You did a pip installation, so you always need to activate your venv > before running weewx commands. > > On Friday, February 14, 2025 at 2:57:18 PM UTC-8 Artvd wrote: > >> Thank for your replies. I have found a working driver and got things >> working. However when i tried to use "weectl extension" to install the >> neoground skin, i got the message that the "command weectl" can not be >> found. >> I found "weectl" 2x in the home/user section on my Rasberry PI. When i >> tried to use those files, i got the message that access is disallowed, also >> with sudo. >> How can install the skin? >> >> >> >> Op vrijdag 14 februari 2025 om 01:07:57 UTC+1 schreef Tom Keffer: >> >>> Perhaps it was a typo, but did you say you are using WeatherLink Live? >>> The WeeWX Vantage driver does not support that. Or, did you mean you have >>> the WeatherLink IP, which the driver does support? >>> >>> It's possible that you are not looking at the same weewx.conf file that >>> weewxd is using. The log will tell. >>> >>> If you're still stuck, set debug=1, restart weewx, then send the log. >>> See *How to get a useful log report >>> <https://github.com/weewx/weewx/wiki/view-logs#how-to-produce-a-useful-log-report>*. >>> >>> Please do not send a screenshot! >>> >>> On Thursday, February 13, 2025 at 3:58:28 PM UTC-8 Artvd wrote: >>> >>>> I attach a copy of the vantage driver section. [image: >>>> PXL_20250213_234135905-min.jpg] >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/f80f80b2-559f-4111-8132-73d563dbc2a4n%40googlegroups.com.
