It's a little hard to guess what exactly you're trying to do and certainly impossible to guess what you're seeing as errors. Are you trying to get weewx to get your Ventus data from the gw2000 gateway ?
But regardless, you should take tiny steps toward the goal: - there are zillions of "Guide"(s). Which one are you using ? - what did you do ? What did you see ? - Hopefully you are following the 'debian' instructions (link) <https://www.weewx.com/docs/5.0/quickstarts/debian/> to install it. - That should run almost certainly without error on a pi to install a working setup using the Simulator driver - if you tried, but failed there, what exactly did you see in console/logfile output ? Again, please no screenshots. Copy/paste what you see as output - once you get the Simulator running, we can help you switch to getting data from the gw2000....if that is what you're trying to do You might start with the FAQ (link) <https://github.com/weewx/weewx/wiki/WeeWX-Frequently-Asked-Questions> and how to ask questions and provide enough detail that we can try to help. There's info there on how to find your logs as well. On Monday, March 18, 2024 at 12:17:38 PM UTC-7 Pi Radio wrote: > I have just joined, and cannot get my Raspberry Pi configured for my > Ventus W830 PWS. It is linked to various Online Weather sites including > Weather Underground via it's Display. I also have it linked to an Ecowitt > GW2000 that is not currently linked to any Online Weather sites. > > I have read the User Guide, and followed various Tutorials, but I am none > the wiser as to why it does not work? > > Is there a step by step guide that is written for a complete novice like > me to follow? > > Although the Ventus W830 is listed in the Compatible Hardware List as a > Fine Offset model it does not appear in the Available Hardware Types in the > Software on my Raspberry Pi. I have tried using Simulator, plus all of the > (dozen or so) options for the various types of PWS listed in the software. > > What am I not doing correctly, or what I have missed, I have no idea? I > have just followed the Instructions in the "Guide". But there still seem to > be lots of CRITICAL __main__: errors in Red, so it is a bit catistrophic? > > I am not a programmer, nor that familiar with a Raspberry Pi. All I know > is what I have been struggling with here, and following YouTube videos. > > Any help would be very, very much appreciated. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0db49652-ef8b-49ca-8a93-7ef885464f8fn%40googlegroups.com.
