Hi,
I've successfully setup Weewx 5.0.2 using WeatherflowUDP extension on a
Raspberry Pi 4 running bookworm. I'm hosting the Weewx webpage using nginx
which displays the weewx webpage successfully but doesn't automatically
update the page forcing me to manually refresh the page every time I need
to view an update of the page.
Does this sound like an issue with Weewx or Nginx?
Any help or guidance you are able to offer would be greatly appreciated.
Thanks,
Dan
sudo journalctl -u weewx
May 06 21:14:46 pi4 systemd[1]: Started weewx.service - WeeWX.
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Initializing weewxd
version 5.0.2
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Command line:
/usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Using Python 3.11.2 (main,
Mar 13 2023, 12:18:29) [GCC 12.2.0]
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Located at /usr/bin/python3
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Platform
Linux-6.6.28+rpt-rpi-v8-aarch64-with-glibc2.36
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Locale: 'en_GB.UTF-8'
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Entry path:
/usr/share/weewx/weewxd.py
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: WEEWX_ROOT: /etc/weewx
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Configuration file:
/etc/weewx/weewx.conf
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: User module:
/etc/weewx/bin/user
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Debug: 1
May 06 21:14:46 pi4 weewxd[3365]: DEBUG __main__: Initializing engine
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Loading station type
WeatherFlowUDP (user.weatherflowudp)
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: driver
version is 1.10
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: sensor map
is {'outTemp': 'air_temperature.ST-00048813.obs_st', 'outHumidity':
'relative_humidity.ST-00048813.obs_st', 'pressure':
'station_pressure.ST->May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp:
MainThread: *** Sensor names per packet type
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
obs_air: ('time_epoch', 'station_pressure', 'air_temperature',
'relative_humidity', 'lightning_strike_count',
'lightning_strike_avg_distance', 'b>May 06 21:14:46 pi4 weewxd.py[3365]:
weatherflowudp: MainThread: packet obs_sky: ('time_epoch', 'illuminance',
'uv', 'rain_accumulated', 'wind_lull', 'wind_avg', 'wind_gust',
'wind_direction', 'battery', 'report_inter>May 06 21:14:46 pi4
weewxd.py[3365]: weatherflowudp: MainThread: packet rapid_wind:
('time_epoch', 'wind_speed', 'wind_direction')
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
evt_precip: time_epoch
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
evt_strike: ('time_epoch', 'distance', 'energy')
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: packet
obs_st: ('time_epoch', 'wind_lull', 'wind_avg', 'wind_gust',
'wind_direction', 'wind_sample_interval', 'station_pressure',
'air_temperature', 're>May 06 21:14:46 pi4 weewxd[3365]: DEBUG
weewx.engine: Loading service weewx.engine.StdTimeSynch
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdTimeSynch
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.engine.StdConvert
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: StdConvert target unit
is 0x1
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdConvert
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.engine.StdCalibrate
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdCalibrate
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.engine.StdQC
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdQC
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.wxservices.StdWXCalculate
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.wxservices: StdWXCalculate
will use data binding wx_binding
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.manager: Daily summary
version is 4.0
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.wxservices.StdWXCalculate
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.wxxtypes.StdWXXTypes
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.wxxtypes.StdWXXTypes
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.wxxtypes.StdPressureCooker
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.wxxtypes.StdPressureCooker
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.wxxtypes.StdRainRater
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.wxxtypes.StdRainRater
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.wxxtypes.StdDelta
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.wxxtypes.StdDelta
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.engine.StdArchive
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Archive will use data
binding wx_binding
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Record generation will
be attempted in 'software'
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Using archive interval
of 300 seconds (software record generation)
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Use LOOP data in
hi/low calculations: 1
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdArchive
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.restx.StdStationRegistry
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: StationRegistry:
Registration not requested.
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.restx.StdStationRegistry
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.restx.StdWunderground
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: Wunderground: Posting
not enabled.
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.restx.StdWunderground
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.restx.StdPWSweather
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: PWSweather: Posting not
enabled.
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.restx.StdPWSweather
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.restx.StdCWOP
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: CWOP: Posting not
enabled.
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.restx.StdCWOP
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.restx.StdWOW
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: WOW: Posting not
enabled.
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.restx.StdWOW
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.restx.StdAWEKAS
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.restx: AWEKAS: Posting not
enabled.
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.restx.StdAWEKAS
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.engine.StdPrint
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdPrint
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Loading service
weewx.engine.StdReport
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: 'pyephem' detected,
extended almanac data is available
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Finished loading
service weewx.engine.StdReport
May 06 21:14:46 pi4 weewxd[3365]: INFO __main__: Starting up weewx version
5.0.2
May 06 21:14:46 pi4 weewxd[3365]: DEBUG weewx.engine: Station does not
support reading the time
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Using binding
'wx_binding' to database 'weewx.sdb'
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.manager: Starting backfill of
daily summaries
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.manager: Daily summaries up to
date
May 06 21:14:46 pi4 weewxd[3365]: INFO weewx.engine: Starting main packet
loop.
May 06 21:14:46 pi4 weewxd.py[3365]: weatherflowudp: MainThread: Listening
for UDP broadcasts to IP address 0.0.0.0 on port 50222, with timeout 90 and
share_socket False...
May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Running reports
for latest time in the database.
May 06 21:15:18 pi4 weewxd.py[3365]: weatherflowudp: MainThread: Listening
for UDP broadcasts to IP address 0.0.0.0 on port 50222, with timeout 90 and
share_socket False...
May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Running report
'SeasonsReport'
May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Found
configuration file /etc/weewx/skins/Seasons/skin.conf for report
'SeasonsReport'
May 06 21:15:18 pi4 weewxd[3365]: DEBUG weewx.reportengine: Running
generators for report 'SeasonsReport' in directory
'/etc/weewx/skins/Seasons'
May 06 21:15:19 pi4 weewxd[3365]: DEBUG weewx.cheetahgenerator: Using
search list ['weewx.cheetahgenerator.Almanac',
'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.DisplayOptions',
'weewx.cheetahgenerator.E>May 06 21:15:19 pi4 weewxd[3365]: DEBUG
weewx.manager: Daily summary version is 4.0
May 06 21:15:20 pi4 weewxd[3365]: DEBUG weewx.manager: Daily summary
version is 4.0
May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report
'SmartphoneReport' not enabled. Skipping.
May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report
'MobileReport' not enabled. Skipping.
May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report
'StandardReport' not enabled. Skipping.
May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report 'FTP'
not enabled. Skipping.
May 06 21:15:21 pi4 weewxd[3365]: DEBUG weewx.reportengine: Report 'RSYNC'
not enabled. Skipping.
Copy of weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2024 Tom Keffer <tkef...@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero.
debug = 1
# Whether to log successful operations. May get overridden below.
log_success = False
# Whether to log unsuccessful operations. May get overridden below.
log_failure = True
# This configuration file was created by ...
version = 5.0.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Ashton on Mersey - Weather Station, Sale, UK"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 53.42532
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -2.34762
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 22, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = WeatherFlowUDP
# If you have a website, you may specify an URL
station_url = http://tempestwx.com/station/56524
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator.
# The time (in seconds) between LOOP packets.
#loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
#mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for
testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
# default is to use the present time.
#start = 2011-01-01T00:00
# The driver to use.
#driver = weewx.drivers.simulator
##############################################################################
##############################################################################
[WeatherFlowUDP]
driver = user.weatherflowudp
log_raw_packets = False
udp_address = 0.0.0.0
# udp_address = 0.0.0.0
# udp_address = 255.255.255.255
udp_port = 50222
udp_timeout = 90
share_socket = False
[[sensor_map]]
outTemp = air_temperature.ST-00048813.obs_st
outHumidity = relative_humidity.ST-00048813.obs_st
pressure = station_pressure.ST-00048813.obs_st
lightning_strikes = lightning_strike_count.ST-00048813.obs_st
avg_distance = lightning_strike_avg_distance.ST-00048813.obs_st
outTempBatteryStatus = battery.ST-00048813.obs_st
windSpeed = wind_speed.ST-00048813.rapid_wind
windDir = wind_direction.ST-00048813.rapid_wind
luxXXX = illuminance.ST-00048813.obs_st
UV = uv.ST-00048813.obs_st
rain = rain_accumulated.ST-00048813.obs_st
windBatteryStatus = battery.ST-00048813.obs_st
radiation = solar_radiation.ST-00048813.obs_st
lightningXXX = distance.ST-00048813.evt_strike
lightningYYY = energy.ST-00048813.evt_strike
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True
[[StationRegistry]]
# To register this weather station at weewx.com, set this to true,
and
# set option 'station_url', located in the [Station] section above.
register_this_station = False
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to post to AWEKAS, set the option 'enable' to true,
then
# specify a username and password.
# Use quotes around the password to guard against parsing errors.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to post to CWOP, set the option 'enable' to true,
# then specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, specify the
# passcode (e.g., 12345). Otherwise, ignore.
passcode = replace_me
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to post to PWSweather.com, set the option 'enable' to
# true, then specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to post to WOW, set the option 'enable' to true, then
# specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to post to the Weather Underground, set the option
# 'enable' to true, then specify a station (e.g., 'KORHOODR3'). Use
# the station key (find it at
# https://www.wunderground.com/member/devices) for the password.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# Uncomment and change to override logging for reports.
# log_success = True
# log_failure = True
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images
and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then fill out the
# next four lines.
# Use quotes around the password to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21.
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report.
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as
/var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]
# Which language to use for all reports. Not all skins support all
# languages. You can override this for individual reports.
lang = en
# Which unit system to use for all reports. Choices are 'us',
'metric',
# or 'metricwx'. You can override this for individual reports.
unit_system = metricwx
[[[Units]]]
# Option "unit_system" above sets the general unit system, but
# overriding specific unit groups is possible. These are popular
# choices. Uncomment and set as appropriate. The unit is always
# in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are
'foot' or 'meter'
# group_pressure = mbar # Options are
'inHg', 'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are
'inch', 'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are
'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines
indented
# properly. It can be ignored.
unused = unused
# Uncommenting the following section frequently results in more
# attractive formatting of times and dates, but may not work in
# your locale.
[[[[TimeFormats]]]]
# day = %H:%M
# week = %H:%M on %A
# month = %d-%b-%Y %H:%M
# year = %d-%b-%Y %H:%M
# rainyear = %d-%b-%Y %H:%M
# current = %d-%b-%Y %H:%M
# ephem_day = %H:%M
# ephem_year = %d-%b-%Y %H:%M
# The following line is used to keep the above lines
indented
# properly. It can be ignored.
unused = unused
[[[Labels]]]
# Users frequently change the labels for these observation
types.
[[[[Generic]]]]
# inHumidity = Inside Humidity
# inTemp = Inside Temperature
# outHumidity = Outside Humidity
# outTemp = Outside Temperature
# extraTemp1 = Temperature1
# extraTemp2 = Temperature2
# extraTemp3 = Temperature3
# The following line is used to keep the above lines
indented
# properly. It can be ignored.
unused = unused
##############################################################################
# This service converts the unit system coming from the hardware to a unit
# system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics.
loop_hilo = True
# Uncomment and change to override logging for archive operations.
# log_success = True
# log_failure = True
# The data binding used to save archive records.
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database.
table_name = archive
# The manager handles aggregation of data for historical summaries.
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file.
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases.
[[SQLite]]
driver = weedb.sqlite
# Directory in which database files are located, relative to
WEEWX_ROOT
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases.
[[MySQL]]
driver = weedb.mysql
# The host where the database is located.
host = localhost
# The user name for logging in to the host.
user = weewx
# Use quotes around the password to guard against parsing errors.
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# This section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes,
weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/8604f9fa-c594-4849-9738-d1cf00a5603dn%40googlegroups.com.
