Ran the journal log and it produced this:
Feb 01 16:48:38 scott systemd[1]: Started weewx.service - WeeWX.
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Initializing weewxd
version 5.1.0
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Command line:
/usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Using Python: 3.11.2
(main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Located at:
/usr/bin/python3
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Platform:
Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Locale:
'en_US.UTF-8'
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Entry path:
/usr/share/weewx/weewxd.py
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: WEEWX_ROOT: /etc/weewx
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Config file:
/etc/weewx/weewx.conf
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User module:
/etc/weewx/bin/user
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Debug: 0
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User: weewx
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Group: weewx
Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Groups: weewx
Feb 01 16:48:38 scott weewxd[3395]: INFO weewx.engine: Loading station type
Vantage (weewx.drivers.vantage)
Feb 01 16:48:38 scott weewxd[3395]: ERROR weewx.engine: Import of driver
failed: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
or directory: '/dev/ttyUSB0' (<class 'serial.serialutil.SerialException'>)
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
Traceback (most recent call last):
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 322, in open
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
FileNotFoundError: [Errno 2] No such file or directory: '/dev/ttyUSB0'
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** During
handling of the above exception, another exception occurred:
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
Traceback (most recent call last):
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/engine.py", line 115, in setupStation
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
self.console = loader_function(config_dict, self)
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/drivers/vantage.py", line 32, in loader
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
return VantageService(engine, config_dict)
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/drivers/vantage.py", line 2046, in __init__
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
Vantage.__init__(self, **config_dict[DRIVER_NAME])
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/drivers/vantage.py", line 536, in __init__
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
self.port.openPort()
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/share/weewx/weewx/drivers/vantage.py", line 319, in openPort
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
self.serial_port = serial.Serial(self.port, self.baudrate,
timeout=self.timeout)
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialutil.py", line 244, in __init__
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
self.open()
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/serial/serialposix.py", line 325, in open
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
raise SerialException(msg.errno, "could not open port {}:
{}".format(self._port, msg))
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
serial.serialutil.SerialException: [Errno 2] could not open port
/dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: Unable to load
driver: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
or directory: '/dev/ttyUSB0'
Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: **** Exiting...
Feb 01 16:48:38 scott systemd[1]: weewx.service: Main process exited,
code=exited, status=4/NOPERMISSION
Feb 01 16:48:38 scott systemd[1]: weewx.service: Failed with result
'exit-code'.
Feb 01 20:26:36 spi-1 systemd[1]: Started weewx.service - WeeWX.
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Initializing weewxd
version 5.1.0
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Command line:
/usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Using Python: 3.11.2
(main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Located at:
/usr/bin/python3
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Platform:
Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Locale:
'en_US.UTF-8'
Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Entry path:
/usr/share/weewx/weewxd.py
lines 1-56
*To an uneducated brain, this looks like a problem with the driver for the
USB data logger from the Envoy. I have NO idea what port the USB is going
to on the Rpi so I just selected "the most common" option in the auto
install process. Could this be the issue?*
*Thanks*
*Scott*
On Sunday, February 2, 2025 at 6:22:56 PM UTC-5 scott pierce wrote:
> Here is what I have:
> scott@spi-1:~ $ groups
> scott adm dialout cdrom sudo audio video plugdev games users input render
> netdev lpadmin weewx gpio i2c spi
> scott@spi-1:~ $
>
> and
>
> scott@spi-1:~ $ groups weewx
> weewx : weewx
>
>
> On Sunday, February 2, 2025 at 4:10:06 PM UTC-5 vince wrote:
>
>> weewx.service: Main process exited, code=exited, status=4/NOPERMISSION
>> generally means the user running the command is not in the required unix
>> groups, which can be a little tricky to get right especially as a new linuc
>> user.
>>
>> Try ‘groups’ to see which groups your account is in, and ‘groups weewx’
>> to see which groups the weewx user is in. Your shell prompt is a bit
>> unusual so I can’t see which account you are using in your log excerpts.
>> On Sunday, February 2, 2025 at 12:15:45 PM UTC-8 scott pierce wrote:
>>
>>> *and here are the results when I run weectl device...still showing an
>>> unknown hardware issue:*
>>>
>>> @-1:~ $ weectl device
>>> Using configuration file /etc/weewx/weewx.conf
>>> Using driver weewx.drivers.vantage.
>>> Using Vantage driver version 3.6.2 (weewx.drivers.vantage)
>>> Unable to wake up console... sleeping
>>> Unable to wake up console... retrying
>>> Traceback (most recent call last):
>>> File "/usr/share/weewx/weectl.py", line 75, in <module>
>>> main()
>>> File "/usr/share/weewx/weectl.py", line 42, in main
>>> weectllib.device_actions.device()
>>> File "/usr/share/weewx/weectllib/device_actions.py", line 91, in device
>>> configurator.configure(config_dict)
>>> File "/usr/share/weewx/weewx/drivers/__init__.py", line 71, in
>>> configure
>>> self.do_options(options, parser, config_dict, not options.noprompt)
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2238, in
>>> do_options
>>> station = Vantage(**config_dict[DRIVER_NAME])
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 540, in __init__
>>>
>>> log.debug("Hardware name: %s", self.hardware_name)
>>> ^^^^^^^^^^^^^^^^^^
>>>
>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416, in
>>> hardware_name
>>> raise weewx.UnsupportedFeature("Unknown hardware type %d" %
>>> self.hardware_type)
>>> weewx.UnsupportedFeature: Unknown hardware type 10
>>> @1:~ $
>>>
>>> On Sunday, February 2, 2025 at 3:10:39 PM UTC-5 scott pierce wrote:
>>>
>>>> *Here is the info that came through after running weectl debug:*
>>>>
>>>> System info
>>>> Platform: Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>>>> Python Version: 3.11.2
>>>>
>>>> Load Information
>>>> 1 minute load average: 0.00
>>>> 5 minute load average: 0.04
>>>> 15 minute load average: 0.13
>>>>
>>>> General Weewx info
>>>> Weewx version 5.1.0 detected.
>>>>
>>>> Currently installed extensions
>>>> No extensions installed.
>>>>
>>>> Archive info
>>>> Database name: weewx.sdb
>>>> Table name: archive
>>>> Version 4.0
>>>> Unit system: 1 (US)
>>>> First good timestamp: 2025-01-30 14:50:00 EST (1738266600)
>>>> Last good timestamp: 2025-02-02 15:00:00 EST (1738526400)
>>>> Number of records: 434
>>>> weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>>>> The station hardware was not interrogated to determine the archive
>>>> interval.
>>>>
>>>> Supported SQL keys
>>>> dateTime usUnits interval
>>>>
>>>> altimeter appTemp appTemp1
>>>>
>>>> barometer batteryStatus1 batteryStatus2
>>>>
>>>> batteryStatus3 batteryStatus4 batteryStatus5
>>>>
>>>> batteryStatus6 batteryStatus7 batteryStatus8
>>>>
>>>> cloudbase co co2
>>>>
>>>> consBatteryVoltage dewpoint dewpoint1
>>>>
>>>> ET extraHumid1 extraHumid2
>>>>
>>>> extraHumid3 extraHumid4 extraHumid5
>>>>
>>>> extraHumid6 extraHumid7 extraHumid8
>>>>
>>>> extraTemp1 extraTemp2 extraTemp3
>>>>
>>>> extraTemp4 extraTemp5 extraTemp6
>>>>
>>>> extraTemp7 extraTemp8 forecast
>>>>
>>>> hail hailBatteryStatus hailRate
>>>>
>>>> heatindex heatindex1 heatingTemp
>>>>
>>>> heatingVoltage humidex humidex1
>>>>
>>>> inDewpoint inHumidity inTemp
>>>>
>>>> inTempBatteryStatus leafTemp1 leafTemp2
>>>>
>>>> leafWet1 leafWet2
>>>> lightning_distance
>>>> lightning_disturber_count lightning_energy
>>>> lightning_noise_count
>>>> lightning_strike_count luminosity maxSolarRad
>>>>
>>>> nh3 no2 noise
>>>>
>>>> o3 outHumidity outTemp
>>>>
>>>> outTempBatteryStatus pb pm10_0
>>>>
>>>> pm1_0 pm2_5 pressure
>>>>
>>>> radiation rain rainBatteryStatus
>>>>
>>>> rainRate referenceVoltage rxCheckPercent
>>>>
>>>> signal1 signal2 signal3
>>>>
>>>> signal4 signal5 signal6
>>>>
>>>> signal7 signal8 snow
>>>>
>>>> snowBatteryStatus snowDepth snowMoisture
>>>>
>>>> snowRate so2 soilMoist1
>>>>
>>>> soilMoist2 soilMoist3 soilMoist4
>>>>
>>>> soilTemp1 soilTemp2 soilTemp3
>>>>
>>>> soilTemp4 supplyVoltage txBatteryStatus
>>>>
>>>> UV uvBatteryStatus windBatteryStatus
>>>>
>>>> windchill windDir windGust
>>>>
>>>> windGustDir windrun windSpeed
>>>>
>>>>
>>>> Databases configured in weewx.conf:
>>>> archive_sqlite:
>>>> database_name weewx.sdb
>>>> driver weedb.sqlite
>>>> SQLITE_ROOT /var/lib/weewx
>>>> archive_mysql:
>>>> database_name weewx
>>>> driver weedb.mysql
>>>> host localhost
>>>> user weewx
>>>> password weewx
>>>>
>>>> --- Start configuration file /etc/weewx/weewx.conf ---
>>>> # WEEWX CONFIGURATION FILE
>>>> #
>>>> # Copyright (c) 2009-2024 Tom Keffer
>>>> # See the file LICENSE.txt for your rights.
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section is for general configuration information.
>>>>
>>>> # Set to 1 for extra debug info, otherwise comment it out or set to
>>>> zero.
>>>> debug = 1
>>>>
>>>> # Whether to log successful operations. May get overridden below.
>>>> log_success = True
>>>>
>>>> # Whether to log unsuccessful operations. May get overridden below.
>>>> log_failure = True
>>>>
>>>> # This configuration file was created by ...
>>>> version = 5.1.0
>>>> config_path = /etc/weewx/weewx.conf
>>>> WEEWX_ROOT = /etc/weewx
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section is for information about the station.
>>>>
>>>> [Station]
>>>>
>>>> # Description of the station location, such as your town.
>>>> location = "Savannah, GA"
>>>>
>>>> # Latitude in decimal degrees. Negative for southern hemisphere.
>>>> latitude = 31.919095
>>>> # Longitude in decimal degrees. Negative for western hemisphere.
>>>> longitude = -81.075874
>>>>
>>>> # Altitude of the station, with the unit it is in. This is used only
>>>> # if the hardware cannot supply a value.
>>>> altitude = 14, foot # Choose 'foot' or 'meter' for unit
>>>>
>>>> # Set to type of station hardware. There must be a corresponding
>>>> stanza
>>>> # in this file, which includes a value for the 'driver' option.
>>>> station_type = Vantage
>>>>
>>>> # If you have a website, you may specify an URL
>>>> station_url = XXXXXX
>>>>
>>>> # The start of the rain year (1=January; 10=October, etc.). This is
>>>> # downloaded from the station if the hardware supports it.
>>>> rain_year_start = 1
>>>>
>>>> # Start of week (0=Monday, 6=Sunday)
>>>> week_start = 0
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> [Vantage]
>>>> # This section is for the Davis Vantage series of weather stations.
>>>>
>>>> # Connection type: serial or ethernet
>>>> # serial (the classic VantagePro)
>>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>>>> type = serial
>>>>
>>>> # If the connection type is serial, a port must be specified:
>>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>>>> # /dev/ttyUSB0 is a common USB port name
>>>> # /dev/ttyS0 is a common serial port name
>>>> # BSD:
>>>> # /dev/cuaU0 is a common serial port name
>>>> port = /dev/ttyUSB0
>>>>
>>>> # If the connection type is ethernet, an IP Address/hostname is
>>>> required:
>>>> host = 1.2.3.4
>>>>
>>>> ######################################################
>>>> # The rest of this section rarely needs any attention.
>>>> # You can safely leave it "as is."
>>>> ######################################################
>>>>
>>>> # Serial baud rate (usually 19200)
>>>> baudrate = 19200
>>>>
>>>> # TCP port (when using the WeatherLinkIP)
>>>> tcp_port = 22222
>>>>
>>>> # TCP send delay (when using the WeatherLinkIP):
>>>> tcp_send_delay = 0.5
>>>>
>>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
>>>> loop_request = 1
>>>>
>>>> # The id of your ISS station (usually 1). If you use a wind meter
>>>> connected
>>>> # to a anemometer transmitter kit, use its id
>>>> iss_id = 1
>>>>
>>>> # How long to wait for a response from the station before giving up
>>>> (in
>>>> # seconds; must be greater than 2)
>>>> timeout = 4
>>>>
>>>> # How long to wait before trying again (in seconds)
>>>> wait_before_retry = 1.2
>>>>
>>>> # How many times to try before giving up:
>>>> max_tries = 4
>>>>
>>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>>>> model_type = 2
>>>>
>>>> # The driver to use:
>>>> driver = weewx.drivers.vantage
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> [Simulator]
>>>> # This section is for the weewx weather station simulator.
>>>>
>>>> # The time (in seconds) between LOOP packets.
>>>> loop_interval = 2.5
>>>>
>>>> # The simulator mode can be either 'simulator' or 'generator'.
>>>> # Real-time simulator. Sleep between each LOOP packet.
>>>> mode = simulator
>>>> # Generator. Emit LOOP packets as fast as possible (useful for
>>>> testing).
>>>> #mode = generator
>>>>
>>>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
>>>> # default is to use the present time.
>>>> #start = 2011-01-01T00:00
>>>>
>>>> # The driver to use.
>>>> driver = weewx.drivers.simulator
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section is for uploading data to Internet sites
>>>>
>>>> [StdRESTful]
>>>>
>>>> # Uncomment and change to override logging for uploading services.
>>>> # log_success = True
>>>> # log_failure = True
>>>>
>>>> [[StationRegistry]]
>>>> # To register this weather station at weewx.com, set this to
>>>> true, and
>>>> # set option 'station_url', located in the [Station] section
>>>> above.
>>>> register_this_station = True
>>>>
>>>> [[AWEKAS]]
>>>> # This section is for configuring posts to AWEKAS.
>>>>
>>>> # If you wish to post to AWEKAS, set the option 'enable' to
>>>> true, then
>>>> # specify a username and password.
>>>> # Use quotes around the password to guard against parsing
>>>> errors.
>>>> enable = false
>>>> username = XXXXXX
>>>> password = XXXXXX
>>>>
>>>> [[CWOP]]
>>>> # This section is for configuring posts to CWOP.
>>>>
>>>> # If you wish to post to CWOP, set the option 'enable' to true,
>>>> # then specify the station ID (e.g., CW1234).
>>>> enable = false
>>>> station = XXXXXX
>>>> # If this is an APRS (radio amateur) station, specify the
>>>> # passcode (e.g., 12345). Otherwise, ignore.
>>>> passcode = XXXXXX
>>>>
>>>> [[PWSweather]]
>>>> # This section is for configuring posts to PWSweather.com.
>>>>
>>>> # If you wish to post to PWSweather.com, set the option
>>>> 'enable' to
>>>> # true, then specify a station and password.
>>>> # Use quotes around the password to guard against parsing
>>>> errors.
>>>> enable = false
>>>> station = XXXXXX
>>>> password = XXXXXX
>>>>
>>>> [[WOW]]
>>>> # This section is for configuring posts to WOW.
>>>>
>>>> # If you wish to post to WOW, set the option 'enable' to true,
>>>> then
>>>> # specify a station and password.
>>>> # Use quotes around the password to guard against parsing
>>>> errors.
>>>> enable = false
>>>> station = XXXXXX
>>>> password = XXXXXX
>>>>
>>>> [[Wunderground]]
>>>> # This section is for configuring posts to the Weather
>>>> Underground.
>>>>
>>>> # If you wish to post to the Weather Underground, set the option
>>>> # 'enable' to true, then specify a station (e.g.,
>>>> 'KORHOODR3'). Use
>>>> # the station key (find it at
>>>> # https://www.wunderground.com/member/devices) for the
>>>> password.
>>>> enable = false
>>>> station = XXXXXX
>>>> password = XXXXXX
>>>>
>>>> # Set the following to True to have weewx use the WU "Rapidfire"
>>>> # protocol. Not all hardware can support it. See the User's
>>>> Guide.
>>>> rapidfire = False
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section specifies what reports, using which skins, to generate.
>>>>
>>>> [StdReport]
>>>>
>>>> # Where the skins reside, relative to WEEWX_ROOT
>>>> SKIN_ROOT = skins
>>>>
>>>> # Where the generated reports should go, relative to WEEWX_ROOT
>>>> HTML_ROOT = /var/www/html/weewx
>>>>
>>>> # Uncomment and change to override logging for reports.
>>>> # log_success = True
>>>> # log_failure = True
>>>>
>>>> # The database binding indicates which data should be used in
>>>> reports.
>>>> data_binding = wx_binding
>>>>
>>>> # Each of the following subsections defines a report that will be
>>>> run.
>>>> # See the customizing guide to change the units, plot types and line
>>>> # colors, modify the fonts, display additional sensor data, and
>>>> other
>>>> # customizations. Many of those changes can be made here by
>>>> overriding
>>>> # parameters, or by modifying templates within the skin itself.
>>>>
>>>> [[SeasonsReport]]
>>>> # The SeasonsReport uses the 'Seasons' skin, which contains the
>>>> # images, templates and plots for the report.
>>>> skin = Seasons
>>>> enable = true
>>>>
>>>> [[SmartphoneReport]]
>>>> # The SmartphoneReport uses the 'Smartphone' skin, and the
>>>> images and
>>>> # files are placed in a dedicated subdirectory.
>>>> skin = Smartphone
>>>> enable = false
>>>> HTML_ROOT = /var/www/html/weewx/smartphone
>>>>
>>>> [[MobileReport]]
>>>> # The MobileReport uses the 'Mobile' skin, and the images and
>>>> files
>>>> # are placed in a dedicated subdirectory.
>>>> skin = Mobile
>>>> enable = false
>>>> HTML_ROOT = /var/www/html/weewx/mobile
>>>>
>>>> [[StandardReport]]
>>>> # This is the old "Standard" skin. By default, it is not
>>>> enabled.
>>>> skin = Standard
>>>> enable = false
>>>>
>>>> [[FTP]]
>>>> # FTP'ing the results to a webserver is treated as just another
>>>> report,
>>>> # albeit one with an unusual report generator!
>>>> skin = Ftp
>>>>
>>>> # If you wish to use FTP, set "enable" to "true", then fill out
>>>> the
>>>> # next four lines.
>>>> # Use quotes around the password to guard against parsing
>>>> errors.
>>>> enable = false
>>>> user = XXXXXX
>>>> password = XXXXXX
>>>> server = XXXXXX # The ftp server name, e.g, www.myserver.org
>>>> path = replace_me # The destination directory, e.g., /weather
>>>>
>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all
>>>> servers
>>>> # support this.
>>>> secure_ftp = False
>>>>
>>>> # To upload files from something other than what HTML_ROOT is
>>>> set
>>>> # to above, specify a different HTML_ROOT here.
>>>> #HTML_ROOT = /var/www/html/weewx
>>>>
>>>> # Most FTP servers use port 21.
>>>> port = 21
>>>>
>>>> # Set to 1 to use passive mode, zero for active mode
>>>> passive = 1
>>>>
>>>> [[RSYNC]]
>>>> # rsync'ing to a webserver is treated as just another report.
>>>> skin = Rsync
>>>>
>>>> # If you wish to use rsync, you must configure passwordless ssh
>>>> using
>>>> # public/private key authentication from the user account that
>>>> weewx
>>>> # runs to the user account on the remote machine where the files
>>>> # will be copied.
>>>> #
>>>> # If you wish to use rsync, set "enable" to "true", then
>>>> # fill out server, user, and path.
>>>> # The server should appear in your .ssh/config file.
>>>> # The user is the username used in the identity file.
>>>> # The path is the destination directory, such as
>>>> /var/www/html/weather.
>>>> # Be sure that the user has write permissions on the
>>>> destination!
>>>> enable = false
>>>> server = XXXXXX
>>>> user = XXXXXX
>>>> path = replace_me
>>>>
>>>> # To upload files from something other than what HTML_ROOT is
>>>> set
>>>> # to above, specify a different HTML_ROOT here.
>>>> #HTML_ROOT = /var/www/html/weewx
>>>>
>>>> # Rsync can be configured to remove files from the remote
>>>> server if
>>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION:
>>>> if you
>>>> # make a mistake in the remote path, you could could
>>>> unintentionally
>>>> # cause unrelated files to be deleted. Set to 1 to enable
>>>> remote file
>>>> # deletion, zero to allow files to accumulate remotely.
>>>> delete = 0
>>>>
>>>> # Options in the [[Defaults]] section below will apply to all
>>>> reports.
>>>> # What follows are a few of the more popular options you may want to
>>>> # uncomment, then change.
>>>> [[Defaults]]
>>>>
>>>> # Which language to use for all reports. Not all skins support
>>>> all
>>>> # languages. You can override this for individual reports.
>>>> lang = en
>>>>
>>>> # Which unit system to use for all reports. Choices are 'us',
>>>> 'metric',
>>>> # or 'metricwx'. You can override this for individual reports.
>>>> unit_system = us
>>>>
>>>> [[[Units]]]
>>>>
>>>> # Option "unit_system" above sets the general unit system,
>>>> but
>>>> # overriding specific unit groups is possible. These are
>>>> popular
>>>> # choices. Uncomment and set as appropriate. The unit is
>>>> always
>>>> # in the singular, e.g., 'mile_per_hour', NOT
>>>> 'miles_per_hour'
>>>> [[[[Groups]]]]
>>>> # group_altitude = meter # Options are
>>>> 'foot' or 'meter'
>>>> # group_pressure = mbar # Options are
>>>> 'inHg', 'mmHg', 'mbar', or 'hPa'
>>>> # group_rain = mm # Options are
>>>> 'inch', 'cm', or 'mm'
>>>> # group_rainrate = mm_per_hour # Options are
>>>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>>>> # group_temperature = degree_C # Options are
>>>> 'degree_C', 'degree_F', or 'degree_K'
>>>> # The following line is used to keep the above lines
>>>> indented
>>>> # properly. It can be ignored.
>>>> unused = unused
>>>>
>>>> # Uncommenting the following section frequently results in
>>>> more
>>>> # attractive formatting of times and dates, but may not
>>>> work in
>>>> # your locale.
>>>> [[[[TimeFormats]]]]
>>>> # day = %H:%M
>>>> # week = %H:%M on %A
>>>> # month = %d-%b-%Y %H:%M
>>>> # year = %d-%b-%Y %H:%M
>>>> # rainyear = %d-%b-%Y %H:%M
>>>> # current = %d-%b-%Y %H:%M
>>>> # ephem_day = %H:%M
>>>> # ephem_year = %d-%b-%Y %H:%M
>>>> # The following line is used to keep the above lines
>>>> indented
>>>> # properly. It can be ignored.
>>>> unused = unused
>>>>
>>>> [[[Labels]]]
>>>> # Users frequently change the labels for these observation
>>>> types.
>>>> [[[[Generic]]]]
>>>> # inHumidity = Inside Humidity
>>>> # inTemp = Inside Temperature
>>>> # outHumidity = Outside Humidity
>>>> # outTemp = Outside Temperature
>>>> # extraTemp1 = Temperature1
>>>> # extraTemp2 = Temperature2
>>>> # extraTemp3 = Temperature3
>>>> # The following line is used to keep the above lines
>>>> indented
>>>> # properly. It can be ignored.
>>>> unused = unused
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This service converts the unit system coming from the hardware to a
>>>> unit
>>>> # system in the database.
>>>>
>>>> [StdConvert]
>>>>
>>>> # The target_unit affects only the unit system in the database. Once
>>>> # chosen it cannot be changed without converting the entire
>>>> database.
>>>> # Modification of target_unit after starting weewx will result in
>>>> # corrupt data - the database will contain a mix of US and METRIC
>>>> data.
>>>> #
>>>> # The value of target_unit does not affect the unit system for
>>>> # reporting - reports can display US, Metric, or any combination of
>>>> units.
>>>> #
>>>> # In most cases, target_unit should be left as the default: US
>>>> #
>>>> # In particular, those migrating from a standard wview installation
>>>> # should use US since that is what the wview database contains.
>>>>
>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section can adjust data using calibration expressions.
>>>>
>>>> [StdCalibrate]
>>>>
>>>> [[Corrections]]
>>>> # For each type, an arbitrary calibration expression can be
>>>> given.
>>>> # It should be in the units defined in the StdConvert section.
>>>> # Example:
>>>> foo = foo + 0.2
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section is for quality control checks. If units are not
>>>> specified,
>>>> # values must be in the units defined in the StdConvert section.
>>>>
>>>> [StdQC]
>>>>
>>>> [[MinMax]]
>>>> barometer = 26, 32.5, inHg
>>>> pressure = 24, 34.5, inHg
>>>> outTemp = -40, 120, degree_F
>>>> inTemp = 10, 120, degree_F
>>>> outHumidity = 0, 100
>>>> inHumidity = 0, 100
>>>> windSpeed = 0, 120, mile_per_hour
>>>> rain = 0, 10, inch
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section controls the origin of derived values.
>>>>
>>>> [StdWXCalculate]
>>>>
>>>> [[Calculations]]
>>>> # How to calculate derived quantities. Possible values are:
>>>> # hardware - use the value provided by hardware
>>>> # software - use the value calculated by weewx
>>>> # prefer_hardware - use value provide by hardware if available,
>>>> # otherwise use value calculated by weewx
>>>>
>>>> pressure = prefer_hardware
>>>> altimeter = prefer_hardware
>>>> appTemp = prefer_hardware
>>>> barometer = prefer_hardware
>>>> cloudbase = prefer_hardware
>>>> dewpoint = prefer_hardware
>>>> ET = prefer_hardware
>>>> heatindex = prefer_hardware
>>>> humidex = prefer_hardware
>>>> inDewpoint = prefer_hardware
>>>> maxSolarRad = prefer_hardware
>>>> rainRate = prefer_hardware
>>>> windchill = prefer_hardware
>>>> windrun = prefer_hardware
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # For hardware that supports it, this section controls how often the
>>>> # onboard clock gets updated.
>>>>
>>>> [StdTimeSynch]
>>>>
>>>> # How often to check the weather station clock for drift (in
>>>> seconds)
>>>> clock_check = 14400
>>>>
>>>> # How much it can drift before we will correct it (in seconds)
>>>> max_drift = 5
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section is for configuring the archive service.
>>>>
>>>> [StdArchive]
>>>>
>>>> # If the station hardware supports data logging then the archive
>>>> interval
>>>> # will be downloaded from the station. Otherwise, specify it (in
>>>> seconds).
>>>> archive_interval = 300
>>>>
>>>> # If possible, new archive records are downloaded from the station
>>>> # hardware. If the hardware does not support this, then new archive
>>>> # records will be generated in software.
>>>> # Set the following to "software" to force software record
>>>> generation.
>>>> record_generation = hardware
>>>>
>>>> # Whether to include LOOP data in hi/low statistics.
>>>> loop_hilo = True
>>>>
>>>> # Uncomment and change to override logging for archive operations.
>>>> # log_success = True
>>>> # log_failure = True
>>>>
>>>> # The data binding used to save archive records.
>>>> data_binding = wx_binding
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section binds a data store to a database.
>>>>
>>>> [DataBindings]
>>>>
>>>> [[wx_binding]]
>>>> # The database must match one of the sections in [Databases].
>>>> # This is likely to be the only option you would want to change.
>>>> database = archive_sqlite
>>>> # The name of the table within the database.
>>>> table_name = archive
>>>> # The manager handles aggregation of data for historical
>>>> summaries.
>>>> manager = weewx.manager.DaySummaryManager
>>>> # The schema defines the structure of the database.
>>>> # It is *only* used when the database is created.
>>>> schema = schemas.wview_extended.schema
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section defines various databases.
>>>>
>>>> [Databases]
>>>>
>>>> # A SQLite database is simply a single file.
>>>> [[archive_sqlite]]
>>>> database_name = weewx.sdb
>>>> database_type = SQLite
>>>>
>>>> # MySQL
>>>> [[archive_mysql]]
>>>> database_name = weewx
>>>> database_type = MySQL
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section defines defaults for the different types of databases.
>>>>
>>>> [DatabaseTypes]
>>>>
>>>> # Defaults for SQLite databases.
>>>> [[SQLite]]
>>>> driver = weedb.sqlite
>>>> # Directory in which database files are located, relative to
>>>> WEEWX_ROOT
>>>> SQLITE_ROOT = /var/lib/weewx
>>>>
>>>> # Defaults for MySQL databases.
>>>> [[MySQL]]
>>>> driver = weedb.mysql
>>>> # The host where the database is located.
>>>> host = localhost
>>>> # The user name for logging in to the host.
>>>> user = XXXXXX
>>>> # Use quotes around the password to guard against parsing
>>>> errors.
>>>> password = XXXXXX
>>>>
>>>>
>>>> ##############################################################################
>>>>
>>>> # This section configures the internal weewx engine.
>>>>
>>>> [Engine]
>>>>
>>>> # This section specifies which services should be run and in what
>>>> order.
>>>> [[Services]]
>>>> prep_services = weewx.engine.StdTimeSynch
>>>> data_services = ,
>>>> process_services = weewx.engine.StdConvert,
>>>> weewx.engine.StdCalibrate, weewx.engine.StdQC,
>>>> weewx.wxservices.StdWXCalculate
>>>> xtype_services = weewx.wxxtypes.StdWXXTypes,
>>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
>>>> weewx.wxxtypes.StdDelta
>>>> archive_services = weewx.engine.StdArchive
>>>> restful_services = weewx.restx.StdStationRegistry,
>>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
>>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>>>> scott@spi-1:~ $
>>>>
>>>>
>>>> On Sunday, February 2, 2025 at 3:01:39 PM UTC-5 scott pierce wrote:
>>>>
>>>>> Yes, big rookie mistake. Working through it now. Thanks for pointing
>>>>> out!!
>>>>> Scott
>>>>>
>>>>>
>>>>> On Sunday, February 2, 2025 at 2:37:45 PM UTC-5 michael.k...@gmx.at
>>>>> wrote:
>>>>>
>>>>>> Maybe you missed that you refer to a 4.9 version of the docs, but
>>>>>> you've installed a 5.1 version?
>>>>>>
>>>>>> https://weewx.com/docs/5.1/usersguide/where/?h=find#where-to-find-things
>>>>>>
>>>>>> scott pierce schrieb am Sonntag, 2. Februar 2025 um 20:33:42 UTC+1:
>>>>>>
>>>>>>> *Also....where are the executables? In the documentation it says:*
>>>>>>>
>>>>>>> This is a reference guide to the executable utilities that come with
>>>>>>> WeeWX:
>>>>>>>
>>>>>>> - wee_config
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_config_utility> for
>>>>>>> changing the configuration file, and configuring new device drivers;
>>>>>>> - wee_database
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_database_utility> for
>>>>>>> reconfiguring the database;
>>>>>>> - wee_debug
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_debug_utility> for
>>>>>>> producing debug reports for remote support;
>>>>>>> - wee_device
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_device_utility> for
>>>>>>> configuring your hardware;
>>>>>>> - wee_extension
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_extension_utility> for
>>>>>>> installing and removing extensions;
>>>>>>> - wee_import
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_import_utility> for
>>>>>>> importing historical data from external sources;
>>>>>>> - wee_reports
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_reports_utility> for
>>>>>>> running reports without running WeeWX itself;
>>>>>>> - weewxd <https://weewx.com/docs/4.9/utilities.htm#weewxd> the
>>>>>>> main weewx program;
>>>>>>> - wunderfixer
>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wunderfixer_utility> for
>>>>>>> resending data missing on the Weather Underground site.
>>>>>>>
>>>>>>>
>>>>>>> *And then to find them....*
>>>>>>>
>>>>>>> Location of WeeWX components¶
>>>>>>> <https://weewx.com/docs/5.0/usersguide/where/#location-of-weewx-components>
>>>>>>>
>>>>>>>
>>>>>>> Executables*BIN_ROOT*/usr/share/weewx/
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *But when I look in that directory....*
>>>>>>>
>>>>>>> @spi-1:/usr/share/weewx $ ls
>>>>>>> __pycache__ weecfg weectl.py weeimport weeutil weewx_data
>>>>>>> schemas weectllib weedb weeplot weewx weewxd.py
>>>>>>> @spi-1:/usr/share/weewx $
>>>>>>>
>>>>>>> *None of them show up. What am I missing?*
>>>>>>>
>>>>>>> *Thanks*
>>>>>>> *Scott*
>>>>>>>
>>>>>>>
>>>>>>> On Sunday, February 2, 2025 at 12:03:03 PM UTC-5 scott pierce wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>> I was able to update the confi file and change the Debug to
>>>>>>>> 1...which in itself is a huge win as it took me a while to figure out
>>>>>>>> how
>>>>>>>> to even access the file. (permissions have been a bear to learn). I
>>>>>>>> have
>>>>>>>> read a lot in the last 24 hours!
>>>>>>>> That said, I still don't know how to access any additional log
>>>>>>>> information. When I run the status check, it comes back with
>>>>>>>> basically the
>>>>>>>> same info...
>>>>>>>> × weewx.service - WeeWX
>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>> preset: enabled)
>>>>>>>> Active: failed (Result: exit-code) since Sun 2025-02-02
>>>>>>>> 11:35:11 EST; 23min ago
>>>>>>>> Duration: 18min 49.054s
>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>> Process: 1261 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>> (code=exited, status=4)
>>>>>>>> Main PID: 1261 (code=exited, status=4)
>>>>>>>> CPU: 873ms
>>>>>>>>
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
>>>>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1444, in
>>>>>>>> _setup
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
>>>>>>>> self.hardware_type = self._determine_hardware()
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
>>>>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
>>>>>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1435, in
>>>>>>>> _determine_hardware
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
>>>>>>>> raise weewx.WeeWxIOError("Unable to read hardware type")
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine: ****
>>>>>>>> weewx.WeeWxIOError: Unable to read hardware type
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: Unable to
>>>>>>>> load driver: Unable to read hardware type
>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: ****
>>>>>>>> Exiting...
>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Failed with result
>>>>>>>> 'exit-code'.
>>>>>>>> ~
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Scott
>>>>>>>> On Saturday, February 1, 2025 at 10:51:51 PM UTC-5 John Kline wrote:
>>>>>>>>
>>>>>>>>> If you set debug = 1 and restart weewx, we’ll get to see the
>>>>>>>>> hardware_type read from the envoy.
>>>>>>>>> The line in the log will contain “Hardware type is “
>>>>>>>>>
>>>>>>>>> On Feb 1, 2025, at 6:34 PM, scott pierce <johnsco...@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> Successfully installed WeeWX on Rpi 5 and it's ingesting data
>>>>>>>>> from Davis Envoy USB Weather Link data logger.
>>>>>>>>>
>>>>>>>>> Also, I have been able to view reports...so that's nice.
>>>>>>>>> I'm just beginning this journey so still a lot to learn and set up.
>>>>>>>>> One quick question I can't find an answer to in the group or in
>>>>>>>>> notes...
>>>>>>>>> when I run a status check this is the result...
>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>>> preset: enabled)
>>>>>>>>> Active: failed (Result: exit-code) since Sat 2025-02-01
>>>>>>>>> 21:18:12 EST; 7min ago
>>>>>>>>> Duration: 35min 33.415s
>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>> Process: 6313 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>> (code=exited, status=4)
>>>>>>>>> Main PID: 6313 (code=exited, status=4)
>>>>>>>>> CPU: 2.339s
>>>>>>>>>
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>> **** log.debug("Hardware name: %s", self.hardware_name)
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416,
>>>>>>>>> in
>>>>>>>>> hardware_name
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>> **** raise weewx.UnsupportedFeature("Unknown hardware type %d" %
>>>>>>>>> self.hardware_type)
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>> **** weewx.UnsupportedFeature: Unknown hardware type 10
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: Unable to
>>>>>>>>> load driver: Unknown hardware type 10
>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: ****
>>>>>>>>> Exiting...
>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>> result 'exit-code'.
>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Consumed 2.339s
>>>>>>>>> CPU time.
>>>>>>>>>
>>>>>>>>> I'm guessing I put the hardware name in wrong in setup...not
>>>>>>>>> sure. Also don't know where to look to check.
>>>>>>>>> Any suggestions are appreciated.
>>>>>>>>> Thanks
>>>>>>>>> Scott
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>> To view this discussion visit
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com
>>>>>>>>>
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/b7120bac-657e-4445-b785-7b5cc3a09da4n%40googlegroups.com.
