I'm fairly sure you can still use the driver I linked to, it's not just for use with sdr, it integrates the BME280 data with the station data that the weewx loop is collecting, so if your console is connected via usb it should still work. There's more details in the readme for the driver ( follow the link I posted) Regards Jimi
On Sun, 1 Dec 2024, 8:25 pm Roberto Verrelli, <roberto.verre...@gmail.com> wrote: > Hi, > > In your case is different since you do not have the console at all,I was > wondering if I can do as I described In my original post,maintaining the > console and replacing only the barometer and having again NOAA correctly > generated,like my console never lost the barometer "signal". > Thanks > > Il sab 30 nov 2024, 17:47 Jimi Lawson <jimi.law...@gmail.com> ha scritto: > >> Yes you can I use one of these https://www.adafruit.com/product/2651 >> connected to a RPi 3B running WEEWX and a SDR dongle to collect signals >> from my WH1081(Maplin clone) outdoor sensors as my console died,. I used >> this driver https://gitlab.com/wjcarpenter/bme280wx which adds the >> pressure/temp/humidity from the BME280 into the data from the SDR. This is >> on WEEWX 4.10.2 don't know if the driver works with later versions. >> Regards >> Jimi >> On Saturday, 30 November 2024 at 14:40:53 UTC Roberto Verrelli wrote: >> >>> Hi, >>> >>> i have a wh1080se weather station, and the console is not showing >>> anymore the barometric pressure. >>> I have weewx installed and unfortunately,without the baremoeter, noaa >>> are not being generating anymore. >>> I have several barometric sensor since i do some iot projects, i was >>> wondering if i can add one of those sensors(bmp180,bmp280 and others) to a >>> gpio pin of raspberry where weewx is running and "replace" the barometric >>> reading with this new sensor instead of the one of the console. >>> In this way,noaa will be generated again? >>> Thanks in advance. >>> >>> Roberto >>> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/9ZQAvfQTDSk/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> weewx-user+unsubscr...@googlegroups.com. >> To view this discussion visit >> https://groups.google.com/d/msgid/weewx-user/adae3d78-194a-4dcd-a5b8-5caf006dd19dn%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/adae3d78-194a-4dcd-a5b8-5caf006dd19dn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/weewx-user/CAGvLVeiD1aqH8MF_vSsZi0%3DNvka-K7e8NuwJ3oqQDT_RpTH%3D%2Bg%40mail.gmail.com > <https://groups.google.com/d/msgid/weewx-user/CAGvLVeiD1aqH8MF_vSsZi0%3DNvka-K7e8NuwJ3oqQDT_RpTH%3D%2Bg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/CAEzr%3D0b69_PAY_dhjaNuLvRM0_3YhfTkPTtPr7qZexTeV3proQ%40mail.gmail.com.
