The webpages in the Seasons skin do not auto refresh. However, it's easy
enough to add. In the file index.html.tmpl, in the <head> section add this
<meta http-equiv="refresh" content="*refresh_interval*">
where *refresh_interval* is how often to refresh in seconds.
On Mon, May 6, 2024 at 2:00 PM Dan Chant <danch...@gmail.com> wrote:
> Hi,
>
> I've successfully setup Weewx 5.0.2 using WeatherflowUDP extension on a
> Raspberry Pi 4 running bookworm. I'm hosting the Weewx webpage using nginx
> which displays the weewx webpage successfully but doesn't automatically
> update the page forcing me to manually refresh the page every time I need
> to view an update of the page.
>
> Does this sound like an issue with Weewx or Nginx?
>
> Any help or guidance you are able to offer would be greatly appreciated.
>
> Thanks,
> Dan
>
> sudo journalctl -u weewx
> May 06 21:14:46 pi4 systemd[1]: Started weewx.service - WeeWX.
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Initializing weewxd
> version 5.0.2
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Command line:
> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Using Python 3.11.2
> (main, Mar 13 2023, 12:18:29) [GCC 12.2.0]
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Located at
> /usr/bin/python3
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Platform
> Linux-6.6.28+rpt-rpi-v8-aarch64-with-glibc2.36
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Locale: 'en_GB.UTF-8'
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Entry path:
> /usr/share/weewx/weewxd.py
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: WEEWX_ROOT: /etc/weewx
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Configuration file:
> /etc/weewx/weewx.conf
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: User module:
> /etc/weewx/bin/user
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Debug: 1
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG __main__: Initializing engine
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Loading station type
> WeatherFlowUDP (user.weatherflowudp)
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: driver
> version is 1.10
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: sensor
> map is {'outTemp': 'air_temperature.ST-00048813.obs_st', 'outHumidity':
> 'relative_humidity.ST-00048813.obs_st', 'pressure':
> 'station_pressure.ST->May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp:
> MainThread: *** Sensor names per packet type
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
> obs_air: ('time_epoch', 'station_pressure', 'air_temperature',
> 'relative_humidity', 'lightning_strike_count',
> 'lightning_strike_avg_distance', 'b>May 06 21:14:46 pi4 weewxd.py[3365]:
> weatherflowudp: MainThread: packet obs_sky: ('time_epoch', 'illuminance',
> 'uv', 'rain_accumulated', 'wind_lull', 'wind_avg', 'wind_gust',
> 'wind_direction', 'battery', 'report_inter>May 06 21:14:46 pi4
> weewxd.py[3365]: weatherflowudp: MainThread: packet rapid_wind:
> ('time_epoch', 'wind_speed', 'wind_direction')
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
> evt_precip: time_epoch
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
> evt_strike: ('time_epoch', 'distance', 'energy')
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
> obs_st: ('time_epoch', 'wind_lull', 'wind_avg', 'wind_gust',
> 'wind_direction', 'wind_sample_interval', 'station_pressure',
> 'air_temperature', 're>May 06 21:14:46 pi4 weewxd[3365]: DEBUG
> weewx.engine: Loading service weewx.engine.StdTimeSynch
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdTimeSynch
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.engine.StdConvert
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: StdConvert target
> unit is 0x1
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdConvert
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.engine.StdCalibrate
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdCalibrate
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.engine.StdQC
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdQC
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.wxservices.StdWXCalculate
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.wxservices: StdWXCalculate
> will use data binding wx_binding
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.manager: Daily summary
> version is 4.0
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.wxservices.StdWXCalculate
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdWXXTypes
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.wxxtypes.StdWXXTypes
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdPressureCooker
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.wxxtypes.StdPressureCooker
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdRainRater
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.wxxtypes.StdRainRater
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdDelta
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.wxxtypes.StdDelta
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.engine.StdArchive
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Archive will use data
> binding wx_binding
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Record generation
> will be attempted in 'software'
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Using archive
> interval of 300 seconds (software record generation)
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Use LOOP data in
> hi/low calculations: 1
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdArchive
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.restx.StdStationRegistry
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: StationRegistry:
> Registration not requested.
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.restx.StdStationRegistry
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.restx.StdWunderground
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: Wunderground: Posting
> not enabled.
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.restx.StdWunderground
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.restx.StdPWSweather
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: PWSweather: Posting
> not enabled.
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.restx.StdPWSweather
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.restx.StdCWOP
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: CWOP: Posting not
> enabled.
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.restx.StdCWOP
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.restx.StdWOW
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: WOW: Posting not
> enabled.
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.restx.StdWOW
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.restx.StdAWEKAS
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: AWEKAS: Posting not
> enabled.
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.restx.StdAWEKAS
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.engine.StdPrint
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdPrint
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
> weewx.engine.StdReport
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: 'pyephem' detected,
> extended almanac data is available
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
> service weewx.engine.StdReport
> May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Starting up weewx version
> 5.0.2
> May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Station does not
> support reading the time
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Using binding
> 'wx_binding' to database 'weewx.sdb'
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.manager: Starting backfill of
> daily summaries
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.manager: Daily summaries up
> to date
> May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Starting main packet
> loop.
> May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: Listening
> for UDP broadcasts to IP address 0.0.0.0 on port 50222, with timeout 90 and
> share_socket False...
> May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Running
> reports for latest time in the database.
> May 06 21:15:18 pi4 weewxd.py[3365]: weatherflowudp: MainThread: Listening
> for UDP broadcasts to IP address 0.0.0.0 on port 50222, with timeout 90 and
> share_socket False...
> May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Running report
> 'SeasonsReport'
> May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Found
> configuration file /etc/weewx/skins/Seasons/skin.conf for report
> 'SeasonsReport'
> May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Running
> generators for report 'SeasonsReport' in directory
> '/etc/weewx/skins/Seasons'
> May 06 21:15:19 pi4 weewxd[3365]: DEBUG weewx.cheetahgenerator: Using
> search list ['weewx.cheetahgenerator.Almanac',
> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.DisplayOptions',
> 'weewx.cheetahgenerator.E>May 06 21:15:19 pi4 weewxd[3365]: DEBUG
> weewx.manager: Daily summary version is 4.0
> May 06 21:15:20 pi4 weewxd[3365]: DEBUG weewx.manager: Daily summary
> version is 4.0
> May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report
> 'SmartphoneReport' not enabled. Skipping.
> May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report
> 'MobileReport' not enabled. Skipping.
> May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report
> 'StandardReport' not enabled. Skipping.
> May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report 'FTP'
> not enabled. Skipping.
> May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report 'RSYNC'
> not enabled. Skipping.
>
> Copy of weewx.conf
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2024 Tom Keffer <tkef...@gmail.com>
> # See the file LICENSE.txt for your rights.
>
>
> ##############################################################################
>
> # This section is for general configuration information.
>
> # Set to 1 for extra debug info, otherwise comment it out or set to zero.
> debug = 1
>
> # Whether to log successful operations. May get overridden below.
> log_success = False
>
> # Whether to log unsuccessful operations. May get overridden below.
> log_failure = True
>
> # This configuration file was created by ...
> version = 5.0.2
>
>
> ##############################################################################
>
> # This section is for information about the station.
>
> [Station]
>
> # Description of the station location
> location = "Ashton on Mersey - Weather Station, Sale, UK"
>
> # Latitude in decimal degrees. Negative for southern hemisphere
> latitude = 53.42532
> # Longitude in decimal degrees. Negative for western hemisphere.
> longitude = -2.34762
>
> # Altitude of the station, with unit it is in. This is downloaded from
> # from the station if the hardware supports it.
> altitude = 22, meter
>
> # Set to type of station hardware. There must be a corresponding stanza
> # in this file with a 'driver' parameter indicating the driver to be
> used.
> station_type = WeatherFlowUDP
>
> # If you have a website, you may specify an URL
> station_url = http://tempestwx.com/station/56524
>
> # The start of the rain year (1=January; 10=October, etc.). This is
> # downloaded from the station if the hardware supports it.
> rain_year_start = 1
>
> # Start of week (0=Monday, 6=Sunday)
> week_start = 0
>
>
>
> ##############################################################################
>
> [Simulator]
> # This section is for the weewx weather station simulator.
>
> # The time (in seconds) between LOOP packets.
> #loop_interval = 2.5
>
> # The simulator mode can be either 'simulator' or 'generator'.
> # Real-time simulator. Sleep between each LOOP packet.
> #mode = simulator
> # Generator. Emit LOOP packets as fast as possible (useful for
> testing).
> #mode = generator
>
> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
> # default is to use the present time.
> #start = 2011-01-01T00:00
>
> # The driver to use.
> #driver = weewx.drivers.simulator
>
>
> ##############################################################################
>
>
> ##############################################################################
>
> [WeatherFlowUDP]
> driver = user.weatherflowudp
> log_raw_packets = False
> udp_address = 0.0.0.0
> # udp_address = 0.0.0.0
> # udp_address = 255.255.255.255
> udp_port = 50222
> udp_timeout = 90
> share_socket = False
>
> [[sensor_map]]
> outTemp = air_temperature.ST-00048813.obs_st
> outHumidity = relative_humidity.ST-00048813.obs_st
> pressure = station_pressure.ST-00048813.obs_st
> lightning_strikes = lightning_strike_count.ST-00048813.obs_st
> avg_distance = lightning_strike_avg_distance.ST-00048813.obs_st
> outTempBatteryStatus = battery.ST-00048813.obs_st
> windSpeed = wind_speed.ST-00048813.rapid_wind
> windDir = wind_direction.ST-00048813.rapid_wind
> luxXXX = illuminance.ST-00048813.obs_st
> UV = uv.ST-00048813.obs_st
> rain = rain_accumulated.ST-00048813.obs_st
> windBatteryStatus = battery.ST-00048813.obs_st
> radiation = solar_radiation.ST-00048813.obs_st
> lightningXXX = distance.ST-00048813.evt_strike
> lightningYYY = energy.ST-00048813.evt_strike
>
>
> ##############################################################################
>
>
> # This section is for uploading data to Internet sites
>
> [StdRESTful]
>
> # Uncomment and change to override logging for uploading services.
> # log_success = True
> # log_failure = True
>
> [[StationRegistry]]
> # To register this weather station at weewx.com, set this to
> true, and
> # set option 'station_url', located in the [Station] section above.
> register_this_station = False
>
> [[AWEKAS]]
> # This section is for configuring posts to AWEKAS.
>
> # If you wish to post to AWEKAS, set the option 'enable' to true,
> then
> # specify a username and password.
> # Use quotes around the password to guard against parsing errors.
> enable = false
> username = replace_me
> password = replace_me
>
> [[CWOP]]
> # This section is for configuring posts to CWOP.
>
> # If you wish to post to CWOP, set the option 'enable' to true,
> # then specify the station ID (e.g., CW1234).
> enable = false
> station = replace_me
> # If this is an APRS (radio amateur) station, specify the
> # passcode (e.g., 12345). Otherwise, ignore.
> passcode = replace_me
>
> [[PWSweather]]
> # This section is for configuring posts to PWSweather.com.
>
> # If you wish to post to PWSweather.com, set the option 'enable' to
> # true, then specify a station and password.
> # Use quotes around the password to guard against parsing errors.
> enable = false
> station = replace_me
> password = replace_me
>
> [[WOW]]
> # This section is for configuring posts to WOW.
>
> # If you wish to post to WOW, set the option 'enable' to true, then
> # specify a station and password.
> # Use quotes around the password to guard against parsing errors.
> enable = false
> station = replace_me
> password = replace_me
>
> [[Wunderground]]
> # This section is for configuring posts to the Weather Underground.
>
> # If you wish to post to the Weather Underground, set the option
> # 'enable' to true, then specify a station (e.g., 'KORHOODR3').
> Use
> # the station key (find it at
> # https://www.wunderground.com/member/devices) for the password.
> enable = false
> station = replace_me
> password = replace_me
>
> # Set the following to True to have weewx use the WU "Rapidfire"
> # protocol. Not all hardware can support it. See the User's Guide.
> rapidfire = False
>
>
> ##############################################################################
>
> # This section specifies what reports, using which skins, to generate.
>
> [StdReport]
>
> # Where the skins reside, relative to WEEWX_ROOT
> SKIN_ROOT = skins
>
> # Where the generated reports should go, relative to WEEWX_ROOT
> HTML_ROOT = /var/www/html/weewx
>
> # Uncomment and change to override logging for reports.
> # log_success = True
> # log_failure = True
>
> # The database binding indicates which data should be used in reports.
> data_binding = wx_binding
>
> # Each of the following subsections defines a report that will be run.
> # See the customizing guide to change the units, plot types and line
> # colors, modify the fonts, display additional sensor data, and other
> # customizations. Many of those changes can be made here by overriding
> # parameters, or by modifying templates within the skin itself.
>
> [[SeasonsReport]]
> # The SeasonsReport uses the 'Seasons' skin, which contains the
> # images, templates and plots for the report.
> skin = Seasons
> enable = true
>
> [[SmartphoneReport]]
> # The SmartphoneReport uses the 'Smartphone' skin, and the images
> and
> # files are placed in a dedicated subdirectory.
> skin = Smartphone
> enable = false
> HTML_ROOT = /var/www/html/weewx/smartphone
>
> [[MobileReport]]
> # The MobileReport uses the 'Mobile' skin, and the images and files
> # are placed in a dedicated subdirectory.
> skin = Mobile
> enable = false
> HTML_ROOT = /var/www/html/weewx/mobile
>
> [[StandardReport]]
> # This is the old "Standard" skin. By default, it is not enabled.
> skin = Standard
> enable = false
>
> [[FTP]]
> # FTP'ing the results to a webserver is treated as just another
> report,
> # albeit one with an unusual report generator!
> skin = Ftp
>
> # If you wish to use FTP, set "enable" to "true", then fill out the
> # next four lines.
> # Use quotes around the password to guard against parsing errors.
> enable = false
> user = replace_me
> password = replace_me
> server = replace_me # The ftp server name, e.g,
> www.myserver.org
> path = replace_me # The destination directory, e.g., /weather
>
> # Set to True for an FTP over TLS (FTPS) connection. Not all
> servers
> # support this.
> secure_ftp = False
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = /var/www/html/weewx
>
> # Most FTP servers use port 21.
> port = 21
>
> # Set to 1 to use passive mode, zero for active mode
> passive = 1
>
> [[RSYNC]]
> # rsync'ing to a webserver is treated as just another report.
> skin = Rsync
>
> # If you wish to use rsync, you must configure passwordless ssh
> using
> # public/private key authentication from the user account that
> weewx
> # runs to the user account on the remote machine where the files
> # will be copied.
> #
> # If you wish to use rsync, set "enable" to "true", then
> # fill out server, user, and path.
> # The server should appear in your .ssh/config file.
> # The user is the username used in the identity file.
> # The path is the destination directory, such as
> /var/www/html/weather.
> # Be sure that the user has write permissions on the destination!
> enable = false
> server = replace_me
> user = replace_me
> path = replace_me
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> HTML_ROOT = /var/www/html/weewx
>
> # Rsync can be configured to remove files from the remote server if
> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if
> you
> # make a mistake in the remote path, you could could
> unintentionally
> # cause unrelated files to be deleted. Set to 1 to enable remote
> file
> # deletion, zero to allow files to accumulate remotely.
> delete = 0
>
> # Options in the [[Defaults]] section below will apply to all reports.
> # What follows are a few of the more popular options you may want to
> # uncomment, then change.
> [[Defaults]]
>
> # Which language to use for all reports. Not all skins support all
> # languages. You can override this for individual reports.
> lang = en
>
> # Which unit system to use for all reports. Choices are 'us',
> 'metric',
> # or 'metricwx'. You can override this for individual reports.
> unit_system = metricwx
>
> [[[Units]]]
>
> # Option "unit_system" above sets the general unit system, but
> # overriding specific unit groups is possible. These are
> popular
> # choices. Uncomment and set as appropriate. The unit is
> always
> # in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour'
> [[[[Groups]]]]
> # group_altitude = meter # Options are
> 'foot' or 'meter'
> # group_pressure = mbar # Options are
> 'inHg', 'mmHg', 'mbar', or 'hPa'
> # group_rain = mm # Options are
> 'inch', 'cm', or 'mm'
> # group_rainrate = mm_per_hour # Options are
> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
> # group_temperature = degree_C # Options are
> 'degree_C', 'degree_F', or 'degree_K'
> # The following line is used to keep the above lines
> indented
> # properly. It can be ignored.
> unused = unused
>
> # Uncommenting the following section frequently results in more
> # attractive formatting of times and dates, but may not work in
> # your locale.
> [[[[TimeFormats]]]]
> # day = %H:%M
> # week = %H:%M on %A
> # month = %d-%b-%Y %H:%M
> # year = %d-%b-%Y %H:%M
> # rainyear = %d-%b-%Y %H:%M
> # current = %d-%b-%Y %H:%M
> # ephem_day = %H:%M
> # ephem_year = %d-%b-%Y %H:%M
> # The following line is used to keep the above lines
> indented
> # properly. It can be ignored.
> unused = unused
>
> [[[Labels]]]
> # Users frequently change the labels for these observation
> types.
> [[[[Generic]]]]
> # inHumidity = Inside Humidity
> # inTemp = Inside Temperature
> # outHumidity = Outside Humidity
> # outTemp = Outside Temperature
> # extraTemp1 = Temperature1
> # extraTemp2 = Temperature2
> # extraTemp3 = Temperature3
> # The following line is used to keep the above lines
> indented
> # properly. It can be ignored.
> unused = unused
>
>
> ##############################################################################
>
> # This service converts the unit system coming from the hardware to a
> unit
> # system in the database.
>
> [StdConvert]
>
> # The target_unit affects only the unit system in the database. Once
> # chosen it cannot be changed without converting the entire database.
> # Modification of target_unit after starting weewx will result in
> # corrupt data - the database will contain a mix of US and METRIC data.
> #
> # The value of target_unit does not affect the unit system for
> # reporting - reports can display US, Metric, or any combination of
> units.
> #
> # In most cases, target_unit should be left as the default: US
> #
> # In particular, those migrating from a standard wview installation
> # should use US since that is what the wview database contains.
>
> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>
>
> ##############################################################################
>
> # This section can adjust data using calibration expressions.
>
> [StdCalibrate]
>
> [[Corrections]]
> # For each type, an arbitrary calibration expression can be given.
> # It should be in the units defined in the StdConvert section.
> # Example:
> foo = foo + 0.2
>
>
> ##############################################################################
>
> # This section is for quality control checks. If units are not specified,
> # values must be in the units defined in the StdConvert section.
>
> [StdQC]
>
> [[MinMax]]
> barometer = 26, 32.5, inHg
> pressure = 24, 34.5, inHg
> outTemp = -40, 120, degree_F
> inTemp = 10, 120, degree_F
> outHumidity = 0, 100
> inHumidity = 0, 100
> windSpeed = 0, 120, mile_per_hour
> rain = 0, 10, inch
>
>
> ##############################################################################
>
> # This section controls the origin of derived values.
>
> [StdWXCalculate]
>
> [[Calculations]]
> # How to calculate derived quantities. Possible values are:
> # hardware - use the value provided by hardware
> # software - use the value calculated by weewx
> # prefer_hardware - use value provide by hardware if available,
> # otherwise use value calculated by weewx
>
> pressure = prefer_hardware
> altimeter = prefer_hardware
> appTemp = prefer_hardware
> barometer = prefer_hardware
> cloudbase = prefer_hardware
> dewpoint = prefer_hardware
> ET = prefer_hardware
> heatindex = prefer_hardware
> humidex = prefer_hardware
> inDewpoint = prefer_hardware
> maxSolarRad = prefer_hardware
> rainRate = prefer_hardware
> windchill = prefer_hardware
> windrun = prefer_hardware
>
>
> ##############################################################################
>
> # For hardware that supports it, this section controls how often the
> # onboard clock gets updated.
>
> [StdTimeSynch]
>
> # How often to check the weather station clock for drift (in seconds)
> clock_check = 14400
>
> # How much it can drift before we will correct it (in seconds)
> max_drift = 5
>
>
> ##############################################################################
>
> # This section is for configuring the archive service.
>
> [StdArchive]
>
> # If the station hardware supports data logging then the archive
> interval
> # will be downloaded from the station. Otherwise, specify it (in
> seconds).
> archive_interval = 300
>
> # If possible, new archive records are downloaded from the station
> # hardware. If the hardware does not support this, then new archive
> # records will be generated in software.
> # Set the following to "software" to force software record generation.
> record_generation = software
>
> # Whether to include LOOP data in hi/low statistics.
> loop_hilo = True
>
> # Uncomment and change to override logging for archive operations.
> # log_success = True
> # log_failure = True
>
> # The data binding used to save archive records.
> data_binding = wx_binding
>
>
> ##############################################################################
>
> # This section binds a data store to a database.
>
> [DataBindings]
>
> [[wx_binding]]
> # The database must match one of the sections in [Databases].
> # This is likely to be the only option you would want to change.
> database = archive_sqlite
> # The name of the table within the database.
> table_name = archive
> # The manager handles aggregation of data for historical summaries.
> manager = weewx.manager.DaySummaryManager
> # The schema defines the structure of the database.
> # It is *only* used when the database is created.
> schema = schemas.wview_extended.schema
>
>
> ##############################################################################
>
> # This section defines various databases.
>
> [Databases]
>
> # A SQLite database is simply a single file.
> [[archive_sqlite]]
> database_name = weewx.sdb
> database_type = SQLite
>
> # MySQL
> [[archive_mysql]]
> database_name = weewx
> database_type = MySQL
>
>
> ##############################################################################
>
> # This section defines defaults for the different types of databases.
>
> [DatabaseTypes]
>
> # Defaults for SQLite databases.
> [[SQLite]]
> driver = weedb.sqlite
> # Directory in which database files are located, relative to
> WEEWX_ROOT
> SQLITE_ROOT = /var/lib/weewx
>
> # Defaults for MySQL databases.
> [[MySQL]]
> driver = weedb.mysql
> # The host where the database is located.
> host = localhost
> # The user name for logging in to the host.
> user = weewx
> # Use quotes around the password to guard against parsing errors.
> password = weewx
>
>
> ##############################################################################
>
> # This section configures the internal weewx engine.
>
> [Engine]
>
> # This section specifies which services should be run and in what
> order.
> [[Services]]
> prep_services = weewx.engine.StdTimeSynch
> data_services = ,
> process_services = weewx.engine.StdConvert,
> weewx.engine.StdCalibrate, weewx.engine.StdQC,
> weewx.wxservices.StdWXCalculate
> xtype_services = weewx.wxxtypes.StdWXXTypes,
> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
> weewx.wxxtypes.StdDelta
> archive_services = weewx.engine.StdArchive
> restful_services = weewx.restx.StdStationRegistry,
> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/8604f9fa-c594-4849-9738-d1cf00a5603dn%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/8604f9fa-c594-4849-9738-d1cf00a5603dn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEBuk9wLe%2BbVFKwRkyRY5mMe1%2BgbLpZNuyFdv9eP9jajoA%40mail.gmail.com.
