Do the unplug plugin test and show ‘sudo dmesg’ please
On Sunday, February 2, 2025 at 4:15:01 PM UTC-8 scott pierce wrote:
> scott@spi-1:/etc/weewx $ sudo lsusb
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 003 Device 003: ID 045e:07f8 Microsoft Corp. Wired Keyboard 600 (model
> 1576)
> Bus 003 Device 002: ID 046d:c077 Logitech, Inc. Mouse
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 002: ID 10c4:ea61 Silicon Labs CP210x UART Bridge
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> Does this help?
>
> On Sunday, February 2, 2025 at 7:09:27 PM UTC-5 vince wrote:
>
>> Sure it could, try “lsusb” to list the usb devices found. You might need
>> to preface it with sudo. Alternately unplug it, wait a couple seconds,
>> plug it back in and run “sudo dmesg” to see kernel messages that usually
>> have enough info to figure it out.
>>
>> On Sunday, February 2, 2025 at 4:01:50 PM UTC-8 scott pierce wrote:
>>
>>> Ran the journal log and it produced this:
>>>
>>> Feb 01 16:48:38 scott systemd[1]: Started weewx.service - WeeWX.
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Initializing weewxd
>>> version 5.1.0
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Command line:
>>> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Using Python: 3.11.2
>>> (main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Located at:
>>> /usr/bin/python3
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Platform:
>>> Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Locale:
>>> 'en_US.UTF-8'
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Entry path:
>>> /usr/share/weewx/weewxd.py
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: WEEWX_ROOT:
>>> /etc/weewx
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Config file:
>>> /etc/weewx/weewx.conf
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User module:
>>> /etc/weewx/bin/user
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Debug: 0
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User: weewx
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Group: weewx
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Groups: weewx
>>> Feb 01 16:48:38 scott weewxd[3395]: INFO weewx.engine: Loading station
>>> type Vantage (weewx.drivers.vantage)
>>> Feb 01 16:48:38 scott weewxd[3395]: ERROR weewx.engine: Import of
>>> driver failed: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No
>>> such file or directory: '/dev/ttyUSB0' (<class
>>> 'serial.serialutil.SerialException'>)
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> Traceback (most recent call last):
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 322, in
>>> open
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> FileNotFoundError: [Errno 2] No such file or directory: '/dev/ttyUSB0'
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> During handling of the above exception, another exception occurred:
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> Traceback (most recent call last):
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/share/weewx/weewx/engine.py", line 115, in setupStation
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> self.console = loader_function(config_dict, self)
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 32, in loader
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> return VantageService(engine, config_dict)
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2046, in __init__
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> Vantage.__init__(self, **config_dict[DRIVER_NAME])
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 536, in __init__
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> self.port.openPort()
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 319, in openPort
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> self.serial_port = serial.Serial(self.port, self.baudrate,
>>> timeout=self.timeout)
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>>
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/lib/python3/dist-packages/serial/serialutil.py", line 244, in
>>> __init__
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> self.open()
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 325, in
>>> open
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> raise SerialException(msg.errno, "could not open port {}:
>>> {}".format(self._port, msg))
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>>> serial.serialutil.SerialException: [Errno 2] could not open port
>>> /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: Unable to load
>>> driver: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
>>> or directory: '/dev/ttyUSB0'
>>> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: ****
>>> Exiting...
>>> Feb 01 16:48:38 scott systemd[1]: weewx.service: Main process exited,
>>> code=exited, status=4/NOPERMISSION
>>> Feb 01 16:48:38 scott systemd[1]: weewx.service: Failed with result
>>> 'exit-code'.
>>> Feb 01 20:26:36 spi-1 systemd[1]: Started weewx.service - WeeWX.
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Initializing weewxd
>>> version 5.1.0
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Command line:
>>> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Using Python: 3.11.2
>>> (main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Located at:
>>> /usr/bin/python3
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Platform:
>>> Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Locale:
>>> 'en_US.UTF-8'
>>> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Entry path:
>>> /usr/share/weewx/weewxd.py
>>> lines 1-56
>>>
>>> *To an uneducated brain, this looks like a problem with the driver for
>>> the USB data logger from the Envoy. I have NO idea what port the USB is
>>> going to on the Rpi so I just selected "the most common" option in the auto
>>> install process. Could this be the issue?*
>>> *Thanks*
>>> *Scott*
>>>
>>>
>>> On Sunday, February 2, 2025 at 6:22:56 PM UTC-5 scott pierce wrote:
>>>
>>>> Here is what I have:
>>>> scott@spi-1:~ $ groups
>>>> scott adm dialout cdrom sudo audio video plugdev games users input
>>>> render netdev lpadmin weewx gpio i2c spi
>>>> scott@spi-1:~ $
>>>>
>>>> and
>>>>
>>>> scott@spi-1:~ $ groups weewx
>>>> weewx : weewx
>>>>
>>>>
>>>> On Sunday, February 2, 2025 at 4:10:06 PM UTC-5 vince wrote:
>>>>
>>>>> weewx.service: Main process exited, code=exited, status=4/NOPERMISSION
>>>>> generally means the user running the command is not in the required unix
>>>>> groups, which can be a little tricky to get right especially as a new
>>>>> linuc
>>>>> user.
>>>>>
>>>>> Try ‘groups’ to see which groups your account is in, and ‘groups
>>>>> weewx’ to see which groups the weewx user is in. Your shell prompt is a
>>>>> bit
>>>>> unusual so I can’t see which account you are using in your log excerpts.
>>>>> On Sunday, February 2, 2025 at 12:15:45 PM UTC-8 scott pierce wrote:
>>>>>
>>>>>> *and here are the results when I run weectl device...still showing an
>>>>>> unknown hardware issue:*
>>>>>>
>>>>>> @-1:~ $ weectl device
>>>>>> Using configuration file /etc/weewx/weewx.conf
>>>>>> Using driver weewx.drivers.vantage.
>>>>>> Using Vantage driver version 3.6.2 (weewx.drivers.vantage)
>>>>>> Unable to wake up console... sleeping
>>>>>> Unable to wake up console... retrying
>>>>>> Traceback (most recent call last):
>>>>>> File "/usr/share/weewx/weectl.py", line 75, in <module>
>>>>>> main()
>>>>>> File "/usr/share/weewx/weectl.py", line 42, in main
>>>>>> weectllib.device_actions.device()
>>>>>> File "/usr/share/weewx/weectllib/device_actions.py", line 91, in
>>>>>> device
>>>>>> configurator.configure(config_dict)
>>>>>> File "/usr/share/weewx/weewx/drivers/__init__.py", line 71, in
>>>>>> configure
>>>>>> self.do_options(options, parser, config_dict, not
>>>>>> options.noprompt)
>>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2238, in
>>>>>> do_options
>>>>>> station = Vantage(**config_dict[DRIVER_NAME])
>>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 540, in
>>>>>> __init__
>>>>>>
>>>>>> log.debug("Hardware name: %s", self.hardware_name)
>>>>>> ^^^^^^^^^^^^^^^^^^
>>>>>>
>>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416, in
>>>>>> hardware_name
>>>>>> raise weewx.UnsupportedFeature("Unknown hardware type %d" %
>>>>>> self.hardware_type)
>>>>>> weewx.UnsupportedFeature: Unknown hardware type 10
>>>>>> @1:~ $
>>>>>>
>>>>>> On Sunday, February 2, 2025 at 3:10:39 PM UTC-5 scott pierce wrote:
>>>>>>
>>>>>>> *Here is the info that came through after running weectl debug:*
>>>>>>>
>>>>>>> System info
>>>>>>> Platform: Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>>>>>>> Python Version: 3.11.2
>>>>>>>
>>>>>>> Load Information
>>>>>>> 1 minute load average: 0.00
>>>>>>> 5 minute load average: 0.04
>>>>>>> 15 minute load average: 0.13
>>>>>>>
>>>>>>> General Weewx info
>>>>>>> Weewx version 5.1.0 detected.
>>>>>>>
>>>>>>> Currently installed extensions
>>>>>>> No extensions installed.
>>>>>>>
>>>>>>> Archive info
>>>>>>> Database name: weewx.sdb
>>>>>>> Table name: archive
>>>>>>> Version 4.0
>>>>>>> Unit system: 1 (US)
>>>>>>> First good timestamp: 2025-01-30 14:50:00 EST (1738266600)
>>>>>>> Last good timestamp: 2025-02-02 15:00:00 EST (1738526400)
>>>>>>> Number of records: 434
>>>>>>> weewx (weewx.conf) is set to use an archive interval of 300
>>>>>>> seconds.
>>>>>>> The station hardware was not interrogated to determine the archive
>>>>>>> interval.
>>>>>>>
>>>>>>> Supported SQL keys
>>>>>>> dateTime usUnits interval
>>>>>>>
>>>>>>> altimeter appTemp appTemp1
>>>>>>>
>>>>>>> barometer batteryStatus1 batteryStatus2
>>>>>>>
>>>>>>> batteryStatus3 batteryStatus4 batteryStatus5
>>>>>>>
>>>>>>> batteryStatus6 batteryStatus7 batteryStatus8
>>>>>>>
>>>>>>> cloudbase co co2
>>>>>>>
>>>>>>> consBatteryVoltage dewpoint dewpoint1
>>>>>>>
>>>>>>> ET extraHumid1 extraHumid2
>>>>>>>
>>>>>>> extraHumid3 extraHumid4 extraHumid5
>>>>>>>
>>>>>>> extraHumid6 extraHumid7 extraHumid8
>>>>>>>
>>>>>>> extraTemp1 extraTemp2 extraTemp3
>>>>>>>
>>>>>>> extraTemp4 extraTemp5 extraTemp6
>>>>>>>
>>>>>>> extraTemp7 extraTemp8 forecast
>>>>>>>
>>>>>>> hail hailBatteryStatus hailRate
>>>>>>>
>>>>>>> heatindex heatindex1 heatingTemp
>>>>>>>
>>>>>>> heatingVoltage humidex humidex1
>>>>>>>
>>>>>>> inDewpoint inHumidity inTemp
>>>>>>>
>>>>>>> inTempBatteryStatus leafTemp1 leafTemp2
>>>>>>>
>>>>>>> leafWet1 leafWet2
>>>>>>> lightning_distance
>>>>>>> lightning_disturber_count lightning_energy
>>>>>>> lightning_noise_count
>>>>>>> lightning_strike_count luminosity maxSolarRad
>>>>>>>
>>>>>>> nh3 no2 noise
>>>>>>>
>>>>>>> o3 outHumidity outTemp
>>>>>>>
>>>>>>> outTempBatteryStatus pb pm10_0
>>>>>>>
>>>>>>> pm1_0 pm2_5 pressure
>>>>>>>
>>>>>>> radiation rain
>>>>>>> rainBatteryStatus
>>>>>>> rainRate referenceVoltage rxCheckPercent
>>>>>>>
>>>>>>> signal1 signal2 signal3
>>>>>>>
>>>>>>> signal4 signal5 signal6
>>>>>>>
>>>>>>> signal7 signal8 snow
>>>>>>>
>>>>>>> snowBatteryStatus snowDepth snowMoisture
>>>>>>>
>>>>>>> snowRate so2 soilMoist1
>>>>>>>
>>>>>>> soilMoist2 soilMoist3 soilMoist4
>>>>>>>
>>>>>>> soilTemp1 soilTemp2 soilTemp3
>>>>>>>
>>>>>>> soilTemp4 supplyVoltage
>>>>>>> txBatteryStatus
>>>>>>> UV uvBatteryStatus
>>>>>>> windBatteryStatus
>>>>>>> windchill windDir windGust
>>>>>>>
>>>>>>> windGustDir windrun windSpeed
>>>>>>>
>>>>>>>
>>>>>>> Databases configured in weewx.conf:
>>>>>>> archive_sqlite:
>>>>>>> database_name weewx.sdb
>>>>>>> driver weedb.sqlite
>>>>>>> SQLITE_ROOT /var/lib/weewx
>>>>>>> archive_mysql:
>>>>>>> database_name weewx
>>>>>>> driver weedb.mysql
>>>>>>> host localhost
>>>>>>> user weewx
>>>>>>> password weewx
>>>>>>>
>>>>>>> --- Start configuration file /etc/weewx/weewx.conf ---
>>>>>>> # WEEWX CONFIGURATION FILE
>>>>>>> #
>>>>>>> # Copyright (c) 2009-2024 Tom Keffer
>>>>>>> # See the file LICENSE.txt for your rights.
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section is for general configuration information.
>>>>>>>
>>>>>>> # Set to 1 for extra debug info, otherwise comment it out or set to
>>>>>>> zero.
>>>>>>> debug = 1
>>>>>>>
>>>>>>> # Whether to log successful operations. May get overridden below.
>>>>>>> log_success = True
>>>>>>>
>>>>>>> # Whether to log unsuccessful operations. May get overridden below.
>>>>>>> log_failure = True
>>>>>>>
>>>>>>> # This configuration file was created by ...
>>>>>>> version = 5.1.0
>>>>>>> config_path = /etc/weewx/weewx.conf
>>>>>>> WEEWX_ROOT = /etc/weewx
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section is for information about the station.
>>>>>>>
>>>>>>> [Station]
>>>>>>>
>>>>>>> # Description of the station location, such as your town.
>>>>>>> location = "Savannah, GA"
>>>>>>>
>>>>>>> # Latitude in decimal degrees. Negative for southern hemisphere.
>>>>>>> latitude = 31.919095
>>>>>>> # Longitude in decimal degrees. Negative for western hemisphere.
>>>>>>> longitude = -81.075874
>>>>>>>
>>>>>>> # Altitude of the station, with the unit it is in. This is used
>>>>>>> only
>>>>>>> # if the hardware cannot supply a value.
>>>>>>> altitude = 14, foot # Choose 'foot' or 'meter' for unit
>>>>>>>
>>>>>>> # Set to type of station hardware. There must be a corresponding
>>>>>>> stanza
>>>>>>> # in this file, which includes a value for the 'driver' option.
>>>>>>> station_type = Vantage
>>>>>>>
>>>>>>> # If you have a website, you may specify an URL
>>>>>>> station_url = XXXXXX
>>>>>>>
>>>>>>> # The start of the rain year (1=January; 10=October, etc.). This
>>>>>>> is
>>>>>>> # downloaded from the station if the hardware supports it.
>>>>>>> rain_year_start = 1
>>>>>>>
>>>>>>> # Start of week (0=Monday, 6=Sunday)
>>>>>>> week_start = 0
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> [Vantage]
>>>>>>> # This section is for the Davis Vantage series of weather
>>>>>>> stations.
>>>>>>>
>>>>>>> # Connection type: serial or ethernet
>>>>>>> # serial (the classic VantagePro)
>>>>>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>>>>>>> type = serial
>>>>>>>
>>>>>>> # If the connection type is serial, a port must be specified:
>>>>>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>>>>>>> # /dev/ttyUSB0 is a common USB port name
>>>>>>> # /dev/ttyS0 is a common serial port name
>>>>>>> # BSD:
>>>>>>> # /dev/cuaU0 is a common serial port name
>>>>>>> port = /dev/ttyUSB0
>>>>>>>
>>>>>>> # If the connection type is ethernet, an IP Address/hostname is
>>>>>>> required:
>>>>>>> host = 1.2.3.4
>>>>>>>
>>>>>>> ######################################################
>>>>>>> # The rest of this section rarely needs any attention.
>>>>>>> # You can safely leave it "as is."
>>>>>>> ######################################################
>>>>>>>
>>>>>>> # Serial baud rate (usually 19200)
>>>>>>> baudrate = 19200
>>>>>>>
>>>>>>> # TCP port (when using the WeatherLinkIP)
>>>>>>> tcp_port = 22222
>>>>>>>
>>>>>>> # TCP send delay (when using the WeatherLinkIP):
>>>>>>> tcp_send_delay = 0.5
>>>>>>>
>>>>>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 =
>>>>>>> both
>>>>>>> loop_request = 1
>>>>>>>
>>>>>>> # The id of your ISS station (usually 1). If you use a wind
>>>>>>> meter connected
>>>>>>> # to a anemometer transmitter kit, use its id
>>>>>>> iss_id = 1
>>>>>>>
>>>>>>> # How long to wait for a response from the station before giving
>>>>>>> up (in
>>>>>>> # seconds; must be greater than 2)
>>>>>>> timeout = 4
>>>>>>>
>>>>>>> # How long to wait before trying again (in seconds)
>>>>>>> wait_before_retry = 1.2
>>>>>>>
>>>>>>> # How many times to try before giving up:
>>>>>>> max_tries = 4
>>>>>>>
>>>>>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>>>>>>> model_type = 2
>>>>>>>
>>>>>>> # The driver to use:
>>>>>>> driver = weewx.drivers.vantage
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> [Simulator]
>>>>>>> # This section is for the weewx weather station simulator.
>>>>>>>
>>>>>>> # The time (in seconds) between LOOP packets.
>>>>>>> loop_interval = 2.5
>>>>>>>
>>>>>>> # The simulator mode can be either 'simulator' or 'generator'.
>>>>>>> # Real-time simulator. Sleep between each LOOP packet.
>>>>>>> mode = simulator
>>>>>>> # Generator. Emit LOOP packets as fast as possible (useful for
>>>>>>> testing).
>>>>>>> #mode = generator
>>>>>>>
>>>>>>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified,
>>>>>>> the
>>>>>>> # default is to use the present time.
>>>>>>> #start = 2011-01-01T00:00
>>>>>>>
>>>>>>> # The driver to use.
>>>>>>> driver = weewx.drivers.simulator
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section is for uploading data to Internet sites
>>>>>>>
>>>>>>> [StdRESTful]
>>>>>>>
>>>>>>> # Uncomment and change to override logging for uploading
>>>>>>> services.
>>>>>>> # log_success = True
>>>>>>> # log_failure = True
>>>>>>>
>>>>>>> [[StationRegistry]]
>>>>>>> # To register this weather station at weewx.com, set this
>>>>>>> to true, and
>>>>>>> # set option 'station_url', located in the [Station] section
>>>>>>> above.
>>>>>>> register_this_station = True
>>>>>>>
>>>>>>> [[AWEKAS]]
>>>>>>> # This section is for configuring posts to AWEKAS.
>>>>>>>
>>>>>>> # If you wish to post to AWEKAS, set the option 'enable' to
>>>>>>> true, then
>>>>>>> # specify a username and password.
>>>>>>> # Use quotes around the password to guard against parsing
>>>>>>> errors.
>>>>>>> enable = false
>>>>>>> username = XXXXXX
>>>>>>> password = XXXXXX
>>>>>>>
>>>>>>> [[CWOP]]
>>>>>>> # This section is for configuring posts to CWOP.
>>>>>>>
>>>>>>> # If you wish to post to CWOP, set the option 'enable' to
>>>>>>> true,
>>>>>>> # then specify the station ID (e.g., CW1234).
>>>>>>> enable = false
>>>>>>> station = XXXXXX
>>>>>>> # If this is an APRS (radio amateur) station, specify the
>>>>>>> # passcode (e.g., 12345). Otherwise, ignore.
>>>>>>> passcode = XXXXXX
>>>>>>>
>>>>>>> [[PWSweather]]
>>>>>>> # This section is for configuring posts to PWSweather.com.
>>>>>>>
>>>>>>> # If you wish to post to PWSweather.com, set the option
>>>>>>> 'enable' to
>>>>>>> # true, then specify a station and password.
>>>>>>> # Use quotes around the password to guard against parsing
>>>>>>> errors.
>>>>>>> enable = false
>>>>>>> station = XXXXXX
>>>>>>> password = XXXXXX
>>>>>>>
>>>>>>> [[WOW]]
>>>>>>> # This section is for configuring posts to WOW.
>>>>>>>
>>>>>>> # If you wish to post to WOW, set the option 'enable' to
>>>>>>> true, then
>>>>>>> # specify a station and password.
>>>>>>> # Use quotes around the password to guard against parsing
>>>>>>> errors.
>>>>>>> enable = false
>>>>>>> station = XXXXXX
>>>>>>> password = XXXXXX
>>>>>>>
>>>>>>> [[Wunderground]]
>>>>>>> # This section is for configuring posts to the Weather
>>>>>>> Underground.
>>>>>>>
>>>>>>> # If you wish to post to the Weather Underground, set the
>>>>>>> option
>>>>>>> # 'enable' to true, then specify a station (e.g.,
>>>>>>> 'KORHOODR3'). Use
>>>>>>> # the station key (find it at
>>>>>>> # https://www.wunderground.com/member/devices) for the
>>>>>>> password.
>>>>>>> enable = false
>>>>>>> station = XXXXXX
>>>>>>> password = XXXXXX
>>>>>>>
>>>>>>> # Set the following to True to have weewx use the WU
>>>>>>> "Rapidfire"
>>>>>>> # protocol. Not all hardware can support it. See the User's
>>>>>>> Guide.
>>>>>>> rapidfire = False
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section specifies what reports, using which skins, to
>>>>>>> generate.
>>>>>>>
>>>>>>> [StdReport]
>>>>>>>
>>>>>>> # Where the skins reside, relative to WEEWX_ROOT
>>>>>>> SKIN_ROOT = skins
>>>>>>>
>>>>>>> # Where the generated reports should go, relative to WEEWX_ROOT
>>>>>>> HTML_ROOT = /var/www/html/weewx
>>>>>>>
>>>>>>> # Uncomment and change to override logging for reports.
>>>>>>> # log_success = True
>>>>>>> # log_failure = True
>>>>>>>
>>>>>>> # The database binding indicates which data should be used in
>>>>>>> reports.
>>>>>>> data_binding = wx_binding
>>>>>>>
>>>>>>> # Each of the following subsections defines a report that will
>>>>>>> be run.
>>>>>>> # See the customizing guide to change the units, plot types and
>>>>>>> line
>>>>>>> # colors, modify the fonts, display additional sensor data, and
>>>>>>> other
>>>>>>> # customizations. Many of those changes can be made here by
>>>>>>> overriding
>>>>>>> # parameters, or by modifying templates within the skin itself.
>>>>>>>
>>>>>>> [[SeasonsReport]]
>>>>>>> # The SeasonsReport uses the 'Seasons' skin, which contains
>>>>>>> the
>>>>>>> # images, templates and plots for the report.
>>>>>>> skin = Seasons
>>>>>>> enable = true
>>>>>>>
>>>>>>> [[SmartphoneReport]]
>>>>>>> # The SmartphoneReport uses the 'Smartphone' skin, and the
>>>>>>> images and
>>>>>>> # files are placed in a dedicated subdirectory.
>>>>>>> skin = Smartphone
>>>>>>> enable = false
>>>>>>> HTML_ROOT = /var/www/html/weewx/smartphone
>>>>>>>
>>>>>>> [[MobileReport]]
>>>>>>> # The MobileReport uses the 'Mobile' skin, and the images
>>>>>>> and files
>>>>>>> # are placed in a dedicated subdirectory.
>>>>>>> skin = Mobile
>>>>>>> enable = false
>>>>>>> HTML_ROOT = /var/www/html/weewx/mobile
>>>>>>>
>>>>>>> [[StandardReport]]
>>>>>>> # This is the old "Standard" skin. By default, it is not
>>>>>>> enabled.
>>>>>>> skin = Standard
>>>>>>> enable = false
>>>>>>>
>>>>>>> [[FTP]]
>>>>>>> # FTP'ing the results to a webserver is treated as just
>>>>>>> another report,
>>>>>>> # albeit one with an unusual report generator!
>>>>>>> skin = Ftp
>>>>>>>
>>>>>>> # If you wish to use FTP, set "enable" to "true", then fill
>>>>>>> out the
>>>>>>> # next four lines.
>>>>>>> # Use quotes around the password to guard against parsing
>>>>>>> errors.
>>>>>>> enable = false
>>>>>>> user = XXXXXX
>>>>>>> password = XXXXXX
>>>>>>> server = XXXXXX # The ftp server name, e.g,
>>>>>>> www.myserver.org
>>>>>>> path = replace_me # The destination directory, e.g.,
>>>>>>> /weather
>>>>>>>
>>>>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all
>>>>>>> servers
>>>>>>> # support this.
>>>>>>> secure_ftp = False
>>>>>>>
>>>>>>> # To upload files from something other than what HTML_ROOT
>>>>>>> is set
>>>>>>> # to above, specify a different HTML_ROOT here.
>>>>>>> #HTML_ROOT = /var/www/html/weewx
>>>>>>>
>>>>>>> # Most FTP servers use port 21.
>>>>>>> port = 21
>>>>>>>
>>>>>>> # Set to 1 to use passive mode, zero for active mode
>>>>>>> passive = 1
>>>>>>>
>>>>>>> [[RSYNC]]
>>>>>>> # rsync'ing to a webserver is treated as just another report.
>>>>>>> skin = Rsync
>>>>>>>
>>>>>>> # If you wish to use rsync, you must configure passwordless
>>>>>>> ssh using
>>>>>>> # public/private key authentication from the user account
>>>>>>> that weewx
>>>>>>> # runs to the user account on the remote machine where the
>>>>>>> files
>>>>>>> # will be copied.
>>>>>>> #
>>>>>>> # If you wish to use rsync, set "enable" to "true", then
>>>>>>> # fill out server, user, and path.
>>>>>>> # The server should appear in your .ssh/config file.
>>>>>>> # The user is the username used in the identity file.
>>>>>>> # The path is the destination directory, such as
>>>>>>> /var/www/html/weather.
>>>>>>> # Be sure that the user has write permissions on the
>>>>>>> destination!
>>>>>>> enable = false
>>>>>>> server = XXXXXX
>>>>>>> user = XXXXXX
>>>>>>> path = replace_me
>>>>>>>
>>>>>>> # To upload files from something other than what HTML_ROOT
>>>>>>> is set
>>>>>>> # to above, specify a different HTML_ROOT here.
>>>>>>> #HTML_ROOT = /var/www/html/weewx
>>>>>>>
>>>>>>> # Rsync can be configured to remove files from the remote
>>>>>>> server if
>>>>>>> # they don't exist under HTML_ROOT locally. USE WITH
>>>>>>> CAUTION: if you
>>>>>>> # make a mistake in the remote path, you could could
>>>>>>> unintentionally
>>>>>>> # cause unrelated files to be deleted. Set to 1 to enable
>>>>>>> remote file
>>>>>>> # deletion, zero to allow files to accumulate remotely.
>>>>>>> delete = 0
>>>>>>>
>>>>>>> # Options in the [[Defaults]] section below will apply to all
>>>>>>> reports.
>>>>>>> # What follows are a few of the more popular options you may
>>>>>>> want to
>>>>>>> # uncomment, then change.
>>>>>>> [[Defaults]]
>>>>>>>
>>>>>>> # Which language to use for all reports. Not all skins
>>>>>>> support all
>>>>>>> # languages. You can override this for individual reports.
>>>>>>> lang = en
>>>>>>>
>>>>>>> # Which unit system to use for all reports. Choices are
>>>>>>> 'us', 'metric',
>>>>>>> # or 'metricwx'. You can override this for individual
>>>>>>> reports.
>>>>>>> unit_system = us
>>>>>>>
>>>>>>> [[[Units]]]
>>>>>>>
>>>>>>> # Option "unit_system" above sets the general unit
>>>>>>> system, but
>>>>>>> # overriding specific unit groups is possible. These are
>>>>>>> popular
>>>>>>> # choices. Uncomment and set as appropriate. The unit
>>>>>>> is always
>>>>>>> # in the singular, e.g., 'mile_per_hour', NOT
>>>>>>> 'miles_per_hour'
>>>>>>> [[[[Groups]]]]
>>>>>>> # group_altitude = meter # Options
>>>>>>> are 'foot' or 'meter'
>>>>>>> # group_pressure = mbar # Options
>>>>>>> are 'inHg', 'mmHg', 'mbar', or 'hPa'
>>>>>>> # group_rain = mm # Options
>>>>>>> are 'inch', 'cm', or 'mm'
>>>>>>> # group_rainrate = mm_per_hour # Options
>>>>>>> are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>>>>>>> # group_temperature = degree_C # Options
>>>>>>> are 'degree_C', 'degree_F', or 'degree_K'
>>>>>>> # The following line is used to keep the above lines
>>>>>>> indented
>>>>>>> # properly. It can be ignored.
>>>>>>> unused = unused
>>>>>>>
>>>>>>> # Uncommenting the following section frequently results
>>>>>>> in more
>>>>>>> # attractive formatting of times and dates, but may not
>>>>>>> work in
>>>>>>> # your locale.
>>>>>>> [[[[TimeFormats]]]]
>>>>>>> # day = %H:%M
>>>>>>> # week = %H:%M on %A
>>>>>>> # month = %d-%b-%Y %H:%M
>>>>>>> # year = %d-%b-%Y %H:%M
>>>>>>> # rainyear = %d-%b-%Y %H:%M
>>>>>>> # current = %d-%b-%Y %H:%M
>>>>>>> # ephem_day = %H:%M
>>>>>>> # ephem_year = %d-%b-%Y %H:%M
>>>>>>> # The following line is used to keep the above lines
>>>>>>> indented
>>>>>>> # properly. It can be ignored.
>>>>>>> unused = unused
>>>>>>>
>>>>>>> [[[Labels]]]
>>>>>>> # Users frequently change the labels for these
>>>>>>> observation types.
>>>>>>> [[[[Generic]]]]
>>>>>>> # inHumidity = Inside Humidity
>>>>>>> # inTemp = Inside Temperature
>>>>>>> # outHumidity = Outside Humidity
>>>>>>> # outTemp = Outside Temperature
>>>>>>> # extraTemp1 = Temperature1
>>>>>>> # extraTemp2 = Temperature2
>>>>>>> # extraTemp3 = Temperature3
>>>>>>> # The following line is used to keep the above lines
>>>>>>> indented
>>>>>>> # properly. It can be ignored.
>>>>>>> unused = unused
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This service converts the unit system coming from the hardware
>>>>>>> to a unit
>>>>>>> # system in the database.
>>>>>>>
>>>>>>> [StdConvert]
>>>>>>>
>>>>>>> # The target_unit affects only the unit system in the database.
>>>>>>> Once
>>>>>>> # chosen it cannot be changed without converting the entire
>>>>>>> database.
>>>>>>> # Modification of target_unit after starting weewx will result in
>>>>>>> # corrupt data - the database will contain a mix of US and
>>>>>>> METRIC data.
>>>>>>> #
>>>>>>> # The value of target_unit does not affect the unit system for
>>>>>>> # reporting - reports can display US, Metric, or any combination
>>>>>>> of units.
>>>>>>> #
>>>>>>> # In most cases, target_unit should be left as the default: US
>>>>>>> #
>>>>>>> # In particular, those migrating from a standard wview
>>>>>>> installation
>>>>>>> # should use US since that is what the wview database contains.
>>>>>>>
>>>>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
>>>>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section can adjust data using calibration expressions.
>>>>>>>
>>>>>>> [StdCalibrate]
>>>>>>>
>>>>>>> [[Corrections]]
>>>>>>> # For each type, an arbitrary calibration expression can be
>>>>>>> given.
>>>>>>> # It should be in the units defined in the StdConvert
>>>>>>> section.
>>>>>>> # Example:
>>>>>>> foo = foo + 0.2
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section is for quality control checks. If units are not
>>>>>>> specified,
>>>>>>> # values must be in the units defined in the StdConvert section.
>>>>>>>
>>>>>>> [StdQC]
>>>>>>>
>>>>>>> [[MinMax]]
>>>>>>> barometer = 26, 32.5, inHg
>>>>>>> pressure = 24, 34.5, inHg
>>>>>>> outTemp = -40, 120, degree_F
>>>>>>> inTemp = 10, 120, degree_F
>>>>>>> outHumidity = 0, 100
>>>>>>> inHumidity = 0, 100
>>>>>>> windSpeed = 0, 120, mile_per_hour
>>>>>>> rain = 0, 10, inch
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section controls the origin of derived values.
>>>>>>>
>>>>>>> [StdWXCalculate]
>>>>>>>
>>>>>>> [[Calculations]]
>>>>>>> # How to calculate derived quantities. Possible values are:
>>>>>>> # hardware - use the value provided by hardware
>>>>>>> # software - use the value calculated by weewx
>>>>>>> # prefer_hardware - use value provide by hardware if
>>>>>>> available,
>>>>>>> # otherwise use value calculated by
>>>>>>> weewx
>>>>>>>
>>>>>>> pressure = prefer_hardware
>>>>>>> altimeter = prefer_hardware
>>>>>>> appTemp = prefer_hardware
>>>>>>> barometer = prefer_hardware
>>>>>>> cloudbase = prefer_hardware
>>>>>>> dewpoint = prefer_hardware
>>>>>>> ET = prefer_hardware
>>>>>>> heatindex = prefer_hardware
>>>>>>> humidex = prefer_hardware
>>>>>>> inDewpoint = prefer_hardware
>>>>>>> maxSolarRad = prefer_hardware
>>>>>>> rainRate = prefer_hardware
>>>>>>> windchill = prefer_hardware
>>>>>>> windrun = prefer_hardware
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # For hardware that supports it, this section controls how often
>>>>>>> the
>>>>>>> # onboard clock gets updated.
>>>>>>>
>>>>>>> [StdTimeSynch]
>>>>>>>
>>>>>>> # How often to check the weather station clock for drift (in
>>>>>>> seconds)
>>>>>>> clock_check = 14400
>>>>>>>
>>>>>>> # How much it can drift before we will correct it (in seconds)
>>>>>>> max_drift = 5
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section is for configuring the archive service.
>>>>>>>
>>>>>>> [StdArchive]
>>>>>>>
>>>>>>> # If the station hardware supports data logging then the archive
>>>>>>> interval
>>>>>>> # will be downloaded from the station. Otherwise, specify it (in
>>>>>>> seconds).
>>>>>>> archive_interval = 300
>>>>>>>
>>>>>>> # If possible, new archive records are downloaded from the
>>>>>>> station
>>>>>>> # hardware. If the hardware does not support this, then new
>>>>>>> archive
>>>>>>> # records will be generated in software.
>>>>>>> # Set the following to "software" to force software record
>>>>>>> generation.
>>>>>>> record_generation = hardware
>>>>>>>
>>>>>>> # Whether to include LOOP data in hi/low statistics.
>>>>>>> loop_hilo = True
>>>>>>>
>>>>>>> # Uncomment and change to override logging for archive
>>>>>>> operations.
>>>>>>> # log_success = True
>>>>>>> # log_failure = True
>>>>>>>
>>>>>>> # The data binding used to save archive records.
>>>>>>> data_binding = wx_binding
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section binds a data store to a database.
>>>>>>>
>>>>>>> [DataBindings]
>>>>>>>
>>>>>>> [[wx_binding]]
>>>>>>> # The database must match one of the sections in [Databases].
>>>>>>> # This is likely to be the only option you would want to
>>>>>>> change.
>>>>>>> database = archive_sqlite
>>>>>>> # The name of the table within the database.
>>>>>>> table_name = archive
>>>>>>> # The manager handles aggregation of data for historical
>>>>>>> summaries.
>>>>>>> manager = weewx.manager.DaySummaryManager
>>>>>>> # The schema defines the structure of the database.
>>>>>>> # It is *only* used when the database is created.
>>>>>>> schema = schemas.wview_extended.schema
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section defines various databases.
>>>>>>>
>>>>>>> [Databases]
>>>>>>>
>>>>>>> # A SQLite database is simply a single file.
>>>>>>> [[archive_sqlite]]
>>>>>>> database_name = weewx.sdb
>>>>>>> database_type = SQLite
>>>>>>>
>>>>>>> # MySQL
>>>>>>> [[archive_mysql]]
>>>>>>> database_name = weewx
>>>>>>> database_type = MySQL
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section defines defaults for the different types of
>>>>>>> databases.
>>>>>>>
>>>>>>> [DatabaseTypes]
>>>>>>>
>>>>>>> # Defaults for SQLite databases.
>>>>>>> [[SQLite]]
>>>>>>> driver = weedb.sqlite
>>>>>>> # Directory in which database files are located, relative to
>>>>>>> WEEWX_ROOT
>>>>>>> SQLITE_ROOT = /var/lib/weewx
>>>>>>>
>>>>>>> # Defaults for MySQL databases.
>>>>>>> [[MySQL]]
>>>>>>> driver = weedb.mysql
>>>>>>> # The host where the database is located.
>>>>>>> host = localhost
>>>>>>> # The user name for logging in to the host.
>>>>>>> user = XXXXXX
>>>>>>> # Use quotes around the password to guard against parsing
>>>>>>> errors.
>>>>>>> password = XXXXXX
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> # This section configures the internal weewx engine.
>>>>>>>
>>>>>>> [Engine]
>>>>>>>
>>>>>>> # This section specifies which services should be run and in
>>>>>>> what order.
>>>>>>> [[Services]]
>>>>>>> prep_services = weewx.engine.StdTimeSynch
>>>>>>> data_services = ,
>>>>>>> process_services = weewx.engine.StdConvert,
>>>>>>> weewx.engine.StdCalibrate, weewx.engine.StdQC,
>>>>>>> weewx.wxservices.StdWXCalculate
>>>>>>> xtype_services = weewx.wxxtypes.StdWXXTypes,
>>>>>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
>>>>>>> weewx.wxxtypes.StdDelta
>>>>>>> archive_services = weewx.engine.StdArchive
>>>>>>> restful_services = weewx.restx.StdStationRegistry,
>>>>>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
>>>>>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>>>>>>> report_services = weewx.engine.StdPrint,
>>>>>>> weewx.engine.StdReport
>>>>>>> scott@spi-1:~ $
>>>>>>>
>>>>>>>
>>>>>>> On Sunday, February 2, 2025 at 3:01:39 PM UTC-5 scott pierce wrote:
>>>>>>>
>>>>>>>> Yes, big rookie mistake. Working through it now. Thanks for
>>>>>>>> pointing out!!
>>>>>>>> Scott
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sunday, February 2, 2025 at 2:37:45 PM UTC-5 michael.k...@gmx.at
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Maybe you missed that you refer to a 4.9 version of the docs, but
>>>>>>>>> you've installed a 5.1 version?
>>>>>>>>>
>>>>>>>>> https://weewx.com/docs/5.1/usersguide/where/?h=find#where-to-find-things
>>>>>>>>>
>>>>>>>>> scott pierce schrieb am Sonntag, 2. Februar 2025 um 20:33:42 UTC+1:
>>>>>>>>>
>>>>>>>>>> *Also....where are the executables? In the documentation it
>>>>>>>>>> says:*
>>>>>>>>>>
>>>>>>>>>> This is a reference guide to the executable utilities that come
>>>>>>>>>> with WeeWX:
>>>>>>>>>>
>>>>>>>>>> - wee_config
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_config_utility> for
>>>>>>>>>> changing the configuration file, and configuring new device
>>>>>>>>>> drivers;
>>>>>>>>>> - wee_database
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_database_utility>
>>>>>>>>>> for
>>>>>>>>>> reconfiguring the database;
>>>>>>>>>> - wee_debug
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_debug_utility> for
>>>>>>>>>> producing debug reports for remote support;
>>>>>>>>>> - wee_device
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_device_utility> for
>>>>>>>>>> configuring your hardware;
>>>>>>>>>> - wee_extension
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_extension_utility>
>>>>>>>>>> for
>>>>>>>>>> installing and removing extensions;
>>>>>>>>>> - wee_import
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_import_utility> for
>>>>>>>>>> importing historical data from external sources;
>>>>>>>>>> - wee_reports
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_reports_utility>
>>>>>>>>>> for
>>>>>>>>>> running reports without running WeeWX itself;
>>>>>>>>>> - weewxd <https://weewx.com/docs/4.9/utilities.htm#weewxd> the
>>>>>>>>>> main weewx program;
>>>>>>>>>> - wunderfixer
>>>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wunderfixer_utility>
>>>>>>>>>> for
>>>>>>>>>> resending data missing on the Weather Underground site.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *And then to find them....*
>>>>>>>>>>
>>>>>>>>>> Location of WeeWX components¶
>>>>>>>>>> <https://weewx.com/docs/5.0/usersguide/where/#location-of-weewx-components>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Executables*BIN_ROOT*/usr/share/weewx/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *But when I look in that directory....*
>>>>>>>>>>
>>>>>>>>>> @spi-1:/usr/share/weewx $ ls
>>>>>>>>>> __pycache__ weecfg weectl.py weeimport weeutil weewx_data
>>>>>>>>>> schemas weectllib weedb weeplot weewx weewxd.py
>>>>>>>>>> @spi-1:/usr/share/weewx $
>>>>>>>>>>
>>>>>>>>>> *None of them show up. What am I missing?*
>>>>>>>>>>
>>>>>>>>>> *Thanks*
>>>>>>>>>> *Scott*
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Sunday, February 2, 2025 at 12:03:03 PM UTC-5 scott pierce
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>> I was able to update the confi file and change the Debug to
>>>>>>>>>>> 1...which in itself is a huge win as it took me a while to figure
>>>>>>>>>>> out how
>>>>>>>>>>> to even access the file. (permissions have been a bear to learn).
>>>>>>>>>>> I have
>>>>>>>>>>> read a lot in the last 24 hours!
>>>>>>>>>>> That said, I still don't know how to access any additional log
>>>>>>>>>>> information. When I run the status check, it comes back with
>>>>>>>>>>> basically the
>>>>>>>>>>> same info...
>>>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>>>>> preset: enabled)
>>>>>>>>>>> Active: failed (Result: exit-code) since Sun 2025-02-02
>>>>>>>>>>> 11:35:11 EST; 23min ago
>>>>>>>>>>> Duration: 18min 49.054s
>>>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>>>> Process: 1261 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>>>> (code=exited, status=4)
>>>>>>>>>>> Main PID: 1261 (code=exited, status=4)
>>>>>>>>>>> CPU: 873ms
>>>>>>>>>>>
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line
>>>>>>>>>>> 1444, in
>>>>>>>>>>> _setup
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>>> **** self.hardware_type = self._determine_hardware()
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line
>>>>>>>>>>> 1435, in
>>>>>>>>>>> _determine_hardware
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>>> **** raise weewx.WeeWxIOError("Unable to read hardware type")
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>>>> **** weewx.WeeWxIOError: Unable to read hardware type
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: Unable to
>>>>>>>>>>> load driver: Unable to read hardware type
>>>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: ****
>>>>>>>>>>> Exiting...
>>>>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>>>> result 'exit-code'.
>>>>>>>>>>> ~
>>>>>>>>>>>
>>>>>>>>>>> Thanks
>>>>>>>>>>> Scott
>>>>>>>>>>> On Saturday, February 1, 2025 at 10:51:51 PM UTC-5 John Kline
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> If you set debug = 1 and restart weewx, we’ll get to see the
>>>>>>>>>>>> hardware_type read from the envoy.
>>>>>>>>>>>> The line in the log will contain “Hardware type is “
>>>>>>>>>>>>
>>>>>>>>>>>> On Feb 1, 2025, at 6:34 PM, scott pierce <johnsco...@gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Successfully installed WeeWX on Rpi 5 and it's ingesting data
>>>>>>>>>>>> from Davis Envoy USB Weather Link data logger.
>>>>>>>>>>>>
>>>>>>>>>>>> Also, I have been able to view reports...so that's nice.
>>>>>>>>>>>> I'm just beginning this journey so still a lot to learn and set
>>>>>>>>>>>> up.
>>>>>>>>>>>> One quick question I can't find an answer to in the group or in
>>>>>>>>>>>> notes...
>>>>>>>>>>>> when I run a status check this is the result...
>>>>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service;
>>>>>>>>>>>> enabled; preset: enabled)
>>>>>>>>>>>> Active: failed (Result: exit-code) since Sat 2025-02-01
>>>>>>>>>>>> 21:18:12 EST; 7min ago
>>>>>>>>>>>> Duration: 35min 33.415s
>>>>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>>>>> Process: 6313 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>>>>> (code=exited, status=4)
>>>>>>>>>>>> Main PID: 6313 (code=exited, status=4)
>>>>>>>>>>>> CPU: 2.339s
>>>>>>>>>>>>
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>>> **** log.debug("Hardware name: %s", self.hardware_name)
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line
>>>>>>>>>>>> 1416, in
>>>>>>>>>>>> hardware_name
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>>> **** raise weewx.UnsupportedFeature("Unknown hardware type
>>>>>>>>>>>> %d" %
>>>>>>>>>>>> self.hardware_type)
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>>>> **** weewx.UnsupportedFeature: Unknown hardware type 10
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: Unable
>>>>>>>>>>>> to load driver: Unknown hardware type 10
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: ****
>>>>>>>>>>>> Exiting...
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>>>>> result 'exit-code'.
>>>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Consumed
>>>>>>>>>>>> 2.339s CPU time.
>>>>>>>>>>>>
>>>>>>>>>>>> I'm guessing I put the hardware name in wrong in setup...not
>>>>>>>>>>>> sure. Also don't know where to look to check.
>>>>>>>>>>>> Any suggestions are appreciated.
>>>>>>>>>>>> Thanks
>>>>>>>>>>>> Scott
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>>>> To view this discussion visit
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com
>>>>>>>>>>>>
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/fe077d27-d42d-426a-8bad-7f8823c9f850n%40googlegroups.com.
