Reply received via email - for future replies to weewx-user posts could you please use the '*Reply all*' button rather than '*Reply to author*'. '*Reply all*' posts publicly on weewx-user avoiding my spam filter discarding your 'post', let's someone else chime in if needed and most importantly maintains a public record of the issue to aid others in the future.
Unfortunately your log extract truncated the entire WeeWX startup so there is no detail on the WeeWX configuration. Please try again, if you are following the instructions previously linked make sure you start the capture of the log before you restart WeeWX otherwise you will miss the WeeWX startup. The debug report looks fine. There are a few extractor entries under [Accumulator] in weewx.conf that don't appear to make much sense (uvradiation, rrain_piezo, erain_piezo, hrain_piezo, drain_piezo, wrain_piezo, mrain_piezo, yrain_piezo), but they will not be the cause of the problem. That being said I suspect that you do not actually want to use the uvradiation field. I note in your original post you want to facilitate plotting of radiation and ET. In that case I suspect you will be wanting to use the light value from the gateway device to approximate solar radiance rather than the uvradiation field. You will find further background on this in the Ecowitt gateway device driver wiki FAQ page <https://github.com/gjr80/weewx-gw1000/wiki/Frequently-asked-questions> under '*My Ecowitt station has a light sensor on my station, but I don't see WeeWX field radiation. Where is it?*' The linked page *Understanding Ecowitt LAN Wi Fi Gateway API radiation fields <https://github.com/gjr80/weewx-gw1000/wiki/Understanding-Ecowitt-LAN-Wi-Fi-Gateway-API-radiation-fields>* also provides further background and instructions for approximating solar irradiance. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/a972bf43-7c59-4a7a-ad26-951d0c3ee470n%40googlegroups.com.
